SPECIAL REPAIRS TO ROOF RETREATMENT TO CERTAIN BUILDINGS AT HQTC BANGALORE

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foudation etc, or for shafts, wells cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil etc comlete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil for laying of cable trenches etc comlete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil etc comlete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation etc comlete all as specified and directed.

Removal of surplus soil (excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point etc comlete all as specified and directed.

Removing excavated materials out side MoD land exc 5Km but n.exc 15 km and depositing where directed at a level not exceeding 1.5m above the starting point in soft/loose soil etc comlete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces etc comlete all as specified and directed.

M & L cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete etc comlete all as specified and directed.

M&L Providing, cement concrete Cement concrete type B-1,20 mm graded aggregate, 1:2:4 in roof kerbs or mud stops, rounded or chamfered on edges etc comlete all as specified and directed.

M &L for providing cement concrete type B1,1:2:4 (20 mm graded aggregate) as in copings including formwork etc comlete all as specified and directed.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete etc comlete all as specified and directed.

M&L for providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete in walls all as specified and directed.

M&L for reinforced cement concrete type B1-1:2:4 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc comlete all as specified and directed.

Supply and spread dry clean river sand in trenches for cable cushioning all as directed and specified.

Supply only integral water proofing compound

Cutting chases, pinning in stone/ concrete block/ RCC slab wall making good to facings where required and pointing in ement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc comlete all as specified and directed.

Supply and lay Burnt brick protection of UG cables sub class 'B' of designation of 75 of standard size laid dry in trenches etc comlete all as specified and directed.

M&L for stone Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 etc comlete all as specified and directed.

M&L for 20mm thick Granite of any type work (table rubbed and polished) in cooking plateform, widow sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick screed bed in CM 1:6 etc comlete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc comlete all as specified and directed.

M&L for form work to sides and suffits of floor or roof beam, beam haunchings, girders, bressumers, lintels, cantilevers, shelves, including supports overhangs, etc finished rough in flat surface.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) wooden not exceeding 1.5 Sqm each etc comlete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc comlete all as specified and directed.

M&L framed work as in grills ,railing and similar work with ends of bars shouldered and /or riverted or forged into spikes using rolled MS section confirming to Fe 310-0 etc comlete all as specified and directed.

S&F for Mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers and similar small articles conforming to FE-290 Gde-E-165 etc comlete all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and spirally binding with MS wire annealed not less than 0.9 mm dia etc comlete all as specified and directed.

All as per item No 26 here in above but 6mm dia and over as in stirups etc comlete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 etc comlete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc. etc comlete all as specified and directed.

S&F anodised aluminium frame powder coating, for doors, windows, ventilators, Partition/fixed type windows, aluminium grill etc. with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated anodised aluminium sliding window and ventilator shutters, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-charge.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws etc comlete all as specified and directed.

Taking down old damaged existing water proofing membrane of any thickness from roof top complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for water proofing treatment on horizondal or vertical surfaces by applyong oil bound bitumen primer & 0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not lesss than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10 cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminus aluminium paint/primer @ 0.1 Kg/Sqm over RCC roof slab/ projection/ parapet after cleaning the surfaces by removing dust dirt etc as manufactures instructions complete all as specified and directed.

M&L for digging out roots of bushes, small trees, grass of any dia & girth from accessible roof projection, chajjas, wall junction, parapet etc at any height by necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded stone aggregate) and necessary rendering of cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed.

“S& F for 16mm thick gypsum board false ceiling boards fine fissured DUNE RH- 99/ OPTRA RH 95 Bevelled regular for insulation and acoustic purposes (Make:- Armstrong), size of 600mm x 600mm x 16/15mm thick fixed with Armstrong SL2/K2C2 frame and suspension system (Cat No - PRELUDE 24 for 15.34 Kg wt) in GI grid powder coated snap grid ceiling frame with suspendor of required length, fixed with dash through fastener bolt of approved quality 04 Nos per sqm including necessary cutting securing and making good to disturbed surface etc. complete all as specified.” Make armstrong or equivalent in Gypboard/Anchor ceiling tiles/Bison panel

S&F Prelaminated medium density fibre particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc comlete all as specified and directed. Make:- Novapan/Eco Board Industries/Kitply/Green Ply/ Anchorlam.

Supplying & fixing of Intermat auto closing concealed hinge, etc complete all as specified and directed. Make :- Kutchina'/Hettich/Hafele.

Supply & fixing of 6" premium quality crome finish Handle etc complete all as specified and directed. Make :- Kutchina"/Hettich/Hafele.

Supply & fixing of good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long etc complete all as specified and directed. Make :- Kutchina"/Hettich/Hafele.

S&F 19-20mm wide and 0.80mm thick decorative type PVC beading etc complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring etc complete all as specified and directed.

M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) etc complete all as specified and directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc complete all as specified and directed.

M&L for glazed ceramic coloured/ digital wall tiles in vertical surface 350x250x7mm/ 450x300x7mm/ 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc complete all as specified and directed.

All as per item No 48 here in above but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc complete all as specified and directed.

M&L for chequered cement concret tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with white cement & pigments in floors over 20mm thick screed bed of cement mortar 1:6 etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 with and including water proofing compound @ 0.4% by wt. of cement, on concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.

Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement etc complete all as specified and directed.

Rendering 10mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 with water proofing compound, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, RCC slab etc. including racking out joints, hacking for key, scrubbing down with water, etc. all as specified for 5th floor and above including necessary scafolding etc complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for Two coat of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface etc complete all as specified and directed.

M&L for Two coat of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces etc complete all as specified and directed.

M&L for 2 coat of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces all as specified for 5th floor and above including necessary scafolding etc complete all as specified and directed.

M&L for preparing new plastered on wall and applying three coats of white wash etc complete all as specified and directed.

M&L for preparing new plastered on ceiling and applying three coats of white wash etc complete all as specified and directed.

S&F Sheet glass, of 4.0mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each etc complete all as specified and directed.

M&L for two coat of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described etc complete all as specified and directed.

S&F in repairs premium quality Single Lever Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) etc complete all as specified and directed. Make Jaguar cat part No OPP-15125PM/ ORP-10125PM or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System etc complete all as specified and directed. Make Jaguar OHS-35497 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Shower Arm 600X25X25mm Square Shape for Wall Mounted Showers with Flange etc complete all as specified and directed. Make Jaguar SHA-455L600 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Hand Shower ø105mm Round ShapeMulti Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System etc complete all as specified and directed. Make Jaguar HSH-1721 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Flexible Tube 12mm dia & 1.5M Long with Nuts etc complete all as specified and directed. Make Jaguar SHA-549D12 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Wall Bracket for Hand Shower, ø35mm & 100mm Long Round Shape etc complete all as specified and directed. Make Jaguar SHA-555 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) etc complete all as specified and directed. Make Jaguar ALD-577 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality 2 Way Bib Cock with Wall Flange etc complete all as specified and directed. Make Jaguar OPP-15041PM/ ORP 10041PM or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses etc complete all as specified and directed. Make Jaguar cat part No OPP-15011BPM/ ORP-10011BPM or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Bib Cock with Wall Flange etc complete all as specified and directed. Make Jaguar OPP-15037PM/ ORP-10037PM or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Angular Stop Cock with Wall Flange etc complete all as specified and directed. Make Jaguar OPP-OPP-15053PM/ ORP 10053PM or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs premium quality Wall to wall shower enclosure with two fixed toughned glass (five level testing of toughness) and provn of sliding door in between Glass: 8mm Finish: Chrome Height : 2000mm W: 2000 - 2200mm including all necessary hinges, Connector, Floor Clamp, Stablizer Rod, Towel Rod/Door Handle, Knob, Roller made of brass with nickel and chrome plating and plastic part etc complete all as specified and directed. Make Jaguar or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Rimless Single Piece-WC with UF slim seat cover, Hinges, Fixing accessories and Accessories Set, Cistern Fittings, Size: 380x670x765 mm, S Trap - 300mm etc complete all as specified and directed. Make Jaguar FSS-WHT-29853S300UFSM or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Table Top Basin, Size: 565x425x140 mm etc complete all as specified and directed. Make Jaguar KUS-WHT-35935 or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror etc complete all as specified and directed. Make Jaguar ACN-1193N or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Shower Basket Large etc complete all as specified and directed. Make Jaguar ACN-1179N or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Towel Rack with Lower Hanger (Stainless Steel) with hook etc complete all as specified and directed. Make Jaguar AHS-1581H or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Toilet Roll Holder with Stainless Steel Flap etc complete all as specified and directed. Make Jaguar AKP-35753PS or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Soap Dispenser with Glass bottle etc complete all as specified and directed. Make Jaguar AKP-35735P or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Towel Ring Square etc complete all as specified and directed. Make Jaguar AKP-35721P or equivalent in parryware/ Cera/ Hind Ware.

S&F in repairs Soap Dish Holder etc complete all as specified and directed. Make Jaguar AKP-35731P or equivalent in parryware/ Cera/ Hind Ware.

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including Taking up or down steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.

All as per item No 86 here in above but 20mm bore etc complete all as specified and directed.

All as per item No 86 here in above but 25mm bore etc complete all as specified and directed.

S&F tubes 15mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing etc complete all as specified and directed. .

S&F tubes 20mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing etc complete all as specified and directed.

S&F in repairs 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs 6mm thick mirror of any size including rounding and polishing of edges with necessay hinges, Knob, screw made of brass with nickel and chrome plating fittings and decorative mat finished wooden beading n.exc 5cm width etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity in litres exc 250 & n.exc 500 and cleaning etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity in litres exc 500 & n.exc 1000 and cleaning etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. After cleaning repairing, and removing all scale dirt and wiping, drying etc complete capacity in litres exc.1000 and n. exc 2000 ltr (cylindrical vertical with closed top) etc complete all as specified and directed.

S&F grating doom 100mm dia with or without waste hole of crome finish etc complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 150mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, fixed to wall etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends of any radius etc complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) Junction single (Single T) equal or unequal etc complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110mm bore vent cowl etc complete all as specified and directed.

S&F in repairs PVC (SWR) 'P' or 'S' trap 110mm bore etc complete all as specified and directed.

S&F in repairs Low density polyethylene (LDPE) pipes 32mm dia, of pressure rating 6 kgf/sq. cm etc complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm etc complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and directed.

Demolition mud/mud phuska in roofs any thickness including plastering tiling and leepig (wheather full thickness removed or only a part thereof etc complete all as specified and directed.

Removing demolished material ie building material concrete stone masonary debris tree roots trunk branches of any type etc to a distance of 30 km or beyond out of premises of metropolition area including loading , unloading by manuallly or by mechanical means (JCB and to be transported through tractor trolly or tipper and staking at the destination as and when directed by Engineer in charge during execution etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5core etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings complete as directed and removing retrieved materials and making good the disturbed surface all as specified and as directed.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC conduit ISI marked as approved with all accessories and fixing arrangements on wall/ceiling with acessories like modular metal flush board, modular white cover etc, fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light point controlled by one single pole 5 Amps switch

One fan/ exaust fan point controlled by one single pole 5 Amps switch

One switch socket out let point 5 Amps on same board with other switches

One switch socket out let point 5 Amps on independent board

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC Conduit ISI marked, broken white/or of cream /grey colour. with all accessories and fixing arrangements on wall/ceiling with acessories like modular metal flush board, modular white cover etc, fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for one 15A Switch Socket Combination on independent board all as specified and as directed.

M&L for Chases cutting in wall/ ceiling for point wiring etc complete all as specified and directed.

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.

Supply and fixing modular swich one way 6 Amps, 230 volts all as specified

Supply and fixing modular socket, 6 Amps 2/3 pin combined two module, 230 volts all as specified

Supply and fixing modular socket, 6 A/16 Amps 2/3 pin combined two module, 230 volts all as specified

Supply and fixing modular swich one way 16 Amps one module, 230 volts all as specified

Supply and fixing modular white cover suitable with frame 2 module etc complete all as specified and directed.

Supply and fixing modular white cover suitable with frame 4 module etc complete all as specified and directed.

Supply and fixing modular white cover suitable with frame 6 module etc complete all as specified and directed.

Supply and fixing modular white cover suitable with frame 8 module etc complete all as specified and directed.

Supply and fixing modular metal flush board 1/2 module etc complete all as specified and directed.

Supply and fixing modular metal flush board 4 module etc complete all as specified and directed.

Supply and fixing modular metal flush board 6 module etc complete all as specified and directed.

Supply and fixing modular metal flush board 8 module etc complete all as specified and directed.

M&L for taking out fans any type and any capacity, and re fixing along with any minor fixing acessaries etc complete all as specified and directed.

M&L for taking down carefully Spilit type Air conditioner from wall/ceiling etc and refixing along with any minor fixing acessaries and addl gas charging etc. complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm etc complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light 4 feet connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size etc complete all as specified and directed.

M&L for taking out Geyser any capacity, and re fixing along with any minor addn/ altn etc complete all as specified and directed.

Supply and laying of sub main wiring with 2 single core PVC insulated cable with copper conductor multistranded 1100 volt grade 4.0 sqmm in PVC conduit/ casing caping and including 1x2.5 sqmm PVC insulated multistranded copper conductor and connecting to main earth dolly complete all as specified and directed, incl taking out old sub main wiring etc complete all as specified and directed.

Supply and laying of sub main wiring with 6 single core PVC insulated cable with copper conductor multistranded 1100 volt grade 4.0 sqmm in PVC conduit/ casing caping and including 2x4 sqmm PVC insulated multistranded copper conductor and connecting to main earth dolly complete all as specified and directed, incl taking out old sub main wiring etc complete all as specified and directed.

M&L for taking out LT panel board any size/Capacity, etc complete all as specified and directed.

Supply, installing, testing and commisioning and design of factory made powder coated (CPRI approved) out door type, dust & vermin proof, LT feeder piller box made out of 3.0mm thick CRCA steel sheet of suitable size and and angle iron 50x50x6mm, grouted in PCC M-10 using 20mm graded stone aggregate including bus bar, internal wiring with PVC insulated, single core copper conductor cable of suitable size duly numbered with tags for the circuits with hinged double door shutters (front & rear), cubical type with locking arrangement and slanted roof. The size of panel board shall be 3 phase, 440VAC, 50Hz supply system. the panel board shall comprise of following items and all as specified in SSR part -I clause No 19.21 and connecting up all the LT UG cables. Busbar: 200 Amps rated copper busbar TPN duly insulated with PVC Sleave asper standard colour code and rigidly mounted on backalite/ DMC insulated bus bar support ((square/ round) insulators of suitable size and good insulation resistance. Incoming :- (a) On load change over switch, 4 pole, 415 volts,50 Hz,125 Amps -1 Nos (b) MCCB, 4 pole, 415 volts,50 Hz,125 Amps36KA breaking capacity -1 Nos with thermal magnetic release, adjustable Over load and short circuit settings. (b) Volt/ Amp meter with CTs of Suitable capacity-1Set. (c) Indicator lamp LED type R-Y-B-1 set. Outgoing:- (a) MCB TPN, 415 Volts, 50Hz, 63 Amps - 1No, (b) MCB TPN, 415 Volts, 50Hz, 40Amps - 1No, (c) MCB SPN, 240 Volts, 50Hz, 32Amps - 8 Nos, (d) MCB SP, 240 Volts, 50Hz, 6 to 32Amps - 12 Nos,

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth strip 25x4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part I connected to earth test point all as specified or indicated including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 40mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 20mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion , complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure etc complete all as specified and directed.

N RAJEGOWDA and CO

Behl construction co.