REPAIR AND REPLACEMENT OF BER FURNITURE AGAINST VARIOUS MD ACCN OF OFFRS, JCO AND OR UNDER GE(WEST) FEROZEPUR CANTT

Amount

Table Computer (FD/E6/MAP/03) Supply & fixing of following components/parts of Table computer in replacement of unsv top made out of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood beading all round the top of Table computer including dismantling of unsv components all as specified shown on drg.(FD/E6/MAP/03) , Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 1 here-in-before but replacement of unsv side wall of table computer, rest all as per Drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 1 here in before here-in-before but replacement of unsv bottom of table computer, rest all as per Drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 1 here in before here-in-before but replacement of unsv drawers with 2 Nos Telescopic channel including CP handle of table computer, rest all as per Drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 1 here in before but Telescopic Channel 1 mm thick for Key board tray of Table computer , rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 1 here in before but Key board Tray of Table computer , rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 1 here in before but legs with nylone Buffer of Table computer , rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

TV Trolly (FD/E6/MAP/ 04 (R) Supply & fixing in replacement of unsv top/bottom made out of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood all round the Top/Bottom of TV Trolly including dismantling of unsv components all as specified shown on drg.(FD/E6/MAP/4 (R) , Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 8 here-in-before but replacement of unsv side wall, rest all as per Drg and complete all as specified and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 8 here-in-before but replacement of unsv rear wall, rest all as per Drg and complete all as specified and as directed by Engineer-in-Charge.

All as per item No.8 here in before but replacement of broken 5.5mm thick black colour glass with 02 Nos Stainaless steel Hinges fitting, 02 Nos magnatice catcher and brass handle. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 8 here-in-before but replacement CP Handle complete as per drawing and complete all as specified and as directed by Engineer-in-Charge.

Replacement of nylon coaster wheels of TV Trolly as shown on drg, complete all as specified and as directed by Engineer-in-Charge.

Table dressing ladies (FD/MAP-II/07) :- Supply & fixing of the following components/parts of table dressing ladies including dismantling unserviceable components all as specified and shown on drg.(FD/MAP-II/07) replacement of unserviceable looking mirror 5mm thick alongwith frame including one coat fench polish on the frame all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing of the following components/parts of table dressing ladies including dismantling. Replacement of unsv top/bottom made out of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood all round the Top/Bottom of Table dressing ladies including dismantling of unsv components all as specified shown on drg.(FD/MAP-II/07) , Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per item No.15 here in before but replacement of unsv centre Top including teak wood supporting Stiffner of Table dressing ladies , Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per item No.15 here in before but replacement of unsv Back portion of Table dressing ladies , Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per item No.15 here in before but replacement of unsv side portion (inner/outer) of Table dressing ladies , Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per item No.15 here in before but replacement of unsv drawer with 02 Nos telescopic channel, 01 Nos CP Handle and supporting stiffner of Table dressing ladies , Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per item No.15 here in before but replacement of front shutter with 02 Nos SS hinges, 01 Nos CP handal and 01 Nos magnatic catcher. Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 15 here-in-before but Front /side wall part with 02 Nos stainless steel corner plate of dressing stool of table dressing ladies. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 15 here-in-before but top portion dressing stool including all round 25mm Teak wood runner. Top should be 12mm thick plywood, (Make- Novapan, century, Action Tessa). Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 15 here-in-before but bottom portion dressing stool. Bottom should be 12 mm thick plywood Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 15 here-in-before but back portion dressing stool. Back should be 12 mm thick plywood, Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 15 here-in-before but heavy duty revolving nylon double wheels best quality. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 15 here-in-before but Foam cushion 75 mm thick 40 density covered with tapestry cloth on including stiching complete. Rate of tepestry cloth should be not less than Rs. 110/- per meter. Quality will be approved by Engr-in- Charge / GE.

Sofa Set 5 Seater (FD-234) Supply & fixing of following components/parts of Sofa Set 5 Seater using 1st class seasoned hard wood Sheesham free from all knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed by Engr-in-Charge.(FD-234). S&F new Legs of Sofa Set 5 Seater including one coat polish of the same part, Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 27 here in before but new front rail , rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 27 here in before but new Side rail, rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 27 here in before but new steel spring binding with rope properly, Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 27 here in before but new 12mm thick ISI marked BWR commercial Plywood at bottom potion, rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 27 here in before but new Stiffener, Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 27 here-in-before but S&F new tapestry cloth with stiching/fitting of 5 Seater Sofa set complete. Rate of tepestry cloth should be not less than Rs. 130/- per meter and cloth will be not less than 11 RM per 5 Seater Sofa Set. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 27 here-in-before but new Hassan cloth of Sofa Set 5 Seater complete. Rate of tepestry cloth should be not less than Rs. 70/- per meter and cloth will be not less than 08 RM per 5 Seater Sofa Set. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 27 here-in-before but S&F new Foam cushion of Sofa set 5 Seater will be 25mm thick 40 density. Make of foam Sleep well/Kurlon foam/Feather foam. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Chair Computer (FD/E6/MAP/01) Supply & fixing as in replacement of unserviceable seat & back of chair computer. Foam cushion of chair computer will be 75mm thick 40 density covered with tapestry cloth of approved quality. Rate of Tapestry cloth will be not less than Rs.150/- meter. Make of foam Sleep well/Kurlon foam/Feather foam. 12mm thick Ply wood will be BWR grade ISI marked. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 36 here in before but new armrest of Chair computer, made of black integral skin polyurethane reinforced. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 36 here in before but new Gas lift Mechanism best quality with 100mm stroke length and Gas pressure 300n force of chair computer. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 36 here in before but new pedestal Assy of size 700mm with 05 Nos of nylon twin coaster wheels of Chair Computer. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 36 here in before but new twin wheel nylon coaster wheels of chair computer as shown on drg, and complete all as specified and as directed by Engineer-in-Charge.

Chair Writing MAP (FD/E6/MAP/12) Supply & fixing as in replacement of unserviceable seat & back of chair writing MAP. Foam cushion of chair computer will be 75mm thick 40 density covered with tapestry cloth of approved quality. Rate of Tapestry cloth will be not less than Rs.150/- meter. Ply wood will be BWR grade ISI marked. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of armrest made of black integral skin polyurethane reinforced of Chair Writing in replacement of unsv armrest. Rest all as shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of Powder coated MS Tubular frame made out of 25mmx10mm of Chair Writing in replacement of unsv MS Tubular frame. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Bin Linen Multipurpose (FD/E6/MAP/09) Supply & fixing of the following components/parts of Bin Linen Multipurpose including dismantling of unserviceable components all as specified and shown in drawings.(FD/E6/MAP/09). Taking down UNSV the top/ Bottom and S&F new Top/Bottom of Bin Linen Multipurpose, made of 18/19 mm thick prelaminated particle board (Make- Novapan, wintuff, Action Tessa) of teak shade including 4 mm thick Teak wood beading all round the top with one coat french polish on beading complete. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 44 here in before but shutter both side left & right made of prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 44 here in before but Side portion made of 18mm thick prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 44 here in before but drawer of Bin linen multipurpose with CP handle. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 44 here in before but back ply wood 12 mm thick BWR grade. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 44 here in before but Hardwood stiffner all round of the bottom portion. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 44 here in before but CP Handle of drawer. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

M& L for french polish to Bin Linen Multipurpose portion exposed to direct vision of wooden component/parts, complete all as specified and as directed by Engineer-in-Charge.

Table Bed Side (FD-276) Supply & fixing of the following components/parts of Table Bed Side (FD-276) including dismantling of unserviceable components all as specified and shown in drawings.(FD-276). Taking down UNSV the top and S&F new Top of Table Bed Side, made of 18/19 mm thick prelaminated particle board (Make- Novapan, wintuff, Action Tessa) of teak shade including 4 mm thick Teak wood beading all round the top with one coat french polish on beading complete. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 52 here in before but side portion of Table Bed Side made of prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 52 here in before but shelf/middle portion of Table Bed Side, made of 18mm thick prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 52 here in before but back ply wood 06 mm thick BWR grade ISI Marked. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

M& L for French polish to table Bed side portion exposed to direct vision of wooden component/parts, complete all as specified and as directed by Engineer-in-Charge.

Chair Wooden Bottom (FD-285) Supply & fixing of following components/parts of chair wooden bottom using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as specified Drg : (FD-285) Replacement of unserviceable front leg all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 57 here in before but new rear leg. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 57 here in before but new front / back seat rail. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 57 here in before but new side seat rail / back leg top stiffner 02 Nos. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 57 here in before but new stiffener 'H' type. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 57 here in before but new Supply and fixing of sheesham wood triangular support with nails to strengthen Chair wooden bottom. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 57 here in before but Supply and fixing of Seat, made of 06mm thick commercial plywood BWR ISI marked. Rest all as per shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Polishing with french polish to chair wooden Bottom, wooden portion exposed to direct vision complete all as specified.

Desk(FD-1021) Supply & fixing of the following components/parts of Desk including dismantling of unserviceable components all as specified and shown in drawings.(FD-1021). Taking down UNSV the top and S&F new Top of Desk, made of 18/19 mm thick prelaminated particle board (Make- Novapan, wintuff, Action Tessa) of teak shade including 4 mm thick Teak wood beading all round the top with one coat french polish on beading complete. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 65 here in before but bottom portion made of 18mm thick prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 65 here in before but Side portion made of 18mm thick prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 65 here in before but Rear portion made of 18mm thick prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Preparing all steel surface before painting and apply one coat of painting to all steel portion of Desk. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Charpoy GI pipe with nylon niwar (FD-220) : Removing of old unsv newar from charpoy GI pipe FD-220 and supply and reweaving with new Plastic newar. Plastic newar shall be of 50 to 55mm wide with white in colour (Made from fresh material not recycled) Ist quality having weight not less than 1.5 Kgs per charpoy and shall be weaven closely and tightly up and down both sides without leaving any space on the long rail and short rail. Rest all as per drg and complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv long rail from existing frame of charpoy of GI pipe FD-220 and Supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked and complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unsv long rail retrieved from charpoy GI pipe against Ser No.71 above after cutting threading of both ends to the requires size and complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv leg from existing frame of charpoy GI pipe and fixing legs by making from unsv short rail retrieved from charpoy GI pipe as per item No 72 above including cutting threading complete and providing best quality PVC shoe to the legs of charpoy GI pipe and complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv elbow three way 32mm bore from existing frame of Charpoy GI pipe FD-220 and Supply and fixing new elbow GI three way32mm bore medium grade ISI marked and complete all as specified and as directed by Engineer-in-Charge. and shown on drawing FD-220.

Removal of unsv check nuts from existing frame of charpoy GI pipe & Supply and fixing new check nuts GI 32mm bore medium grade ISI marked and complete all as specified and as directed by Engineer-in-Charge and shown on drawing FD-220.

Tightening of charpoy GI frame complete all as per drawing.

Welding of FMN clamps to the legs of charpoy GI pipe all as per drawing

Almirah Med 1/2 H X 1/2 S FD-65 (M) :- Supply & fixing of the following components/parts of Almirah med 1/2 H x 1/2 S including dismantling of unserviceable components all as specified and shown in drawings.(FD-65 (M)). Taking down UNSV Shutter and S&F new Shutter with 3 Nos 75mm long SS ISI marked hinges, made of 25 mm thick block board with one side teak veneer finish. Teak wood beading shall be use all round the shutter. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 78 here in before but Side portion made of 25 mm thick block board with one side teak veneer finish and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 78 here in before but Hardwood stiffner all round of the bottom portion and complete all as specified and as directed by Engineer-in-Charge.

Taking down UNSV hasp and staple from Almirah Med 1/2 H X 1/2 S FD-65 (M) and S&F new 300mm long SS sliding door bolt on the shutter . Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 78 here in before but back ply wood 12 mm thick BWR grade ISI Marked. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 78 here in before but shelve of almirah Med 1/2 H x 1/2 S , made of 12mm thick well seasoned 2nd class hard wood along with one coat french polish. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Takiing down UNSV hinges from Almirah Med 1/2 H X 1/2 S FD-65 (M) and S&F 75mm long ISI marked SS new hinges with screw on the shutter . Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Almirah Med with shelves FD-65 (M) :- Supply & fixing of the following components/parts of Almirah med with shelves including dismantling of unserviceable components all as specified and shown in drawings.(FD-65 (M)). Taking down UNSV Shutter and S&F new Shutter with 3 Nos 75mm long SS ISI marked hinges. Shutter made of 25 mm thick block board with one side teak veneer finish. 4mm thick Teak wood beading shall be use all round the shutter. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 85 here in before but Side portion made of 25 mm thick block board with one side teak veneer finish . Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 85 here in before but Hardwood stiffner all round of the bottom portion. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Taking down UNSV hasp and staple from Almirah Med with shelves, FD-65 (M) and S&F new 300mm long SS sliding door bolt on the shutter . Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 85 here in before but back ply wood 12 mm thick BWR grade ISI Marked. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 85 here in before but shelve of almirah Med , made of 12mm thick well seasoned 2nd class hard wood along with one coat french polish. Rest all shown on drg and complete all as specified and as directed by Engineer-in-Charge.

CHAIR DINING OFFICER (FD/MAP-II/04) Supply and fixing in replacement of unserviceable Front leg of Chair Dining Officer using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish including dismantling of unsv components/parts complete all as specified and shown on drg and complete all as specified and as directed by Engineer-in-Charge.

All as per Ser item No. 91 here-in-before but Rear leg

All as per Ser item No. 91 here-in-before but side rail.

All as per Ser item No. 91 here-in-before but Front/back rail.

All as per Ser item No. 91 here-in-before but stiffener 'H' type.

All as per Ser item No. 91 here-in-before but S&F tapestry cloth on seat cushion (Rate of cloth will be not less 120/- RM), quality and colour approved by Engr-in- Charge / GE.

All as per Ser item No. 91 here-in-before but S& F of Foam cushion 75 mm thick and 32 density on seat (Rate of cloth will be not less 80/- Sqrft), quality approved by Engr-in- Charge / GE.

Taking out UNSV ply of seat and Supply and fix new 12mm thick commercial ply of seat of chair dining Officer cushioned. Rest all as per Drg and complete all as specified and as directed by Engineer-in-Charge.

Supply and fix of sheesham wood triangular support with nails to strengthen Chair dinning cushioned.

CUSHION & COVER FOR SOFA SET (FD/MAP-II/02, FD-281, FD-373) Supply & fixing inreplacement of unsv foam cushion of sofa set of 4/5 seated and couch CB 550x525x100mm 40 density covered with tapestry cloth of approved quality. Rate of Taestry clothe will be not less than Rs.120/- meter. (FD/MAP-II/02, FD-281, 373)

Supply & fixing in replacement of unsv cover of foam cushion suitable for 550x525x 100mm thick cushion. Tapestry cloth of approved quality. Rate of Taestry clothe will be not less than Rs.120/- meter. FD-281, 373 & DB-4084, 3973

Charpoy GI pipe ply Top : Removing of old unsv ply top from charpoy GI pipe FD-220 and Supply and fixing new 12 mm thick plywood BWR grade ISI Marked of size 6'6" x 3' with 75 mm long x 6 mm dia full threaded nut and bolts with washer in bothside by drilling 2 Nos of hole in long rail and 2 Nos of hole on short rails. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv iron strip from long rail of charpoy of GI pipe ply wood 9FD-220) Supply and fixing new iron strip to be welded with long rail of charpoy GI pipe FD-220 of size 900x30x5 mm thick duly black painted in 2 Nos on long rails below ply wood top complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv long rail from existing frame of charpoy of GI pipe FD-220 and Supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked all as specified and shown on drg and complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unsv long rail retrieved from charpoy GI pipe against Ser No.50 above after cutting threading of both ends to the requires size and complete all as specified and as directed by Engineer-in-Charge and shown on drawing.

Removal of unsv leg from existing frame of charpoy GI pipe and fixing legs by making from unsv short rail retrieved from charpoy GI pipe as per item No 51 here-in-before including cutting threading complete and providing best quality PVC shoe to the legs of charpoy GI pipe and complete all as specified and as directed by Engineer-in-Charge.

Removal of unsv elbow three way 32mm bore from existing frame of Charpoy GI pipe FD-220 and Supply and fixing new elbow GI three way32mm bore medium grade ISI marked and complete all as specified and as directed by Engineer-in-Charge. and shown on drawing FD-220.

Removal of unsv check nuts from existing frame of charpoy GI pipe & Supply and fixing new check nuts GI 32mm bore medium grade ISI marked and complete all as specified and as directed by Engineer-in-Charge and shown on drawing FD-220.

Tightening of charpoy GI frame complete all as per drawing.

Welding of FMN clamps and iron strip of charpoy GI pipe all as per drawing

POLISHING TO WOODEN FURNITURE Material and labour to French polish for wooden surface of Hat Stand with mirror articles where-ever applicable as per drg including cleaning and preparing the surface with one or more coat all as specified and directed.FD-23(M)

All as per Ser item No. 111 above but on Chair dining. FD-279/MAP

All as per Ser item No. 111 above but on Chair easy.FD-229

All as per Ser item No. 111 above but on Almirah Med 1/2 H X 1/2 S (FD-65(M))

All as per Ser item No. 111 above but on Table dining 4/6/8 persons. (FD/MAP-II/04, FD-30, 239,273)

All as per Ser item No. 111 above but on Table 900mmx600mm with /without drawer.FD-42(M)

All as per Ser item No. 111 above but on Bed Plywood.

All as per Ser item No. 111 above but on Book Case.

All as per Ser item No. 111 above but on side board.

All as per Ser item No. 111 above but on Sofa set 5/4 seated

All as per Ser item No. 111 above but on Table dressing ladies

All as per Ser item No. 111 above but on Table dressing gents/MAP

All as per Ser item No. 111 above but on Table peg FD-384

All as per Ser item No. 111 above but on Teapoy. FD-382

All as per Ser item No. 111 above but on Table centre. FD-274

All as per Ser item No. 111 above but on Almirah Med with shelves (FD-65(M))

All as per Ser itemNo. 111 above but on Chair writing. FD-280

All as per Ser item No. 111 above but on Table writing/med. FD-33(M)

All as per Ser item No. 111 above but on Table office clk.

All as per Ser item No. 111 above but on Chair Dining Officer.

All as per Ser item No. 111 above but on Table Bed side MAP

Taking out UNSV Nylon buffer from furniture parts and Supply and fix new 20mm Nylon buffer with SS screw of furniture. Rest all as per Drg and complete all as specified and as directed by Engineer-in-Charge.

Bed Side Locker steel (FD-1029)

Table 900x600x760mm w/o drawer (FD-284)

Table 900x600x760mm with drawer (FD-283)

Table office clk steel (FD-1004)

M/s Manoj Construction Co.

M/S CHAWLA CONSTRUCTION COMPANY

shivam builders