GE(S)/M-68/2021-22

Amount

M&L for construction of septic tank 25 users including excavation in any type of Soil, foundation in PCC 1:2:4 over hardcore, brick work in CM 1:4, plastering in CM 1:4, RCC cover slab in M-25 (design mix), RCC manhole cover embedded in angle iron frame, inlet/ outlet pipes, vent pipes etc complete all as specified and shown on Drg No CEPZ/C-TD/013/13 dated 11 Sep 2013 sheet 1/5 to 5/5 .

M&L Soakage wells including excavation in any type of soil , foundation in PCC 1:3:6, including intercepting chamber, screen chamber, brick work in CM 1:4, honey combed/solid as shown in drg, RCC cover slab in M-25(Design mix) , duly filled with brick bats,inlet/ outlet pipes etc of size 2.4 M dia X 4.50M deep complete all as specified and shown on Drg No CEPZ/C-TD/013/13 dated 11 Sep 2013 sheet 1/5 to 5/5 .

Excavation in trenches in any type of soil n exc 1.50 mtr wide and not exc 10 Sqm on plan and not exc.1.5m deep complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick. complete all as specified and directed.

Removing excavated material (soil) not exc. 50 mtr and depositing where directed at a level n. exc. 1.50 mtr above the starting point complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with old size class 'B' bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1 : 4 complete all as specified and directed.

M&L for Rendering 15mm thick in two layers (base layer 10mm thick in CM 1:6 & finishing layer 5mm thick in CM 1:4) using liquid water proofing compound @ 200 ML/ bag of cement on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs (for manholes etc) surface finished even and smooth complete all as specified and directed.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for colum ns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia complete all as specified and directed.

M&L concrete bed to drain pipes for 150 mm bore, laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), complte all as specified and directed

M&L for RCC NP-2 pipe 150 mm bore laid in trenches and jointed in cement mortar (1:1) and tested complete all as specified and directed.

Extra for forming fair finished drain or channel 15 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed.

All as per Srl item No. 14 here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each, complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 kg of cement per sq. metre all as specified.

Dismantling of plain or corrugated asbestos cement sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L rendering 10 mm thick in cement and sand mortar 1:6 on brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas facia or roof projection incl necessary formwork if any incl roughning and removal of loose concrete/ plaster complete all as specified and directed.

Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, RCC slabs on walls, steps; seismic and other similar bands,filling hold fasts and other groovings in walls, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and the like including use of necessary form work and demolition to existing PCC complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coats of white wash on new plastered surface of wall complete all as specified and directed.

Preparation of existing surfaces incl rubbing down and stopping of old/painted surfaces of walls and applying one coat of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Preparation of existing surfaces incl washing, rubbing down and stopping of painted surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement incl making joints at every 2.50 m and at corner, joints filled with bitumen 85/25 and sand in ratio 1:2 by weight including demolition to existing plinth protection complete all as specified and directed.

M & L for 550 x 550 mm size machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed base in cement and sand mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M & L for Machine cut 550x100mm size kota stone slab 15- 16 mm thick over 10 mm thick cement screed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in riser of steps/pillars/skirting/dado including taking down existing plaster on walls complete all as specified.

M&L non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed .

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified.

M & L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F structural steel work Fe-290 (Gde-E-165 ) rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc complete all as specified and directed.

S&F structural steel works as in rolled sections ( Fe-290 Gde E-165)) as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

Cutting holes in brick walls in cement or cement lime mortar n. exc. half brick thick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F 6mm thick Non asbestos fibre cement building boards 1200 x 1200 mm size fixed or laid / inserted to mild steel /timber/ GI/ Aluminium framework with screws in ceiling flat or sloping and applying three coats of white wash all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates of size 105mm X 60mm including necessary fixing lugs, hinges, lock strike plate, etc.including filling of PCC type C0 (1:3:6), complete all as specified and directed.

S&F 40 mm 2nd class hard wood plain framed factory made, panelled shutter (three panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces .The size of rail and stile as per IS :1003 complete all as specified and directed.

S&F 35mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed..

S&F for Box type steel windows /ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg No-CEPZ/TD-354/09 sheet 1/3 to 3/3 welded to FI frame work, including other fittings; hinges, handles, tarred hold fasts, PCC blocks etc complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed.

Preparation of old treated steel surfaces of any description over 10 cm width or girth and painting with one coats of synthetic enamel paint complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and priming with pink primer and painting with two coats of synthetic enamel paint complete all as specified and directed.

M&L 200mm long, mild steel, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

M&L 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to shutter complete all as specified and directed.

M&L pressed Steel handle, oval type, stove enamelled black of size 125mm long ISI marked complete all as specified and directed.

S&F 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.

M&L stainless steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L 16-18mm thick pre polished Udiapur green marble stone slab bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of stone including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed.

Demolition of brickwork/ stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brickwork with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for 75mm thick cement concrete PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in padding rounded or chamfered on edges in any description complete all as specified and directed.

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick , polished, area of each tile not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed .

M&L false ceiling of 12 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong / Everest including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. Note :- Invoice from company’s authorized dealer shall be submitted with material by the contractor along with dealership certificate. Certificate of genuineness from the manufacturer shall also be submitted by the contractor before getting the material passed from the department.

S&F Pressed steel frames for doors with one or more rebates of size 125mm X 60mm including necessary fixing lugs, hinges, lock strike plate, etc.including filling of PCC type C0 (1:3:6), complete, as specified, supplied and fixed

Careful demolition of existing taxi/tarmic PQC Panel by mechanical means or Concrete in ground floors and pavings exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for cleaning the bottom and sides of PQC Panel and providing 300mm thick Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre reinforecd with trangular fibre as per manufacturer instruction ,over Polythene film, black, 50micron laid in floors and sides of surface over 50mm thick clean sand and making joints complete all as specified and directed.( PVC film and sand cushion shall be measured and paid seperately.)

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Polythene film, black, 50micron laid in floors complete all as specified and directed.

M&L for finishing surface of concrete roads, pavements, by belting complete all as specified and directed.

M&L forming 12mm thick expansion joint filled with polyurethane material of approved make filler and top 30mm primed and sealed with sealing compound grade A for 300mm thickness of slab complete all as speecified and directed.

M&L for Removing the demolished material to a distance exc. 2.5 Km but n exc. 3 km beyond the lead included in rate incl loading, unloading and stacking at the destination complete all as specified and directed.

Surface excavation in any type of soil not exc. 30 cm and averaging 15 cm deep and getting out complete all as specified and directed.

Brickwork with sub class ‘B’ (old size) bricks but except Bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

Providing Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in bed of drains including finishing fair and even complete all as specified and as directed by Engineer-in-charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed by Engineer-in-charge.

M & L rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement and sand mortar 1:4 finished even and fair on external wall surfaces with and including WPC as per manufacturer instructions complete all as specified and as directed by Engineer-in-charge.

M&L for mild steel angle iron frame work confirming the grade FE-410 for drain cover frames, handles including necessary cutting, welding, drilling, bolting etc as required complete all as specified.

Brickwork with Fly Ash Bricks (old size), straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified.

S&F TMT bars but 5mm and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beam concrete fair finished surfaces complete all as specified and directed.

Use and waste of formwork to sides of concrete fair finished surfaces of foundations footings bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work verticle or batter complete all as specified and directed.

Use and waste of formwork to sides of pillars, struts columns etc concrete fair finished surfaces complete all as specified and directed.

Use and waste of formwork to soffits of concrete fair finished surfaces of suspended slabs such as roof slab,floor slabs landings and similar works not exc 200 mm thick complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm complete all as specified and directed.

Reinforced cement concrete M-25 design mix (using 20mm graded aggregates) in fdn incl footings, foundation beams, plinth beams, base for columns etc basement slabs and mass concrete complete all as specified and directed.

Reinforced cement concrete M-25 design mix(using 20mm graded aggregates) in Beams,cantilevers, lintel over 1.5m span etc complete all as specified and directed.

Reinforced cement concrete M-25 design mix (using 20mm graded aggregates) in columns etc complete all as specified and directed.

Reinforced cement concrete M-25 design mix(using 20mm graded aggregates) in slabs supported on walls beams, columns etc complete all as specified and directed.

Preparation of new plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coats of Oil emulsion distemper complete all as specified & directed.

Preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

S & F factory made solid panel PVC dor shutter (Wood grain colour sheets on both sides) 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC 'C' Channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour & as gap insert for top rail & bottom rail Panelling of wood grain colour sheet to be fitted in MS frame welded/ sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F Solid PVC door frame of size 75mm x 45mm (suitable for moulded door) made out of 5mm wood grain printed PVC Sheets & edges will be painted to match printed sheet as reinforced with 19mm square MS tube and fixing in opening as specification & drawing complete all as specified and directed.

S & F 35mm thick factory made UV 3D printer flush door wood free consisting 5mm thick solid panel PVC sheet on both side (both side multicolour UV 3D printed) and consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm x 19mm for stiles as well as top, bottom and lock rail. The inside panel shall be consist 18/19mm thick rigid solid PVC board complete as per direction of Engineer-in-charge all as specified and directed. .

M & L for 3 mm Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed to aluminium framed work (venilators) complete all as specified.

S & F for Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.

S & F for 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.

S & F for 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.

S & F for Aluminium handles cast type anodised of size 100mm long ISI marked complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded crushed stone aggregate, including finishing surface of concrete topping even and rough complete all as specified.

M & L for hardcore of broken bricks of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Glazed coloured ceramic tile 450 x 300 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles omplete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 25mm dia ball PVC valve high pressure with polythene float complete all as specified & directed.

S & F for Steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, of 15mm bore complete all as specified and directed by EIC.

S & F for Steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, of 20mm bore complete all as specified and directed by EIC.

S & F for CP Brass fancy type Bib taps chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore complete all as specified and directed.

S&F angle valves, cast copper alloy,fancy type chorium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends fixed with 15 mm bore pipe.

S & F gun metal, gate valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with wheel head/butterfly handle, screwed both ends for iron pipe or for unions.

S&F concealed stop valves 15mm bore (ISI marked) chromium plated long shank and cast copper alloy screwed down, high pressure with crutch or butter fly externally screwed for iron pipe or for union compelete all as specified and directed.

S&F Oval shape counter top, light coloured WHB size 550 x 400mm of make ''Cera'' fixed on granite platform complete with CP brass waste fittings with CP center hole mixer, union, waste pipe, pvc connection, pedestal etc complete as specified and directed.

S & F for Vitreous China Urinal, Half stall type, light coloured including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of spreader, CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.

S&F vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including CI 'P' or 'S' trap provision of lean concrete bedding, connection to drain out pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required all as specified.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed complete all as specified.

S & F for Soap dish, Stainless steel, approximate size 160x 160x90mm complete all as specified and directed.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls for 75 mm bore of pipe fixed incl stack clamps to secure pipe with wall complete all as specified and directed.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls for 100 mm bore of pipe fixed incl stack clamps to secure pipe with wall complete all as specified and directed.

S & F for PVC (SWR) door bend, plain including jointing with solvent cement 75 mm bore complete all as specified.

S & F for PVC (SWR) door bend, plain including jointing with solvent cement 110 mm bore complete all as specified.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 100 mm bore complete all as specified.

S&F PVC (SWR) vent cowl of 75mm dia complete all as specified and directed.

APP modified roof treatment over non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Rendering 10mm thick on fair faces of brick work or concrete sur faces in CM (1:3) ontop of roof slab mixing with and including WPC @ 3% by weight of cement whilest the concrete still green

M&L for rendering 10 mm thick in CM 1:3 on stone masonary surfaces or concrete surfaces ( internal) with and includingh WPC @ 3% by weight of cement, finished fair & even complete all as specified and directed.

Removing excavated material (soil) exc 250m but not exc. 500 mtr and depositing where directed at a level n. exc. 1.50 mtr above the starting point complete all as specified and directed.

M&L for construction of septic tank 10 users including excavation in any type of Soil, foundation in PCC 1:2:4 over hardcore, brick work in CM 1:4, plastering in CM 1:4, RCC cover slab in M-25 (design mix), RCC manhole cover embedded in angle iron frame, inlet/ outlet pipes, vent pipes etc complete all as specified and shown on Drg No CEPZ/C-TD/013/13 dated 11 Sep 2013 sheet 1/5 to 5/5 .

M&L Soakage wells including excavation in any type of soil , foundation in PCC 1:3:6, including intercepting chamber, screen chamber, brick work in CM 1:4, honey combed/solid as shown in drg, RCC cover slab in M-25(Design mix) , duly filled with brick bats,inlet/ outlet pipes etc of size 1.2 M dia X 3.00M deep complete all as specified and shown on Drg No CEPZ/C-TD/013/13 dated 11 Sep 2013 sheet 1/5 to 5/5 .

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete and making good disturbed surfaces of walls, floors to match with existing specifications and keeping aside serviceable items for reuse within the same bldg and removing UNSV items from site, complete all as specified and directed.

M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

Description all as per Srl item No. 70.00 above but for 5 pin 5 Amps socket outlet point on independent board controlled by one switch 5 Amp one way, etc complete all as specified and directed.

Description all as per Srl item No. 70.00 above but for 5 pin 5 Amps socket outlet point on same board controlled by one switch 5 Amp one way, etc complete all as specified and directed.

Description all as per Srl item No. 70.00 above but for one 15Amps independent socket outlet point using 2.5 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) medium duty including sunken steel boxes of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earht wire connecting to earth dolly complete all as specified and directed.

S&F "as in repair" Switch piano flush button, single pole, one way, 5 Amps, 240 Volts with polycarbonate body, complete all as specified and directed.

S&F "as in repair" ceiling rose, surface bakelite, 2 to 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F "as in repair" socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

S&F "as in repair" Socket outlet, 3 Pin, 5 and 15 Amps, multipurpose, 2 in 1, flush type, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F "as in repair" Switch piano flush type, single pole, one way, 15 Amps, 230 Volts with, complete all as specified and directed.

S&F "as in repair" stepped type electric fan regulator 240 volt complete all as specified and directed.

S&F in replacement of ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep,min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor complete all as specified and directed.

S&F in replacement of wall mounted 1 x 20 watt LED 6000K tube light fittings (4 feet long), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

S&F in replacement of bulk head 9/10 W LED 6000K light fitting Bulkhead with premium quality diffuser or glare free light and easy to install snapfit installer incl complete with all accessories connecting electrically to ceiling rose using 2 core PVC insulated over all sheathed flexible copper conductor of size 0.50 sqmm complete all as specified and directed.

S&F in replacement of of building security LED light luminaire 20 W, IP 65 AC 230 volts, made up to pressure di cast iron housing complete making connection with street light/bldg security light box or over head line using PVC insulated and sheathed 2 core multi stranded copper conductor cable of size 0.50 sqmm including suitable size of bracket and light grade pipe for muntaining of fitting complete all as specified and directed.

S&F in replacement of double door 8 way MCB distribution board sheet steel powder coated DBs suitable for MCB of 240 volts, single pole and neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F in replacement of MCB SP 6-20 Amp 240 Volts with rupturing capacity 10 KA complete all as specified and directed.

S&F in replacement of MCB SPN 25-32 Amp 240 Volts with rupturing capacity 10 KA complete all as specified and directed.

M&L for replacement of earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.

S&F in replacement of galvanised iron tubing light grade size 40 mm dia for protection of cables with all fitting and fixed complete to pole or laid in ground complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer complete all as specified in SSR Part-I and directed. Note :- Punned thickness shall only be measured and paid.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 16 Sqmm x 2 core including taking out existing cable from trenches or fixed to wall/pole or passing through ducts or pipe of any size, any core , complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately

S&F "as in repair" for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for Angle/ batten fittings including self ballasted LED retrofit bulb 9 watt with PBT body shell and PC Diffuser. 240 Degree wide distribution available CCT 3000K & 6500 K complete all as specified and directed.

M&L in replacement of submain wiring with two single core PVC insulated flexible copper conductor cable of size 6.0 Sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead, drawn in and including concealed non metallic rigid PVC conduit, medium grade and making good the disturbed surfaces to match with existing specifications, including taking down exisating sub main wiring complete all as specified and directed. Note :- Two run of cable with one run of earth wire and PVC conduit shall be measured and paid for as one unit.

Taking down ceiling fan/exhaust fan by disconnecting from ceiling rose. Dismantling blades & cleaning by replacement of capacitor, safety pin, cap, nuts & bolts etc, appplication of one coat of synthetic enamel paint by spray painting & rewriting number and re-fixing the blades and ceiling fan in the same position after including minor repairs and making electic connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning complete all as specified and directed

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 10 Sqmm x 2 core complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

S&F in replacement Recessed LED ceiling 40 Watt, luminaire of size 600mm x 600mm with white light window and built-in LED lamp with all accessories and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable and testing after fixing, complete all as specified and directed.

M/S DUGGAL CONSTRUCTION CO

M/S NARESH KUMAR SHARMA

Bidder Name

Mahajan Enterprises

M/S DUGGAL CONSTRUCTION CO

M/S NARESH KUMAR SHARMA