Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.9 L
EMD Value
₹25,799
Closing Date
20 Nov 2026, 10:00 am3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE/MED
Office of the Executive Engineer Metropolitan Electrical Division Block-DF, Sector-I, 4th Floor, Jalasampad Bhawan, Salt Lake City, Kolkata -700091
Emergent restoration of Sluice gates consting replacement of 4 nos. Draw shutter, Hoisting arrangement, rubber seal etc. at Chingra G.P., within Block-Khanakul, P.S.-Khanakul, Dist.-Hooghly.
2026_IWD_5083496_1
WBIW/EE/MED/e-NIT-24/2026-27
Open Tender
MECHANICAL
Percentage
84 days
CHINGRA KHANAKUL HOOGHLY
Please refer Tender documents.
6 documents required · 6 mandatory
₹25,799
5 Nov 2026
5 Nov 2026
20 Nov 2026
5 Nov 2026
20 Nov 2026
5 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Taking out flap shutter of sluice gate including hoisting arrangement and refitting the same with new nut and blots where necessary. Up to 4.00 sq.m. | |||||
| 1.01 | Taking out and refitting the same. | 9.17 | SqMtr | 377.8 | ₹3,464.43 |
| 2 | Supply and Installation of Gearing arrangement comprising of high precision Bevel Gear & pinion on existing hoist nut along with supply, fabrication of suitable MS frame, Shaft, Plummer Block fitted with gun metal bush, flange coupling and required keys etc as per following specification and detail. Bevel Gearing specification: No of Teeth of Pinion (Zp) = 20, Gear ratio = 3:1, Module = 6 No of teeth of Gear (Zg) = 60
Material: HSLA steel
Finish: High precision.
Specification of other components:
a) MS frame shall be assembled with existing MS pedestal, capable to withstand static & dynamic load of Actuators. Approx weight is 15 kg (Deviation in weight shall be adjusted through the rate available in USOR (M&E) during billing/payment).
b) Shaft: 01 No, 30 mm Dia, length 450 mm approx., cut 08 Job per job with keyway, Matl-SS316.
c) Plummer Block: 02 No, ID-50 mm, fitted with Gun metal bush of thickness 10 mm. Matl: Cast steel.
d) Flange coupling: Hub flange coupling in pairs ID & OD = 30 mm & 100 mm respectively. Matl- Cast steel. | 2 | Job | 98,442.68 | ₹1,96,885.36 |
| 3Cross Bandth :-Supply of empty cement polythene bags in good condition including stacking and carraige cost to site, labour charge for filling gunny bags/polythene bags with all kinds of earth or sand wet or dry including sewing mouth and stacking within a lead of 150 Mtr. and all lifts as per direction of the engineer in charge (Filled up weight not less than 30 kg.)(Measurement to be taken up in stacks), labour charge for dumping filled up gunny bags/Polythene bags in standing or flowing water with or without boats inclusive of placing in position with all leads and lifts complete as per direction of E.I.C. | |||||
| 3.01 | Supplying to site empty cement polythene bags (capacity 50 kg) in good condition including stacking, incedental charges etc. all complete ( capacity 50 kg) | 2,050 | Each | 7.15 | ₹14,657.5 |
| 3.02 | Labour charge forfilling empty cement gunny bag / polythene bag (capacity 50kg) with all kinds of earth (wet or dry), sand or agreegates (stone/ brick) and sewing as done in case of cement bag,( typing with a knot after filling will not be accepted), and staking within a lead of 30 metre as per direction of E.I.C.( cost is excluding the cost pf any types of filling materials) | 2,050 | Each Bag | 8.34 | ₹17,097 |
| 3.03 | Damping in position are sand filled gunny / polybags ( capacity 50 kg) within a lead of 30 metre inclusive of all lifts. | 2,050 | Each Bag | 3.58 | ₹7,339 |
| 3.04 | Removing earth/sand filled poly bags/gunny bags from the channel bed/slope and initially depositing the same near channel bank at bed/slope and initially depositing the same near channel bank at a place as directed by the enginner - in charge for measurement of bag & then disposing off the same at a distance not less than 150 metre from the channel site. | 2,050 | Each Bag | 7.15 | ₹14,657.5 |
| 4 | Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge. | 100 | Hp Hours | 27.41 | ₹2,741 |
| 5Fabrication, supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries, Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
2911.pdf
Tender Documents • 0.41 MB
BOQ_5200915.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .