SPECIAL REPAIR TO GOVT MD ACCN BLDG NO P-50 AND P-51 OF MANDIR COLONY AT COD UNDER GE (EAST) JABALPUR

M&L for Water Proofing Treatment on "Non Approachable/Non Accessible roof" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces complete all as specified and directed.

M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction complete all as specified and directed.

M&L for preparation of new or previously untreated APP based polymeric membrane surfaces & applying two coats of bituminous based Aluminium Paint complete all as specified and directed.

Supply only liquid water proofing compound ISI marked

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs & tiles of any description or thickness in floors, aprons etc., laid bedded & pointed in any mortar. Complete all as specified and directed.

M&L for Non Skid Coloured Ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for Non Skid Coloured Ceramic tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar complete all as specified and directed.

M&L for Glazed Coloured Ceramic tiles 350 x 250 x 7 mm/450 x 350 x 7 mm thick in vertical surface such as dado/skirting/risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, tread landing, dado & pillar over & including rendering 15 mm thick in 1:4 cement mortar, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & no pigment complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering & consolidation complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for coloured rubber moulded chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment laid over & including 20 mm thick screed bed or bedding layer of 1:6 cement mortar complete all as specified and directed.

M&L for Machine cut Cudapph stone slab as in cooking platform/shelf 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete Type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick Cement Concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection etc & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.

M & L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in half brick thick walls, built in CM (1:6) complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on wall complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over & including one coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint & including 2 mm wall care putty complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coat of white wash complete all as specified and directed.

M&L for preparation of old painted brick work or plastered surfaces & applying two coat of cement based paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and apply two coat of white wash complete all as specified and directed.

M&L for preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, min triple layer, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old unserviceable water storage tank and removing to store complete all as specified and directed.

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed.

Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls or ceilings or laid in floors/trenches complete all as specified and directed.

Supplying & Laying of 20 mm outer diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying & Laying of 25 mm outer diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

Repairing sunken floor leakage as per following steps:- Surface preparation:- (i) Prior to application of Dr fixit powercrite, ensure to clean the substract which shoud be free from all the dust, foregn particles, loose aggregate and oil grease etc. This can be done with the help of scarifying, grinding water jetting and sand blasting etc. (ii) The surface should be wetted well prior to application throughly with water to get SSD condition. (iii) All the depression or pin holes/pot holes to be repaired using Dr Fixit powercrete method mortar in mixing ratio of (1 kg cement : 1.50 kg silica sand : 0.50kg of Dr Fixit powercrete). Coating application:- (i) Mix Cement with Dr. Fixit Powercrete in ratio of 1 : 0.50 ( 1 kg cement OP C53 : 0.50 Dr. Fixit Powercrete ) by weight. (ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained. (iii) Apply first coat over SSD/wet condition substrate. (iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas. (v) Using a nylon brush, apply a coat of Dr. Fixit Powercrete coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of Dr. Fixit Powercrete slurry coating over the surface. (vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage.

Curing:- (i) Allow Dr. Fixit Powercrete coating to air cure for 3-6 hours after the final coat. (ii) Do not allow the rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition. (iii) However, a moist curing after the air drying is advisable. (iv) Following the moist curing, Dr. Fixit Powercrete coating shall be allowed to air cured for 3 days before submerging it in water. Note - The above procedure is given for Dr Fixit Powercrete, any other equivalent make may please be used as per their manufacturer instruction subject to approved by Engr-in-Charge.

S&F in repair 15 mm bore, fancy type, chromoium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed.

S&F in repair, 32 mm dia of bore, waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair, Health Faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed.

S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed.

S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair, plastic water closet seat cover, white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed.

S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed.

S&F in repair, 10 litre capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair, 125 mm size, brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flanges etc complete all as specified and directed.

S&F in repair, Brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed.

S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair, toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed.

Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. Note : Stainless Steel butt hinges & necessary S.S screws shall be paid separately.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) skelton door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. Note : Stainless Steel butt hinges & necessary S.S screws shall be paid separately.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 100 mm stainless steel butt hinde and fixed with SS screws complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed.

Taking down old wooden/wood based particle board & S&F 18/19 mm thick high density PVC solid fibre board duly laminated 2mm thick prelaminated PVC sheet on front face (ISI mark) etc in kitchen cupboard /drawer/ Wardrobe etc complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, including bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F Heavy Duty mild steel Drawer Channel Slides for kitchen and Wardrobe ( telescopic design) of specified length up to 35 cm complete all as speicified and diretced

S&F in repair,mild steel drapery rod, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed.

S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.

Providing and fixing of double rebate openable/fixed windows (Eco 4000) made of galvanized steel colour coated/powder coated (base steel as per IS 513 of "D" quality, gavanized as per lS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50- 60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 X 20 mm and the fixed glass beading section 12x 12 mm, outer frame and mull ions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4 mm thick plain clear glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc.all as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed

Provinding and fixing of Ventilators Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls including including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc by means of self expanding ScrewSll as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed

M&L for concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

M&L Salt-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed..

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed.

Taking down carefully any type of old unserviceable submain wiring with PVC/steel conduit surface / concealed or wooden battens etc and making good the disturbed surfaces to match with the existing surface complete all as specified & directed by Engineer-in-Charge.

Taking down carefully any type of DBs including MCCBs and MCBs for keeping the old materials into safe custody or for taking credit(credit for above items should be made as per condition seaparately) and making good to the disturbed surface etc complete all as specified and directed.

M&L for point wiring for One light Point controlled by one switch 5/6 Amps with FRLS PVC insulated unsheathed multistranded copper conductor, conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn through and including 20 mm size 'medium grade' PVC doubled lock Casing-Capping/PVC Conduit pipe and fittings, including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories and making good the disturbed surfaces and match with the existing surfaces complete all as specified and directed.

All as per item No 110.00 here-in-before but for one Ceiling fan/Exhaust fan Point controlled by one switch 5/6 Amps.

All as per item No 110.00 here-in-before but for one Bell/buzzer Point controlled by one push button switch 5/6 Amps .

All as per item No 110.00 here-in-before but for one socket point 5/6 Amp controlled by one switch on same board.

All as per item No 110.00 here-in-before but for one socket point 5/6 Amp controlled by one switch on Independent board.

All as per item No 110.00 here-in-before but for one light point controlled by two way switch.

All as per item No 110.00 here-in-before but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board

All as per item No 110.00 here-in-before but with 1100 Volts grade copper stranded conductor FRLS cable of size 4 Sqmm main & with 4 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board.

Material and labour for Casing-Capping/PVC Conduit sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked good to walls, floors etc complete, all as specified and as directed. NOTE: Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F call bell multi music type suitable for AC 230 volt single pole complete all as specified & directed.

S &F Lamp holder, PVC/ polycarbonate type with back plate for angle holder all as per specified and directed.

S&F ceiling rose surface type 60 x 30 mm three terminals of polycarbonate body complete all as specified & directed.

S&F modular switch 6 Amps one module 230 volts AC complete all as specified and as directed.

S&F modular switch 16 Amps one module 230 volts AC complete all as specified and as directed

S&F modular socket, 6A -2/3 pin combined 2 module,230 volts AC complete all as specified and as directed.

S&F modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed .

S&F modular bell push , 6 Amps, 1 module complete all as specified and as directed.

S&F modular switch two way AC 230 volts 6 Amps ,1 module complete all as specified and directed.

S&F modular fan regulator, 2 Module 4 step upto 180 W heavy duty 230 volts complete all as specified and as directed.

S&F modular cover plate 1 module including screws and washers etc complete all as specified and as directed.

S&F modular cover plate 2 module including screws and washers etc complete all as specified and as directed.

S&F modular cover plate 3 module including screws and washers etc complete all as specified and as directed.

S&F modular cover plate 4 module including screws and washers etc complete all as specified and as directed.

S&F modular cover plate 6 module including screws and washers etc complete all as specified and as directed.

S&F modular cover plate 8 module including screws and washers etc complete all as specified and as directed.

S&F modular cover plate 12 module including screws and washers etc complete all as specified and as directed.

S & F Metal flush box 1/2 module complete all as specified and directed.

All as per item No 137.00 here-in-before but 3 module

All as per item No 137.00 but 4 module

All as per item No 137.00 but 6 module

All as per item No 137.00 but 8 module

All as per item No 137.00 but 12 module

S & F sheet metal enclosure MCCB DB TPN 4 Way vertical type 250 A Copper Busbar for each phase Fully insulated busbar & shrouded Neutral bars with provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing Reversible Door for IP 43 IK-09 DB's system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. Make: Legrand cat No- 5077 45 or Schneider M-09 or C&S

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SP & N, double door type, 240 Volt complete all as specifed and directed. Note : MCBs will be Measured separately

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN, 63 Amps current carrying capacity to be fixed in the DB complete with connection, testing and commissioning, complete all as specified and directed.

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB), SPN, 40 Amps current carrying capacity to be fixed in the DB complete with connection, testing and commissioning, complete all as specified and directed.

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB), SP, 6-32 Amps current carrying capacity to be fixed in the DB complete with connection, testing and commissioning, complete all as specified and directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 20 watt min 100 LM/watt, natural white(4000K)/ cool white (6500k), with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed.

Supply and fixing LED bulk head luminaires,9 watts (600-900 lumens) lamp with fittings, connecting cable PVC insulated and PVC sheathed copper flxible cable of size 16/ 0.20 mm with necessary fixing arrangments complete all as directed.

S & F LED Mirror light fitting 2 ft tubelight, 10 watt aluminum housing and integrated electronic driver complete with fixing arrangements on wall complete all as specified and directed.

Supply & fix in replacement of LED Security Light Luminaire 35 watt with 2500 or more lumen warm white/cool day ligh with, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole/wall fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint complete all as specified and directed.

S&F in repairs LED Bulb 230V AC 12 watt warm/cool day light 6500K as per the direction/requirement of site complete all as specified and directed.

S&F decorative wall light fitting made up of Polycarbonate ,Cylindrical shape or as per the sample required/obtained from the site and mounting arrangement to fix the lamp and all as directed by Engr-in-Charge with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.

Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store ccomplete all as specified and directed.

M & L for Hanging only ceiling fan/exhaust fan and connecting up including provision of flexible cable from ceiling rose or connector to fan Including hook and clamps with nut ,bolts, washers etc complete all as specified and directed

M & L for painting of ceilling fan/exhaust fan of any make/model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting , complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all as spedified and directed.

Taking down of electric meter of any type and any capacity and refixing of the same on an old location with complete connections all as specified by Engr in charge

Taking down of geyser of any type and any capacity and refixing of the same on an old location with complete fittings such as cold and hot water connection pipes and accessories all as specified by Engr in charge

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer with suitable glass vision panel of each meters shall be provided in the door to easy meters reading and provide all electrical connections with minimum dimensions (90 x 75 x 25 cm ) flush to wall for incorporating 01 No TPN DB, 02 Nos electronic meters including dander notice board etc, complete all as specified and as directed.

Supply and Fixing MCCB, four pole, 100 Amp, 415 Volt, of breaking capacity 16 KA complete all as directed.

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm graded crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical including taking out the old one complete all as directed by Engineer-in-charge and testing for required value complete. Note:- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

Taking up or down 25mm bore steel tubing in trench/ wall with connection including cleaning for removal all as specified and directed

M&L for 25mm bore GI tubing medium grade with all fittings laid in trenches/wall for bore of pipe of following sizes completed all as specified and directed.

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.

M& L for cutting existing GI pipe for alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge.

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable/pipe complete with all accessories all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete with all accessories all as specified and directed by Engineer-in-charge.

Removing excavated materials n.exc 50m and depositing were directed at a level n.exc. 1.5m above the starting level

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I)

M & L for fly ash bricks Sub-class 'B' locally available laid flat in trenches over sand cushioning for cable protection complete all as speciffied and directed.

Supply and fixing 40 mm dia GI tubing medium grade ISI marked fixing to pole with suitable clamps / laid under floor/road for protection of cable including complete all as specified and directed.

Disconnecting & taking out defective under ground LT cable from trenches, pole, pipe, floor ,wall etc including bricks ,GI pipes and removing from work site of unserviceable material of any size complete as directed (Excavation/earth work shall be measured & paid separately under relevant item of this schedule)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete all as specified and as directed.

Material and labour for horizontal boring across the existing road without disturbing the road surface for inserting 40 mm bore GI pipe, complete all as specified and as directed.

Schedule of credit amount of Rs 92343.00 to be deducted during AOC.

Please Enable Macros to View BoQ information