SPECIAL REPAIRS TO BUILDING No P-73 IN 35 FD REGT AT MADUKKARI UNDER GE WELLINGTON

Amount

Demolition of cement Concrete unreinforced in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixture non shrinkadditive using 40 PSI purap complete and applying two coats of brush bond acrylic polymer modified cement based coating thicknness 1mm or two coats of pidifin 2K acrylic polymer water proof coating including necessary surface preparation, providing 20mm thick water proofing screed bed / plaster in cement mortar 1:4 mixed with conplast x 42IC @ 100ml or pidiproof LW @ 200ml per bag cement. Two coats of Nitro proof 100 bitumen based water proofing cover plastered surface complete all as specification of chemical resistant coating and all as specified and directed. Note: The work shall be executed through authorised applicator of M/s FOSROC/ PIDILITE using the amterials supplied by M/s Fosroc Chemicals India Pvt Ltd or M/s Pidilite Industrial Ltd and in accorfance with their respective manufacturers instruction.

400mm thick lime concrete with lime mortar 1:3 mix and 40mm graded brick coarse aggregate in sunken floors all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450mm x 350 x 7mm / 350mm x 250mm x 7mm to 8mm thick as in dados, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface, on including 10mm thick rendering in cement mortar 1:3 for fixing dado tiles complete all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed type C-21 with MS hinge pin 100 mm size all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 200 mm length all as specified and directed.

Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed

Anodised aluminium frame powder coated for doors, windows ventilators, U channels safety grill with one or more rebates including joining cleat for fixing complete all as specified and directed.

Anodised aluminium window and ventilator shutters, fixed type without sash bar aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws etc, complete all as specified and directed.

Supply only 4mm thick sheet figured glass and glazing with rubber packing aroud the glass square exceeding 0.50 Sqm in each pane complete all as specified and directed.

Stainless steel wire cloth fixed in repairs, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples in steel / wooden joinery etc all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:4 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

All as per item No 22 hereinbefore but 6 to 8mm dia as in stirrups all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Taking down existing drain/ soil/ waste/ vent pipes of any description and in amy position of any size all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches, in floors or fixed to walls complete all as specified and directed.

PVC (SWR) bends any radius, 110mm bore with oval access door complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches, in floors or fixed to walls complete all as specified and directed.

PVC (SWR) bends any radius, 75mm bore with oval access door complete all as specified and directed.

PVC (SWR) floor trap 63mm outer dia with grating including jointing with solvent cement all as specified and directed.

Cast iron nahani trap 50mm outer dia with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4 complete all as specified and directed.

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed.

Vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover, trap and connection to drain and flush pipe and fixed in repairs complete all as specified and directed.

Vitreous china squatting pan, Orissa pattern of size 580 x 440mm (white coloured) with integral foot rests (excluding flushing cistern and flush pipe) with P or S trap portion to match with existing surface of floor and fixed in repairs all as specified and directed.

Vitreous china bowl urinal flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white flat back size 550 X 400 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of taps, fixing of supply and waste pipe complete all as specified and directed.

Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

PVC connection 15mm size with PTMT length 600mm all as specified and as directed.

Angular Stop valves 15mm dia bore, cast copper alloy screwed down high pressure fancy type, chromium plated screwed both ends for iron pipe or unions fixed in repairs complete all as specified and directed.

Stop valves, fancy type, chromium plated with long shank and cup concealed type, chromium plated 15mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed

Brass chromium plated shower rose 100 to 125 mm size, swivel type with arm, fixing with 15mm dia pipe fixed in repairs all as specified and directed.

Bib tap 15mm dia, long body, cast copper alloy, fancy type chromium plated for kitchen sink screwed down, screwed for iron pipe or ferrule complete fixed in repairs all as specified and directed.

Tubular towel rail 20mm dia, 600mm long brass chromium plated fancy type with brackets all as specified and directed.

Dismantling of existing old padding concrete of any thickness of existing water proofing treatment over the RCC slab other than beams, chajjas, strircase etc by chipping of with proper tool viz chiesel and with applying reasonable force so as to avoid any damages existing RCC roof slab complete all as specified and directed.

Providing cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate average thickness 50mm as in levelling / padding course on roof slab, projections on similar surfaces existing with slope making the surface even and smooth without using extra cement including using liquid water proofing compound all as specified and directed. Note: Supply of Integral water proofing compound will measured and paid seperately.

Rendering 10mm thick fair faces of brick work or concrete surface in cement mortar 1:3 using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement compound all as specified and directed. Note: Water proofing compound will measured and paid seperately.

Supply only liquid water proofing compound all as specified and directed.

APP modified prefabricated polymeric water proofing membrane 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non-woven polyester matt black finished weighing not less than 100 gm/sqm having softning point less than 140 degree celcius longitudinal tensile strength not less than 300N/sqcm, side lap 10cm with torch application of membrane over compatible primer at 0.40 Ltr/sqm and aluminium paint at 0.10 kg/sqm finished on top complete all as specified and directed.

Dismantling PVC water tank exceeding 500 ltrs and not exceeding 1000 Ltr capacity from existing position all as specified and as directed.

Dismantling PVC water tank exceeding 1000 ltrs and not exceeding 2000 Ltr capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltr hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 2000 Ltr hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs of size 20mm dia minimum weight 142 gms, complete all as specified and directed.

20mm dia nipple of PTMT, suitable for HDPE water tank min weight 45 gms complete all as specified and directed.

Taking up / down steel tubing 20mm bore medium grade and connections, including cleaning for refixing all as specified and directed.

Taking up / down steel tubing 15mm bore medium grade and connections, including cleaning for refixing all as specified and directed.

25mm bore unplasticised PVC pipes including fittings of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

20mm bore unplasticised PVC pipes including fittings of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Applying two coats of oil bound distemper on surfaces of walls including complete removal of existing treatment and applying a coat of priming paint on old wall surfaces all as specified and directed.

Preparation of old decorated surfaces of ceiling (plastered or unplastered) and applying one coat of white washing complet all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete including tube light fittings, switches, ceiling roses, pendants, fan regulators, sockets etc and making good to the disturbed surfaces of walls, floors, roof etc all as specified and directed.

Point wiring with multistranded copper conductor 1.5 sq mm nominal cross-sectional area single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly One light point controlled by one switch 5 Amp one way complete all as specified and directed.

All as per item No 65 hereinbefore but one fan point controlled by one switch 5 amps and regulator all as specified and directed.

All as per item No 65 hereinbefore but one socket outlet 3 pin 5 amps on independent board all as specified and directed.

All as per item No 65 hereinbefore but for 4 Sqmm PVC insulated and PVC unsheathed copper multi stranded conductor cable and 4 Sqmm multi stranded copper conductor for earth wire for 3 pin 15 Amps power points all as specified and directed.

Switch piano flush type 5 A 240 volt SP, one way all as specified and directed.

Switch piano flush type 5 Amps SP, two way all as specified and directed.

Switch socket combination 2 in 1, 5 Amps multipurpose flush type all as specified and directed.

Switch socket combination 3pin 5A /15 A universal type, 2 in 1 all as specified and directed.

Stepped type electronic fan regulator flush type as required all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

LED light fitting bed side type wth high out put diffuser 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

LED light fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifie and directed.

LED light fitting mirror type with high out put diffuser 2 feet, 1x 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifie and directed.

Supply and fix in replacement MCB DB SPN 16 way suitable for single phase 240 volts with 200 amps rated bus bar double door type suitable for mounting incoming and outgoing MCB's single / double pole including dismantling of old existing complete all as specified and directed.

Supply and fix MCB SPN 40Amps all as specified and directed.

Supply and fix MCB SPN 32Amps all as specified and directed.

Supply and fix MCB SPN 20Amps all as specified and directed.

Supply and fix MCB SP 6 to 32Amps all as specified and directed.

Taking down sub main wiring of any size in any type all as specified and directed.

Taking down unserviceable main switch / DB with MCB of any type and capacity complete all as specified and directed.

Sub main wiring with two runs of single core 6 Sqmm copper conductor FRLS cable PVC insulated unsheathed multistanded 1100V grade drawn through PVC casing and capping with all accessories, fixed to wall ceiling etc including 6 Sqmm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100V grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note: 2 runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

Earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI earth wire 4mm dia protected by GI pipe light grade 15mm dia and connected to panel board / DB by means of bolts and nuts washers made out of GI all as shown in Electrical plate No 3 of SSR part I including necessary earth work and excavations in any type of soil, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 cover slab, reinforcement with 6mm dia MS bars at 100mm dia both ways, MS hook 6mm dia MS bars etc complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of flexible cable from ciling rose or connector to fan complete all as specified and directed.

UNIQUE INDIA CONSTRUCTIONS

VENKATESH

RAJASEKARAN

p.chinnasamy

Narendran Enterprises

ZOOM ENTERPRISES

M Govindarajan

M/S SHAJAHAN BUILDERS