Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.8 Cr
EMD Value
₹7.4 L
Closing Date
20 Mar 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
S S Sobarad
Improvements & Widening of Badami Godachi Gokak Falls Road (SH-134) from Km 37.70 to 42.00 of Ramdurg taluka
PWD/2023-24/RD/WORK_INDENT9938
PWD/2023-24/RD/WORK_INDENT9938
Open
Roads
Two Tender Document System(Two Cover)
PWD Division Office Belagavi
12 documents required · 12 mandatory
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23 Achieved in at least two financial years an annual financial turnover (in all classes of civil engineering construction works only) of Rs.988.31 Lakhs.
To qualify for award of this contract, each Tenderer in his name should have in the last five years 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23 Satisfactorily completed, as prime contractor, at least one similar nature of work such as Improvements of Road work of value not less than Rs.247.08 Lakhs.
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23 executed the following minimum quantities of work Earthwork excavation in foundation/Subgrade & Earthen shoulder 9693 Cum, GSB 3015 Cum, WMM 3740 Cum, Asphalting Works (BM/DBM/SDBC/BC) 1419 Cum, Concrete Work (PCC/RCC) 26 Cum, Steel Reinforcement 0.70 Tonne.
Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded
Information on works which are yet to be completed, Information of the works for which Tender Acceptance letters are recieved, Information of the works for which Tenderer has submitted Tender, Information on litigation in which the Tenderer is involved
Assessed Tender Capacity shall be more than the Tendered Amount
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity equal to ( AxNx1.5 - B ) where A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2022-23 price level) taking into account the completed as well as works in progress. 0.75 Year where B equal to Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 0.75 Year form the probable date of Award of this contract.
Latest Income Tax Clearance Certificate
Each Tenderer should further demonstrate- liquid assets and/or availability of credit facilities of not less than Rs.164.72 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Enclosed with this NIT under Forms of Bid qualification information as per Govt. Circular No. FD-CAM/16/2022(P-2), dated. 22.08.2022).
The tenderer should be a KPWD registered Class-I and Above Contractor
The EMD of Rs. 7,41,300.00 shall be paid in full through e payment or in two parts i.e. part (1) Rs. 1,00,000.00 by e -payment Part (2) Rs.6,41,300.00 EMD shall be in the form of Bank Guarantee and shall be scanned and uploaded along with the technical Bid. The original Bank Guarantee should be handed over to the Executive Engineer before the prescribed date and time of opening of the Bids.
Availability by owning at least 50 percentage of the required /specified key and critical equipment for this work and b) the remaining 50 percentage can be deployed on lease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are to be furnished Excavator (Hydraulic Excavator/Backhoe Loader) Hired 2 Nos., Tipper Own 2 Nos. - Hired 2 Nos., Road Grader/Motor Grader Hired 1 No., Hot Mix Plant(40/60 TPH) Own 1 No., Pug Mill (Wet Mix Plant) Own 1 No., Mechanical Paver Finisher Own 1 No., Vibratory Road Roller Own 1 No. - Hired 1 No., Vehicle Mounted (Tank) Mechanical Sprayer Own 1 No. - Hired 1 No., Self Loading Concrete Mixer /Mechanical Concrete Mixer with Hopper Own 1No. and Water Tanker Hired 2 Nos.
Constitutional and Legal Status of the Tenderer
Principal Place of Business (Full address)
Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers and Bankers
The proposed methodology and program of construction, backed with equipment planning and deployment duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion
Information on litigation in which the Tenderer is involved
Unique Document Identification Number (UDIN) for Practicing Chartered Account is Preffered
₹5,000
₹7.4 L
11 Mar 2024
11 Mar 2024
21 Mar 2024
18 Mar 2024
16 Mar 2024
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref MORTH Specification...
Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rol...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mecha...
Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom
Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-40 @ 3.4% by weight of mix, transported t...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical pecifications,including setting out, shoring,strutting, barricading, caution light...
Providing and laying in position plain cement oncrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Providing and laying reinforced cement concrete pipe NP3for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, ...
Road Maintanace for 3rd, 4th & 5th year
Road Maintenance for 3rd year for road with BM+SDBC as wearing coat
Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road. Maintenance of surface drains by...
Road Maintenance for 4th year for road with BM+SDBC as wearing coat
Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road Maintenance of surface drains by ...
Road Maintenance for 5th year with BM+SDBC coat as wearing coat
Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road Maintenance of surface drains by clea...
Renewal of SDBC (6th year)
Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IR...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT kppp_formats.xls
Others - NIT kppp formats • 0.11 MB
government notification bc loc letter to be issued by the bank.pdf
Others - Bankers Certificate or Line of Credit GO & Format • 1.73 MB
9938 Bid doc kw 4.docx
Tender Document • 1.34 MB
technical specifications.zip
Others - Technical Specifications • 0.30 MB
9938 Estimates.zip
Others - Estimates • 8.80 MB
star rate g.o_IMG 1.jpg
Others - Star Rates GO • 0.02 MB
star rate g.o_IMG 2.jpg
Others - Star Rates GO • 0.02 MB
star rate g.o_IMG 3.jpg
Others - Star Rates GO • 0.02 MB
star rate g.o_IMG 4.jpg
Others - Star Rates GO • 0.02 MB
bg_emd.jpg
Others - BG-EMD GO • 0.24 MB
appeal go.pdf
Others - Appeal GO • 0.93 MB
kmmcr.zip
Others - KMMCR GO • 0.33 MB
royalty go.zip
Others - Royalty GO • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .