CE-MTPSI-SE-ES-CI-OT116-25-26

Charges for Removing, cleaning, transporting, servicing, air leak and operation checking, re fixing and checking of Retractor Assembly of HEA Ignitors and power Cylinders.

Charges for disconnecting the connectors of the flame scanners, removing from the Boiler guide pipe assembly, transporting to work bench, dismantling & Reassembling the scanner head assembly from scanners, removing, cleaning & refixing the lenses, servicing and checking of flame scanners.

Charges for removing, transporting, cleaning and refixing after calibration local pressure gauges/ temperature gauges.

Charges for Removal of Pressure/DP/temperature switches and refixing them after calibration.

Charges for dismantling, transporting, cleaning and refixing them after calibration of Pressure Transmitters and Temperature Transmitters.

Charges for removing from field, transporting to LAB, cleaning, calibrating, and refixing after calibration of air regulator with gauges.

Charges for removing from field, transporting to LAB, cleaning, re fixing after calibration of I/P converter.

Charges for opening and cleaning of 1/2" impulse line and catch pot in mills, Flue gas, primary and secondary air paths.

Charges for releasing of Electroniccards , cleaning of panels & reinserting the cards, terminal tightness checking of FSSS DCS , Feeder, HYDRASTEP, Flame scanner, 110 V AC & 220 V DC distribution panels and CHARGER Panels.

Charges for removing the terminal connections, Replacing the broken Terminal Blocks and reconnecting the terminal connections and checking in Various Junction boxes at Boiler and mill area.

Charges for removing, cleaning solenoid valves, air filter cum lubricator & the airlines and replacing the ‘O’ rings in the solenoid valves and refixing the solenoid valves, air filter cum lubricator & the airlines in the HAGs.

Charges for cutting and welding of take-off catch pot in mills, flue gas, primary and secondary air path.

Charges for single point cutting and welding of pipe size ½” impulse lines of mills, flue gas, primary and secondary air path including cost of gas, welding electrodes & consumables such as cotton waste, hacksaw blade, etc.

Charges for painting with 2 coats for any electrical equipments. (Ignitors 12 Nos x 0.95=11.4 mtr² and SADC 48 Nos x0.9=43.2 mtr²)

Charges for removing the cotton pins, disconnecting the air lines, Removing the positioner from the boiler wall mounting, transporting to work bench, cleaning, replacing the seal kit and bellows, checking and refixing of SADC positioners.

Various sizes of U seal (84 Nos.) for work Sl. no.1(As per Data sheet-1)

Lens (40 Nos.) for work Sl. no.2 (Plano Convex lens : 20 Nos. & Plain lens : 20 Nos.)(As per Data sheet-6)

Bellows for work Sl. no.15

Various sizes of ‘O’ rings (60 Nos.) for work Sl. no.12(As per Data sheet-2)

F Ring (5 x 9.5 x 1.3mm) for work Sl. no.12

Various sizes of U seal (12 Nos.) for work Sl. no.12(As per Data sheet-3)

Metallic Paint for work Sl. No.15(As per Data sheet-4)

Brushes for Painting. For work Sl. No.14

Enamel Thinner for work Sl. No.15

Rust Remover (CRC) for work Sl. no: 1,2,10 & 15 (500 ml)

Hackshaw Blade for work Sl. no: 12

Nada for work Sl. no: 15

2.5 Sq.mm Elmax Terminal Block for work Sl. no: 11

Cost of Consumables such as 2.5 mm welding rod electrode, Dungry cloth, Cotton Waste, Petrol, Teflon Tape, PVC Insulation tape & Dentrite.(As per Data sheet-5)