Special Repair of ADC Residence at Rewari in Rewari District.

Amount

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled (a) doors (HSR 8.18 (a))

(b) Windows

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick without concrete base (HSR 8.26)

Dismantling brick or flagged stone slab flooring without concrete base (HSR 8.28)

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

First class brickwork laid in cement sand mortar 1:6 in first storey upto 4 meters above plinth level. (HSR 11.7)

Cement concrete 1:2:4 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64)

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 (HSR 14.9)

Providing & fixing vitrified tiles of size 600 x 600mm of approved made in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tiles shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, & RAK. (HSR 14.89) (Note: double charged tiles shall be used)

Providing and fixing vitrified tiles of size 600x600mm of approved make in skirting / dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK(Note: double charged tiles shall be used) (HSR 14.90)

Providing and fixing ceramic-tiles / anti-skid tiles of size 400x400mm or above size of approved make in floors laid in any pattern over base of 20 mm thick Cement Sand Mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles. [HSR 14.91] Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK.

Providing and fixing 1st quality ceramic-glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (a) Size of ceramic Giazed tiles 200mm x 300mm. [HSR 14.92 (a)]

Providing and fixing Granite stone in all shades 15 mm to 18 mm thick in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone. (HSR 14.96)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - (a) door and window frame of size 89 mm X 50 mm with 40 mm wide single rebate (HSR 18.34 (a))

(d) door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate

(c) door and window frame size 127 mm X 50 mm with 40 mm wide double rebate

Factory manufactured solid flush door shutters, with block board core as per I.S.No.16591969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressesd, conforming to I.S.2202 part I and II, fixed in position, including iron hinges,screws, chocks/cleats and stops etc.(excluding the cost of any fittings other than specified above,but including labour for fixing the same in position)- (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges.) [HSR 17.93 (a) (iii)] - Note 17.18

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other teak,conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140G or 120G designation including cost of iron hinges, screws,chocks/cleats,stops nail etc.,complete fixed in position (excluding the cost of any fitings,other than specified above,but including labour for fixing the same in position) - (style and rails of windows shutter shall be 75 mm wide). [HSR 17.92 ii] - Note 17.18

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ,chikrassy and chaplash,etc.,(non-coniferous timber other than teak,conforming to I.S.specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges,screws,chocks/cleats,stops,nails etc., complete,fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position). (HSR 17.90 (b)) - Note 17.18

Providing and fixing sliding bolt with nuts and screws,etc.,complete (b) aluminium (i) size 300 mm X 16 mm (HSR 17.83 (b) (i)]

Providing and fixing commercial type block board, plain lining, butt jointed, including wooden plugs (teak) placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra). (HSR 17.49 (b))

Providing and fixing, helical door spring 150 mm (superior quality),including necessary screws, complete (b) iron (HSR 17.79 (b))

Supplying and fixing hydraulic door closer, I.S.I.mark, with necessary screws, etc., complete (c) I.S.I. designation No.III (size of door 851 mm to 1000 mm ) (HSR 17.82 C)

Providing and fixing 65 mm X 35 mm special quality brass cup-board locks, six levers, of reputed firms such as Godrej or equivalent, including necessary screws, etc., complete (HSR 17.85)

Providing and fixing 0.50 mm thick aluminium sheet,including cost of necessary screws,etc., complete (HSR 17.87)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1)

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc. (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (HSR 16.25)

Spirit two polishing two coats including 2 coats of wood filler on new work. (HSR 16.44)

Providing two coats of exterior acrylic emulsion paint (b) Ist Quality. (HSR 16.79 b)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) (HSR 16.81)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above. (i) White (HSR 30.6 (i))

Providing and fixing in position best Indian make Lavatory Suites (with full anti -splash rim in viterous chinaware & all other necessary fitting, White, 610mm x 510mm with one No. tap (HSR 30.42 (iii)

Providing and fixing in position best Indian make Pedestal fittings of citreous chinaware complete (as required by the Engineer-in-charge) (White) (HSR 30.44 (i))

Recovery Items:- i) The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, door & window shutters have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specifications) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under :- i) Doors @ 300 /- Each

ii) Window @ 200 /- Each

Narender Kumar Contractor

sahil

priti construction

Parveen Contractor

R.S Enterprises

Varun Sharma