Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.3 LAccepted-AOC | 1 | Accepted-AOC As per PTC Committee. | |
| 2 | 1₹9.6 LAccepted-AOC 28 135 SHRI DWARIKA DHISH ROAD KANPUR NAGAR UTTAR PRADESH 208001 | KANPUR NAGAR | UTTAR PRADESH | 208001 | 1 | Accepted-AOC As per PTC Committee. | |
| 3 | 2Rejected-Finance | 2 | Rejected-Finance On administrative ground. | |
| 4 | Rejected-Technical | - | Rejected-Technical Not Qualified as per PQC |
Tender Value
₹28.6 L
EMD Value
₹55,000
Closing Date
16 Feb 2025, 6:00 pmClosed
Superintending Engineer, EMCC-VII, 2x660MW JTPP
Office of the Superintending Engineer, EMCC-VII, 2X660MW JTPP, Malawan, Etah.
Supply of fasteners, gaskets, glands, jointing sheets and miscellaneous consumables for 2X660 MW, JTPP Malawan, Etah
2025_RVUNL_1000274_1
ET-02/PD-I/EMCC-VII/JTPP/2025
Open Tender
Miscellaneous
Fixed-rate
90 days
Office of the Superintending Engineer, EMCC-VII
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,180
Dy. CAO, CFA and BO, JTPP, Malawan
₹55,000
20 Aug 2025
31 Jan 2025
17 Feb 2025
31 Jan 2025
16 Feb 2025
31 Jan 2025
Holdite (Pidilite make Black Liquid Sealant) in pack of 500gm
Molykote P-37 Ultra pure antisieze, pack: 1KG
Rustolene WD-40 (Rust remover spray), in pack of 420mL
Teflon tape M-seal PTFE thread seal teflon tape, size: 8m x 12mm x 0.08mm
Anabond 666 (RTV Silicon Sealant) 200gm pack
M-Seal (100gm pack)
Loctite 660 – 50mL pack
Selastic 732 silicon compound, cylindrical tin of 300gm
Sodium silicate (Liquid glass)
Fire fighting hose 63mm Fire fighting hoses (Red rubber) conforming to IS:638/1998W (Size- 63mm standard, length 30mtr) with instantaneous male & female end connection – 202 SS coupling (IS:903)
Fire Hydrant Nozzle suitable for 63mm pipe.
Flexible hose pipe – 5 layer heavy duty Size – 1” length 50mtr
Water spray nozzle – Brass material Size – 1”
Loctite 242, 50ML per pack
Loctite 5920 (300ML pack)
Cap Screw with nut & washer M12X25 Gr. 10.9
Cap Screw with nut & washer M12X30 Gr. 10.9
Cap Screw with nut & washer M12X35 Gr. 10.9
Cap Screw with nut & washer M12X40 Gr. 10.9
Cap Screw with nut & washer M12X50 Gr. 10.9
Cap Screw with nut & washer M20X40 Gr. 10.9
Cap Screw with nut & washer M24X60 Gr. 10.9
Hex Bolt Half threaded with nut & washer M12X45 Gr. 10.9
Hex Head Bolt with nut & washer M16X60 Gr. 8.8
Cap Screw with nut & washer M24X120 Gr. 10.9
Hex Head Bolt with nut & washer M16X50 Gr. 8.8
Hex Head Bolt with nut & washer M20X80 Gr. 8.8
Hex Screw with nut & washer M16X35 Gr. 10.9
Hex Screw with nut & washer M10X30 Gr. 10.9
Hex Screw with nut & washer M12X20 Gr. 10.9
Hex Screw with nut & washer M12X50 Gr. 10.9
Hex Screw with nut & washer M16X30 Gr. 10.9
Hex Screw with nut & washer M16X40 Gr. 10.9
Hex Screw with nut & washer M16X60 Gr. 10.9
Hex Screw with nut & washer M20X40 Gr. 10.9
Hex Screw with nut & washer M20X60 Gr. 10.9
Hex Screw with nut & washer M24X60 Gr. 10.9
Hex Screw with nut & washer M24X80 Gr. 10.9
Hex Screw with nut & washer M30X80 Gr. 10.9
Hex Screw with nut & washer M42X150 Gr. 10.9
Hex Screw with nut & washer M8X16 Gr. 10.9
Hex Screw with nut & washer M8X30 Gr. 10.9
Cap Screw with nut & washer M16X30 Gr. 10.9, ISO-4762
Cap Screw with nut & washer M20X120 Gr. 10.9, ISO-4762
Cap Screw with nut & washer M20X65 Gr. 10.9, ISO-4762
Cap Screw with nut & washer M36X120 Gr. 10.9, ISO-4762
Cap Screw with nut & washer M36X300 Gr. 10.9, ISO-4762
Cap Screw with nut & washer M8X40 Gr. 10.9, ISO-4762
CSK Screw with nut & washer M16X35
CSK Screw with nut & washer M5X12
Hex bolt with nut & washer M16X110 Gr. 10.9, ISO-4762
Hex bolt with nut & washer M16X90 Gr. 10.9, ISO-4762
Hex bolt with nut & washer M20X240 Gr. 10.9, ISO-4762
Hex bolt with nut & washer M20X300 Gr. 10.9, ISO-4762
Hex bolt with nut & washer M24X280 Gr. 10.9, ISO-4762
Hex bolt with nut & washer M30X180 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M12X35 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M12X80 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M16X20 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M16X55 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M30X60 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M30X90 Gr. 10.9, ISO-4762
Hex Screw with nut & washer M42X120 Gr. 10.9, ISO-4762
Schnorr – Washer S10
Schnorr – Washer S12
Schnorr – Washer S16
Schnorr – Washer S20
Schnorr – Washer S24
Schnorr – Washer S30
Set Screw with nut & washer M20X2X100 Ri
Set Screw with nut & washer M24X100 Ri
Set Screw with nut & washer M24X2X120 Ri
Set Screw with nut & washer M36X3X160 Ri
Set Screw with nut & washer M8X25 Ri
Castable Refractory mortar data sheet (50kg pack)
Asbestos powder
Asbestos cloth 3mm
10X3 PTFE Flex-O-Seal CUJG-W14 Gasket 10X3 (Champion PTFE Flex-O-Seal CUJG-W14, size - 10X3.00mm)
10X5 PTFE Flex-O-Seal CUJG-W14 Gasket 10X5 (Champion PTFE Flex-O-Seal CUJG-W14, size - 10X5.00mm)
Anbond GP Silicone Sealant (General purpose Acetoxy grade) 260ml per pack
Gland packing 12mm Graphite N/M
Gland packing 30mm Graphite N/M
Gland rope 08mm Asbestos braided
Gland rope 10mm Asbestos braided
Gland rope 12mm Asbestos braided
Jointing sheet size 1.0mm Jointing sheet – size 2000X1500X1.0mm (Champion style 20, compressed asbestos fiber jointing sheet, non-metallic confirming to IS-2712 grade W/3)
Jointing sheet size 2.0mm Jointing sheet – size 2000X1500X2.0mm (Champion style 20, compressed asbestos fiber jointing sheet, non-metallic confirming to IS-2712 grade W/3)
Jointing sheet size 3.0mm Jointing sheet – size 2000X1500X3.0mm (Champion style 20, compressed asbestos fiber jointing sheet, non-metallic confirming to IS-2712 grade W/3)
Loctite 275 (50ml pack)
Molykote – Longterm 2 Plug
OKS 110 Micro-refined MoS2 powder, temp range – 185 to 450 degree (750gm pack)
O-Ring kit for Fans & Mills O-Ring assortment set, 5C metric standard series NBR-70, Nitrile rubber construction from ID 3mm X OD 7mm to ID 44mm X OD 52mm. Suitable for minimum 100 bar pressure.
M24X50mm LG – Hexagonal bolt (Full thread) with washer, hot dip galvanized, confirming to IS-1363 of grade C Class 4.6
M24X180mm LG – Hexagonal bolt (Full thread) with washer, hot dip galvanized, confirming to IS-1363 of grade C Class 4.6
½” BSW X 2-1/2” LG – Hexagonal bolt with washer & nut, hot dip galvanized, confirming to IS-1363 of grade C Class 4.6
¾”-10 UNC X 35mm LG – Hexagonal bolt (Full thread) with washer, hot dip galvanized, confirming to IS-1363 of grade C Class 4.6
¾” BSW X 2-1/2” LG – Hexagonal bolt with washer & nut, hot dip galvanized, confirming to IS-1363 of grade C Class 4.6
¾” BSW X 3-1/2” LG – Hexagonal bolt with washer & nut, hot dip galvanized, confirming to IS-1363 of grade C Class 4.6
¾” BSW X 4” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
5/8” BSW X 2” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
5/8” BSW X 3” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
5/8” BSW X 4” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
7/8”-9 UNC X 40mm LG – Hexagonal bolt (Full Thread) with washer, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
7/8” BSW X 3” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
7/8” BSW X 3-1/2” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
7/8” BSW X 4-1/2” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
1” BSW X 3” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
1” BSW X 4” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
1” BSW X 5” LG – Hexagonal bolt with washer & nut, hot dip galvanized, Confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 1” BSW X 10” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 1-1/8” BSW X 11” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 1-1/8” BSW X 14” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts ¾” BSW X 3” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts ¾” BSW X 8” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 5/8” BSW X 13” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 5/8” BSW X 18” LG – 4” LG thread on both sides, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 5/8” BSW X 26” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 7/8” BSW X 7-1/2” LG, confirming to IS-1363 of grade C Class 4.6
Stud with washer & nuts 7/8” BSW X 9” LG, confirming to IS-1363 of grade C Class 4.6
Viton_Rubber cord_1.5mm Viton/FKM Rubber cord: #Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness 1.5mm
Viton_Rubber cord 2mm Viton/FKM Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness 2mm
Viton_Rubber cord_2.5mm Viton/FKM Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness 2.5mm
Viton_Rubber cord 3mm Viton/FKM Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness #size: 3mm X 5mtr of each cord
Viton_Rubber cord_3.5mm Viton/FKM Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness 3.5mm
Viton_Rubber cord 4mm Viton/FKM Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness 4mm
Viton rubber cord dia 5mm Shore Hardness:80 Viton/FKM Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 180%, max temp -+200degree centigrade of following thickness 5mm X 2mtr of each cord.
Neoprene rubber cord O section dia 3mm Neoprene Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 300%, max temp -+120degree centigrade, Compression set- 16%, color- Black of following thickness 3mm.
Neoprene rubber cord O section dia 4mm Neoprene Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 300%, max temp -+120degree centigrade, Compression set- 16%, color- Black of following thickness 4mm.
Neoprene rubber cord O section dia 5mm Neoprene Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 300%, max temp -+120degree centigrade, Compression set- 16%, color- Black of following thickness 5mm.
Neoprene rubber cord O section dia 6mm Neoprene Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 300%, max temp -+120degree centigrade, Compression set- 16%, color- Black of following thickness 6mm.
Neoprene rubber cord 7mm Neoprene Rubber cord: Hardness (Shore A)-70+/-5, Circular cross-section, elongation at break- 300%, max temp -+120degree centigrade, Compression set- 16%, color- Black of following thickness 7mm.
Viton_Rubber sheet Size 1200X2mm Viton Rubber Sheet of following thickness #Hardness 70+/-5 shore A, density- 1.9kg/m3, black, Size: 2.00mm thickness, width 1200mm
Viton_Rubber sheet Size 1200X3mm Viton Rubber Sheet of following thickness #Hardness 70+/-5 shore A, density- 1.9kg/m3, black, Size: 3.00mm thickness, width 1200mm
Neoprene Rubber sheet thick 2mm Neoprene Rubber Sheet , #Hardness 70+/-5 shore A, density- 1.40kg/m3, black, Size: 2.00mm thickness, width 1200mm. Length- 2000mm
Neoprene Rubber sheet thickness 3mm Neoprene Rubber Sheet , #Hardness 70+/-5 shore A, density- 1.40kg/m3, black, Size: 3.00mm thickness, width 1200mm. Length- 2000mm
Neoprene Rubber sheet thickness 3mm Neoprene Rubber Sheet , #Hardness 70+/-5 shore A, density- 1.40kg/m3, black, Size: 4.00mm thickness, width 1200mm. Length- 2000mm
Neoprene Rubber sheet 1x2mtr thick 5mm Neoprene Rubber Sheet , #Hardness 70+/-5 shore A, density- 1.40kg/m3, black, Size: 5.00mm thickness, width 1200mm. Length- 2000mm
SS Shim size 0.02mm SS Shim Gr. AISI-316 of following sizes: thickness 0.02mm, width 300mm or more.
SS Shim IS:6911/AISI-316- 0.03mm SS Shim Gr. AISI-316 of following sizes: thickness 0.03mm, width 300mm or more.
Shim size 0.05mm SS Shim Gr. AISI-316 of following sizes: thickness 0.05mm, width 300mm or more.
SS Shims 0.5x15mtr, 0.1mm thick SS Shim Gr. AISI-316 of following sizes: thickness 0.1mm, width 500mm & length 15000mm. Size: 15000x500x0.1
SS Shim Gr AISI 316 0.15mmX300mm SS Shim Gr. AISI-316 of following sizes: thickness 0.15mm, width 300mm or more.
SS Shim size 0.20mm SS Shim Gr. AISI-316 of following sizes: thickness 0.20mm, width 500mm or more.
SS Shim Gr. AISI-316 0.25mmX300mm SS Shim Gr. AISI-316 of following sizes: thickness 0.25mm, width 300mm or more.
SS Shim 0.3mm SS Shim Gr. AISI-316 of following sizes: thickness 0.3mm, width 500mm & length 15000mm. Size: 15000mmX500mmX0.3mm
SS Shim Gr. AISI-316 0.40mmX300mm SS Shim Gr. AISI-316 of following sizes: thickness 0.4mm, width 300mm or more.
Shim size 0.50mm SS Shim Gr. AISI-316 of following sizes: thickness 0.5mm, width 500mm or more.
SS 304 Shims 0.5x15mtr, 1.0mm thick SS Shim Gr. AISI-316 of following sizes: thickness 1.0mm, width 500mm & length 15000mm. Size: 15000x500x1.0mm
SS Shim type SS316, thickness 2mm SS Shim Gr. AISI-316 of following sizes: thickness 2.0mm, width 500mm or more.
SS Shim type SS316, thickness 3mm SS Shim Gr. AISI-316 of following sizes: thickness 3.0mm, width 500mm or more.
Hex bolt M6x25mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M6x25mm
Bolt HT, M6x40mm Full Threaded HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M6x40mm
HT HH Bolt M8x25 Gr. 8.8 HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M8x25mm
HT Hex Bolt nut M8x50 HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M8x50mm
Bolt HT, M10x40mm Full Threaded HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M10x40mm
HT Bolt F/T with nut washer M10x60mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M10x60mm
Bolt M12x40mm with nut & washer HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M12x40mm
HT M12x50mm Bolt with nut HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M12x50mm
HT Bolt nut FT 8.8 M12x70mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M12x70mm
Hex Bolt with nut HT M12x100 HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M12x100mm
Bolt Hex HT 8.8 M16x50mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M16x50mm
Hex HD Bolt washer M16x70mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M16x70mm
HT Hex Head Full threaded, M16x100mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M16x100mm
HT HH Bolt with nut & washer M20x70 HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M20x70mm
HT Hex Bolt & nut M20x90mm FTH HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M20x90mm
Hex HED Bolt M24x80mm nut washer HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M24x80mm
Hex head bolt M24x110mm HT bolt full threaded with nut Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes: M24x110mm
Spring lock washer Square end M6 Spring lock washer with square end. #Material steel: Spring steel, suitable for following sizes fasteners, Size: M6
Spring lock washer Square end M8 Spring lock washer with square end. #Material steel: Spring steel, suitable for following sizes fasteners, Size: M8
Spring lock washer Square end M10 Spring lock washer with square end. #Material steel: Spring steel, suitable for following sizes fasteners, Size: M10
Spring lock washer Square end M12 Spring lock washer with square end. #Material steel: Spring steel, suitable for following sizes fasteners, Size: M12
Spring lock washer Square end M16 Spring lock washer with square end. #Material steel: Spring steel, suitable for following sizes fasteners, Size: M16
Allen Bolt M6x50mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M6x50mm
Hex Soc Cap screw FT 8.8 M8x50mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M8x50mm
Bolt Allen HT M10x40mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M10x40mm
Hex Soc Cap screw FT 8.8 M10x50mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M10x50mm
Hex Soc Cap screw FT 8.8 M10x65mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M10x65mm
Allen Bolt M12x40mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M12x40mm
Bolt Allen nut HT M12x50mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M12x50mm
Hex Soc Cap screw FT 8.8 M12x70mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M12x70mm
Allen Bolt M16x50mm Hexagon socket head cap screw full threaded Gr. 8.8 (Make: LPS/TVS/Unbrako) of following sizes, M16x50mm
MS Hex nut bolt 4.6 M8x25mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M8x25mm
MS Hex nut bolt 4.6 M8x50mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M8x50mm
MS Bolt M10x40mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M8x25mm (in 1kg boxes)
MS Bolt with nut M10x50mm F/T MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M10x50mm
MS Hex nut bolt 4.6 M10x60mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M10x60mm
MS bolt with nut M12x40mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M12x40mm
MS bolt nut & washer M12x50mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M12x50mm
Hex MS bolt with nut & washer M12x60mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M12x50mm
Hex MS Bolt with nut washer M12x100mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M12x100mm
Hex MS Bolt with washer M16x80mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M16x80mm
Hex MS Bolt with nut washer M16x120mm MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M16x120mm
MS Bolt with nut M20x100mm F/T MS Black hexagonal nut/bolt Gr. 4.6 of following sizes, M20x100mm
Cotton Jute
Graphite Powder
HEX HD BOLT WASHER M16X50 MM
Hex Bolt M16x60
HEX BOLT M8X30MM
HEX HD BOLT WITH NUT & WASHER M16X40 MM
HEX HD BOLT NUT WASHER M 10X80 MM
HEX HD BOLT WASHER M 16X110 MM
HEX MS BOLT WITH NUT WASHER M 16X100 MM
HEX MS BOLT WITHWASHER M 16X80 MM
HT BOLT WITH NUT & WASHER M 20X60 MM
HEX HD BOLT WASHER M 20X200 MM
STUD M22X130
M/S KAMAL ENGINERING WORKS (BID ID -4950299)
SHAHJAHAN ENGINEERING WORKS (BID ID -4914978)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .