Repair/renovation of Special Bungalow No. 3 at Gandhi Nagar Jammu. CNO-647 NP

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing of following Sanitary items fittings of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent ). Providing and fixing of short Body Bib Cock

Providing and fixing of long nose

Soap Dish Holder

Soap Dispenser bottle

Providing and fixing of CP Brass angle valve of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent )

providing and fixing of wall bend mixer/ Sink Mixer of jaquar, cera or essco

Providing and fixing of central hole basin mixer of jaquar, cera or essco

Providing and fixing of Single Towel Rail 600mm of jaquar, cera or essco

Providing and fixing of Towel Ring Square of jaquar, cera or essco

Providing and fixing of over head shower 150x150 of jaquar, cera or essco

Providing and fixing of Hand shower of jaquar, cera or essco

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing toilet paper holder C.P. brass

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

C.P. Grating

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 6 mm ply (Archid, Century, green

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 19 mm ply (Archid, Century, green )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 0.8 mm thick Sunmica (Virgo )

Providing and fixing of following items of approved make /quality including fixing carriage etc. complete job as directed by E.I.C 1 mm thick Sunmica (Virgo )

Providing and fixing of following hardware items fittings of approved make / specification as directed by E.I.C . MULTIPURPOSE LOCK

S.S. hinges 3"

S.S. hinges 4"

Folding handles 6"

Sliding channel 20"

S.S. handle 6"

Edge tape 20mm

auto hinges

hydraulic hinges

steel pawa 4''

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 300x10 mm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 9.98.1 300x16 mm

proving &fixing ISI marked almunium hanging floor door stoper ,ISI marked andized with neceesay screw etc complete single rubber stopper

providing and fixing of SS curtain rod along with brackets , wall to wall fittings with complete job

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

labour for shifting of debries /mulba from roof ,stairs momties etc and adjoining area of blocks to the dumping sites by engaging labours and other miscellenous works

carpenter helper

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Arer of slab over 0.5 sqm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

p/fixing of flush door of approved make fixed with 1mm mica on both side including all fiiting and locks

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class teak wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class teak wood

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50 x 12 mm

Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class teak wood

Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge

French spirit polishing, Two or more coats on new works including a coat of wood filler

SS Handels 12''

SS handels 8''

SS Handels 6"

Brass Handle 12"

mortice latch and lock

Brass Handle 12"

providing and fixing of wooden flooring of specified shade and brand as per direction of engineer in charge including base coat of foam complete job.

Providing and fixing of Casement door/window single panel with Aluminium hinges with SS304 pin, multi-point locking system with cylinder lock, Aluminium / Zamak powder coated handles on both sides, installed with alass of 5 to 34 mm thickness (choose any one). System of frame size 50mm x 63mm & sash of size 60mm x 98mm. Frame (except bottom) and Sash corner will be 45° mitre joint joining by Cleat with Allen screw of SS 304 grade Frame bottom has low threshold profile of height 9mm will be 90° joint with screw SS304

Providing and fixing of Plated mesh comprising of Aluminium Track 1.1 +/- 0.2mm of and fibre mesh of weight 85gm/sqm., all complete as per architectural drawings and the directions of Engineer-in-Charge. With complete job.

Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with :

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 g/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.

Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

1mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Finishing walls with Acrylic smooth exterior paint of required shade: 13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Engage Trolley for shifting of mulba from site to outer area of municipality

Please Enable Macros to View BoQ information