Supply Installation Testing and Commissioning of facade Illumination to Shree Nagesh Maharudra Sausthan Ponda Goa

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W, Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90, THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK08, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 100W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W, Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90, THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK08, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based Linear wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable Aluminum Extruded /SS surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 20W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W,  Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90,  THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK07, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 Projector LED, DMX based Projector Spot light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 17W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W,   Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90,  THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK07, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50,000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX based Spot light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing. Power consumption: 09W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W,   Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX. The luminaire should offer channel options of 4 channels, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90,  THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK07, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50,000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based Linear wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable Aluminum Extruded /SS surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 30W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W,  Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90,  THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK07, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based Linear wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable Aluminum Extruded /SS surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 40W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W,  Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90,  THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK07, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based Linear wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable Aluminum Extruded /SS surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 20W, CCT: RGBW (3000K/6500K) (as per the design approval), Luminous efficacy >45lm/W,  Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°/ Asymmetrical deg as per the design approval, A soft copy of the IES file, catalogues, polar diagrams, cone diagrams shall be submitted along with the bid, Colour Rendering Index (CRI)>80 for white LED, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver Class III having the efficiency >90,  THD <10%, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, IK07, IP66, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be CREE, LumiLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory having the L70B50, 50000Hrs at 25 Deg C or better. Power & DMX Loop In/Out along with IP67 connector having the length >300mm. Certifications: CE, RoHS, BIS with valid R number must be submitted along with the bid as directed by the Engineer- in charge.

SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval as directed by the Engineer- in charge.

SITC of Aluminium Profile for Neon flex as directed by the Engineer- in charge.