Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC THEERTHAM NADUVILEMURI PADANILAM POST NOORANAD ALAPPUZHA DIST KERALA 690529 | ALAPPUZHA | KERALA | 690529 | L1 | Accepted-AOC Lowest quoted amount overall reasonable | |
| 2 | L2₹30.8 L+₹48,995 (1.61%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest hence rejected | |
| 3 | L3₹31.8 L+₹1.5 L (4.93%)Rejected-AOC H NO 831 1 HINDU NAGAR TILAKWADI BELGAUM 590006 | BELGAUM | BELGAUM | KARNATAKA | 590006 | L3 | Rejected-AOC 3rd lowest hence rejected | |
| 4 | L4₹33.6 L+₹3.3 L (10.9%)Rejected-AOC | L4 | Rejected-AOC 4th lowest hence rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
25 May 2023, 6:00 pmClosed
Garrison Engineer Belgaum
Garrison Engineer Belgaum,Laxmi Tek, Camp, Belgaum
REPAIRS, REPLACEMENT, MAINTENACE OF MAIN WATER SUPPLY PIPE LINES, INSTALLATIONS AND CONNECTED WORKS OF CI,DI,GI PIPES AT LAXMITEK AREA, MILITARY HOSPITAL, RMS AND MES KEY PERSONNEL QTRS UNDER GE BELGAUM
2023_MES_591850_1
8927/E8
Open Tender
Civil Works
Item Rate
300 days
Belgaum
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Belgaum
₹80,000
Yes
15 Jun 2023
28 Apr 2023
27 May 2023
28 Apr 2023
25 May 2023
11 May 2023
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying of DI/GI/CI pipes etc, and getting out in any type of soil complete all as specified and as directed.
Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Removing excavated materrial/ surplus soil not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point. complete all as specified and as directed.
Taking down existing damaged unserviceable CI pipes of 200 mm dia with fittings from the site and taken as credit complete all as specified and as directed. Note :Earth work and excavation will be measured and paid seperately under relevent items mentioned below .
Taking down existing damaged unserviceable CI pipes of 150 mm dia with fittings from the site and taken as credit complete all as specified and as directed. Note :Earth work and excavation will be measured and paid seperately under relevent items mentioned below .
Taking down existing damaged unserviceable CI pipes of 100 mm dia with fittings from the site and taken as credit complete all as specified and as directed. Note :Earth work and excavation will be measured and paid seperately under relevent items mentioned below .
Taking down existing damaged unserviceable CI pipes of 80 mm dia with fittings from the site and taken as credit complete all as specified and as directed. Note :Earth work and excavation will be measured and paid seperately under relevent items mentioned below .
Supply and fix in repairs 200 mm bore dia of Centrifugally cast(Spun) Ductile Iron Pressure pipes with socket & spigot end including all fittings ,class K-7 conforming to IS: 8329/2000 marked with and including Rubber Gaskets used with Push -on -jointing confirming to IS 5382 in any length laid in trenches complete all as specified and as directed . Note:(i) DI /CI specials such as Tee, reducer etc including joints and jointing materials will be measured and paid seperately under relevant items of this schedule. (ii) Make of DI Pipe : Jindal Ltd , Gujarat /Electro steel castings Ltd , WB / Tata Metaliks , Kolkata /M/S Jai Balaji Industries Ltd , New Delhi .
All as description in item No 08 here in before but 150 mm bore
All as description in item No 08 here in before but 100 mm bore
All as description in item No 08 here in before but 80 mm bore
Taking up or down existing old unserviceable GI tubing and connections of 100 bore dia of pipe and taken as credit complete all as specified and as directed :-
All as description in item No 12 here in before but 80 mm bore
All as description in item No 12 here in before but 50 mm bore
All as description in item No 12 here in before but 40 mm bore
All as description in item No 12 here in before but 25 mm bore
All as description in item No 12 here in before but 20 mm bore
Supply, fixing, lay and jointing in repair Galvanised iron water tubes 'medium grade' of size 100 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:--(i) Earth work if any shall be measured and paid seperately under relevant items of this BOQ..(ii)Make of GI Pipe:TATA/JINDAL/PRAKASH SURYA
Description all as per item No.18 here in before but of 80 mm bore dia
Description all as per item No.18 here in before but of 50 mm bore dia
Description all as per item No.18 here in before but of 40 mm bore dia
Description all as per item No.18 here in before but of 25 mm bore dia
Description all as per item No.18 here in before but of 20 mm bore dia
Supply, lay and testing 63 mm bore 3 layered PPR Polyproppylene random copolymer pipes ,PN 16 SDR 7.4 stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain and threaded Polyproppylene random fittings like elbow,socket,Tee, flange etc laid in trenches complete all as specified and as directed.Make of PPR Pipe : SFMC/ Vectus/KPT Piping system Private Limited
Description All as per item no 24 here in before but of 50 mm outer dia of pipe
Description All as per item no 24 here in before but of 32 mm outer dia of pipe
Description All as per item no 24 here in before but of 25 mm outer dia of pipe
Suplly and fix Un plasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches or fixed on walls, ceilings or in floors of size 50 mm bore complete all as specified and as directed.Note : Make of UPVC Pipe : Finolex/Supreme. Note:-- Earth work if any shall be measured and paid seperately under relevant items of this schedule..
Description all as per item No.28 here in before but of 40 mm bore dia
Description all as per item No.28 here in before but of 25 mm bore dia
Description all as per item No.28 here in before but of 20 mm bore dia
Taking up cast iron water main pipe of 80 mm bore with spigot and socket ends and lead joints with all fittings from trenches carefully without any damage including burning out joints and recover lead and taken as credit complete all as specified and as directed .
Description all as per item No.32 here in before but of 100 mm bore dia
Description all as per item No.32 here in before but of 150 mm bore dia
Description all as per item No.32 here in before but of 200 mm bore dia
Supply, fix, jointing and testing in repair of Cast iron pipe of size 80 mm dia bore with both flanged ends centrifugally cast class LA in any length laid in trenches complete all as specified and directed. Note:-- (i)Earth work if any shall be measured and paid seperately under relevant items of this schedule.(ii) Make of CI Pipe :Electro-Steel/Kesoram/NECO
Description all as per item No.36 here in before but of 100 mm bore dia
Description all as per item No.36 here in before but of 150 mm bore dia
Description all as per item No.36 here in before but of 200 mm bore dia
Supply and Fix in repair Sluice valve of 80 mm dia cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with rising spindle of solid forged bronze and operating handle, with rubber gaskets, MS nuts, bolts, washers and packing materials etc., as required and testing ncluding taking down old unserviceable Sluice valve of any description and taken as credit complete all as specified and as directed .Note : Make "Kirloskar/Leader/L&T/Kartar
Description all as per item No.40 here in before but of 100 mm bore dia
Description all as per item No.40 here in before but of 150 mm bore dia
Description all as per item No.40 here in before but of 200 mm bore dia
Supply and fix in repair Gun metal gate valve of size 50 mm dia bore with iron wheel head, screwed both ends for iron pipe with necessary GI fittings including taking down/up old unserviceable gate/ globe valve of any type and testing complete all as specified and as directed . Note : Make of gun metal gate valve :Leder/Kartar/sant
Description all as per item No.44 here in before but of 40 mm bore dia
Description all as per item No.44 here in before but of 25 mm bore dia
Description all as per item No.40 here in before but of 20 mm bore dia
Description all as per item No.44 here in before but of 15 mm bore dia
Supply and fix in repair CI fitting in repair, like cast iron/DI bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collers, caps and plug upto 150 mm bore for spigot and socket end pipes complete all as specified and as directed.Note :Make of CI Fittings:Make of CI Pipe :Electro-Steel/Kesoram/NECO
Supply and fix in repair CI fitting in repair, like cast iron/DI bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collers, caps and plug etc from size 200 mm bore to 400 mm bore for spigot and socket end pipes complete all as specified and directed.Note :Make of CI Fittings:Make of CI Pipe :Electro-Steel/Kesoram/NECO
Material and labour for Construction of Brick masonry Valve Chamber of size 1200x1200x1200 mm (Internal dimensions) with 100mm thick PCC 1:4:8 type D2 using 40mm graded aggregate for foundation, 230 mm thick brick masonry wall built in CM 1:6, 75mm average thick x 230mm width coping in PCC 1:2:4 type B1 using 20mm graded stone aggregate, 15mm thick rendering in CM 1:4 to internal walls, floors and upto150mm depth below GL to external walls, including provision of 2mm thick MS sheet cover fixed to MS angle iron frame made out of 40 x 40 x 4 mm thick angle iron with necessary MS flat iron stiffeners of size 40mm x 4mm including two coats of synthetic enamel painting over one coat of red oxide primer to all steel surfaces and provision of locking arrangements including necessary excavation and earth work in any type of soil including demolition of existing valve chamber of any description and serviceable items taken as credit complete all as specified and as directed.
Description all as per item no :51 here in before but valve chamber of internal dimension 900mmx900mmx900mm
Supply and fix in repairs of 40 mm dia PTMT ball valves high pressure (minimum weight 690 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. Note : Make of Ball valve : PRAYAG/M/S SHAKTHI INDUSTRIES/WATERTEC
Supply and fix in repairs of 25 mm dia PTMT ball valves high pressure (minimum weight 455 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. Note : Make of Ball valve : PRAYAG/M/S SHAKTHI INDUSTRIES/WATERTEC
Supply and fix in repairs of 20 mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. Note : Make of Ball valve : PRAYAG/M/S SHAKTHI INDUSTRIES/WATERTEC
Supply and fix in repairs of 15 mm dia PTMT ball valves high pressure (minimum weight 142 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. Note : Make of Ball valve : PRAYAG/M/S SHAKTHI INDUSTRIES/WATERTEC
Material and labour for Cutting existing road with width not exceeding 750 mm and 1.0 m deep for laying of water mains and filling back with excavated soil except road portion and road portion filled and make good with Plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary steel form work complete all as specified and as directed.
Material and labour for Servicing of sluice valve cast iron body by greasing/ oiling using T&P as required as per manufacture instructions and providing glands rope of superior quality to stop any leakage of sluice valve including Preparation of old surface of sluice valve and applying one coat of aluminium paint of size 80 mm dia up to 400 mm dia complete all as specified and as directed.
Supply and Fix in repair Butterfly valve of 80 mm dia gear operated having epoxy coated cast iron body, PN 1.6, ISI marked SGI disc with integral seat of nitrle rubber including taking down old unserviceable butterfly valve of any description and taken as credit complete all as specified and as directed .Note : Make "Kirloskar/Normax/AUDCO/Kartar
Description all as per item No.59 here in before but of 100 mm bore dia
Description all as per item No.59 here in before but of 150 mm bore dia
Supply and fix in repair Air release valve of 50 mm bore dia double action with two air outlets ,ISI MARKED including jointing materials such as flanges,nuts ,bolts and washers ,rubber gasket and fixing up in cast iron pipe of any size including taking down old unserviceable Air release valve of any description and taken as credit complete all as specified and as directed .Note : Make "Kirloskar/Normax/AUDCO/Kartar
Description all as per item No.62 here in before but of 40 mm bore dia
Description all as per item No.62 here in before but of 25 mm bore dia
Material and labour for Rectification of leakage of GI pipes of 20 mm upto 100 mm dia laid in trenches/ on floor/ fixing to wall etc. of any size including excavation, earthwork, dewatering and removal of mud or pumping out water etc. by replacing of unserviceable GI fittings like elbow, union, sockets, tees, nipple etc. of appropriate sizes and GI pipes of the existing sizes upto 01 Metre length (ISI MARKED) complete all as specified and as directed Notes:- (a) New GI Pipe more than 01 metre length if required will be measured and paid separately.
Material and labour for Rectification of leakage of CI/DI pipes of 80 mm to 200 mm dia laid in trenches/ on floor etc. including excavation and eartwork, dewatering and removal of mud or pumping out water etc. by replacing of unserviceable CI fittings and CI pipes of the existing size up to 01 metre length or cocking of lead wool in joints or replacing of rubber gaskets etc. (ISI MARKED) complete all as specified and as directed Notes:- (a) CI Fittings, CI Pipes more than 01 metre length and lead joints incorporating with the job will be measured and paid separately.
Supply and fix in repair Cast iron ball type, flanged end foot valve conforming to ISI-5312 (Pressure Ratings PN6) with Synthetic Nitrile Rubber Coated Ball suitable for 100 mm dia bore pipe complete including CI nuts, bolts and gaskets etc, and taking down old unserviceable non-return valve of any description and taken as credit complete all as specified and as directed. Make:-"Kirloskar/Normax/AUDCO/Kartar
Supply and fix in repair Gun Metal Non return Valve of size 25 mm dia screwed for iron pipe including necessary GI fitting complete all as specified and as directed. Make : Leader/Zoloto/Sant
Material and labour for Cutting existing CI pipe of size 80 mm dia bore , laid in position for taking out branch connection by inserting new Tee, branches, collar etc. complete all as specified and as directed
Description all as per item No.69 here in before but of 100 mm bore dia
Description all as per item No.69 here in before but of 150 mm bore dia
Material and labour for Burning out lead joint and taking out spun yarn carefully for the size of pipe 80 mm dia bore and taken as credit
Description all as per item No.72 here in before but of 100 mm bore dia
Description all as per item No.72 here in before but of 150 mm bore dia
Description all as per item No.72 here in before but of 200 mm bore dia
M&L for Burning out lead joint and taking out spun yarn carefully for the size of pipes 80 mm dia bore complete all as specified and as directed.
Description all as per item No.76 here in before but of 100 mm bore dia
Description all as per item No.76 here in before but of 150 mm bore dia
Description all as per item No.76 here in before but of 200 mm bore dia
Material and labour for Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, slice valve pit cover and frame, sheet, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing confirming to Fe 290 E -165 complete all as specified and as directed.
Material and labour for Preparation of new steel surfaces of any description and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M/s.GOODWILL ELECTRICALS
DHAIRYASIL RAMAKANT DESAI
M/s. VIJAY ELECTRICALS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .