Addn/Altn To Subroto Block Aircrew Cafeteria and certain minor works at AFA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and disposing of rubbish materials off the premises complete all as directed

Demolition of brickwork or stone/boulder masonry/PCC block masonry built in cement mortar including all quoins, arches, pillars, etc. and disposing of marerial complete all as directed

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed

M & L for PCC 1:3:6, type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc., complete all as specified and directed.

M&L for pre-cast cement concrete block masonry of ( 1:3:6) Type C1 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 surface finished even and smooth without using extra cement all as specified and directed.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacturers instructions finished fair and even complete all as specified. Note : (WPC shall be measured and paid separately).

Supply only of liquid waterproofing compound ISI marked

M&L for Hardcore with broken stone or boulders of gauge n exc. 63 mm, with broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L 100 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub floors, sub bases etc including necessary form work complete all as specified and directed.

M&L for cement concrete as in sub floor 25mm thick 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed

M&L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including screed bed in CM (1:6) 15 mm thick on floors complete all as specified and as directed.

M & L for glazed ceramic coloured tiles of size 450 x300x 7mm thick, in vertical surfaces of dados, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering / screed 10mm thick in cement mortar 1 : 4 on fair faces of brick or concrete surfaces rough finished to receive of wall tiling etc complete all as specified and as directed..

Supply and fix false ceiling work with Armstrong Ceiling Classic Lite 600x600x16mm, NRC-0.55, grid size m/t 32x24mm, cross Tee of 1200mm of size 27x24 mm and cross Tee of 600mm of size 25x24 mm and wall angle of size 19x19mm and fixed all around the wall to form a grid of size 600x600. Tiles shall be inserted in the formed grid and suspended with 2mm GI wire at every 1200mm intervals Centre to Centre all as specified and directed

S&F rolled mild steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe- 410-W (Gde E-250) quality 'A' all as specified and directed

S&F of structural steel work as in main and cross beams, hip and jack raffers, purlins where connected to common raffers, vertical posts etc. fixed with angle cleats or other connecting plates, cleats etc using ERW or induction butt welded tubes conforming to IS-1161-1998Gde- St-240 or with hollow structural steel sections conforming to IS: 4929-1997 Gde St-240 complete all as specified and as directed

S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M&L for Preparation of new Steel and Iron surfaces Surfaces of any description, over 10cm in width or girth,not otherwise described and painting with two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Powder coated aluminium frame / tracks for shelves / cup boards, doors and windows etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note : Minimum thickness of powder coating shall be 50 microns

M&L for Powder coated aluminium windows, ventilators, cupboard / shelve shutters etc, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium fittings such as rollers, locking handles etc all as specified and directed Note : Minimum thickness of powder coating shall be 50 microns

M&L for Prelaminated particle board 12mm thick, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and direted

M&L for 18mm thick plywood of grade (BWP), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and as directed

M & L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive complete all as specified.

S&F for Brass handles, cast type, polished bright 150 mm long complete all as specified and directed

S & F of 20 mm outer dia CPVC pipes SDR 11 with necessary plain CPVC SDR 11 fittings in walls/ceilings or laying in floors complete all as specified and directed

S & F of 25 mm outer dia CPVC pipes SDR 11 with necessary plain CPVC SDR 11 fittings in walls/ceilings or laying in floors complete all as specified and directed

S&F of high density pipe 40 mm dia (HDPE) pressure rating 6 Kg / Sqcm fixed to wall and floors etc complete all as specified and as directed.

S&F CP Bib taps 15 mm cast copper alloy fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F 15 mm bore stop valves / angle cock concealed type cast copper alloy fancy type CP screwed down high pressure screwed both ends for iron pipe or for unions, complete all as specified and direted.

S&F Gun metal globe or gate valves of 25mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and direted

S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement etc complete all as specified and direted

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm all as directed

S&F 110 mm dia PVC (SWR) pipes type 'B' single socketed, in any length laid in trenches or in floors, walls, ceiling etc all as specified and direted

S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 4 mm thick plain sheet glass, ordinary quality and glazing in aluminium frames in each pane not exceeding 0.5sqm with neoprene beading complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming coat complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge/ thickness including roof coverings all as directed

Dismantling wrought iron or MS work of any description in any position all as directed

Taking down cement plaster from walls built in cement mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. to receive plaster and removing rubbish off the premises complete all as directed.

Taking down chowkats or frames with shutters exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkats or frames with shutters n exc 1.5 sq. m (without taking off shutters from the frame) complete all as specified and directed

Taking up or down steel tubing and connections upto 25mm bore including cleaning for refixing or removal to store all as directed

Dismantling cast iron/ PVC drain or vent pipe of any description in any position including bends, branch pieces etc all as directed.

M&L for cement concrete (1:2:4) type B1, (using 20 mm graded stone aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed

All as per item No 49 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed

S&F GI tubing 15 mm bore medium grade, galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F GI tubing 20 mm bore medium grade, galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs 15 mm Gun-metal, globe or gate valves, , with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm all as directed

M & L for PVC (SWR) pipes type 'B' 75mm dia single socketed in any length laid in trenches or in floor., walls, ceiling etc all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) vent cowl all as directed

M&L for precast cement concrete solid building blocks or slabs (half brick thick) not exc 10cm thick (1:3:6) type C1 (with plain or interlocking joints as directed) in walls, setting in cement mortar (1:4) complete all as directed

M&L for Making good under cills or over arches, lintels and bressummer incl all pinning when necessary in CM (1:4) all as directed

S &F of Aluminium anodized powder coated door shutter aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips rubber neoprene packing handles 2 nos in each door hinges anodised aluminum snap beading screws etc complete all as specified

S&F of 5.5mm thick plain sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified and directed

S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm incl taking down existing sinks complete all as specified and as directed.

S&F in repairs CP Angular Stop Cock with Wall Flange fancy type, 15mm bore all as specified and directed

S&F in repairs fancy type chromium plated bib taps cast copper alloy fixed to iron pipe or for brass ferrule for 15mm bore pipes complete all as specified.

M&L for joint free coloured non skid ceramic tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.

Removing excavated soil to a distance exc. 1.50 KM but n exc 5 KM and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L 100 mm thick plain Cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors, finishing concrete surfaces to a fair & even surfaces without using extra cement complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed.

S&Fin repairs Aluminium, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as specified and directed

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of 150 mm long length of cover plate all as specified and directed

M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M&L for preparation of old plastered external wall surfaces by complete removal of existing treatment by washing , rubbing down with wire brushes and stopping of any paintings surfaces by smoothing and applying two coats of cement based paint over a coat of alkali resistant primer complete all as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) 75mm thick as in floor sub base etc all as specified and directed.

M&L for pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness M-35 grade with grey cement and pigment,laid over and including sand cushioning of 50mm thick (Avge) and sealing the edges complete all as spicified and directed by Engr in-Charge.

M&L for rendering 10 mm in CM (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for returning filling in, including spreading, levelling, watering and well ramming in layers with excavated earth n exc 25 cm thick all as directed

M&L for preparing old wall surfaces and applying one coat of oil emulsion distemper all as specified and directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M&L for preparing old wall surfaces and applying one coat of cement based paint all as specified and directed.

Supply and install hi wall split units indoor/outdoor of Inverter type with copper condenser complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2.00 TR all as specified and directed Make -Blue Star, Carrier, Voltas, OGeneral, Hitachi

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specifed and as directed.

M&L for Sub Main wiring with two runs of 6sq mm 1100 V grade (nominal area) single core FRLS PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge. Note:-(i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate. (ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (iii) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint.

M&L motor starter 16 Amp 2 module including necessary metal box and cover plate complete all as specified and directed

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed.

S&F of rigid non-metallic PVC conduit 25mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for split AC water drain complete all as specified and directed.

Taking down carefully unserviceable point wiring of light points, fan, socket out let on TV battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, etc and making good the disturbed portion of walls/floors ceiling etc complete all as specified and directed

Taking down carefully light fitting any type size and make after disconnecting electric connection and making good the disturbed portion of wall/floor ceiling etc complete all as specified and directed

M & L for Point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable FRLS with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVC conduit of suitable size but not less than 20mm dia. and all accessories fixed to be consealed in wall & surface of the roof etc., including MS box made out of 1.2mm thickness with 3mm thick laminated sheet for fixing switches, fan regulators, socket outlets etc complete all as specified and as directed for the following:- (a) One light point/ Ceiling or Exhaust or Wall Fan point controlled by one switch

(b) One three pin socket - 5 Amps on independent board

All as per ser item No 89 above but with 2.5sqmm multistranded copper conductor with 2.5 sqmm multistranded copper earth continuity conductor in and including PVC caping and casing or PVC conduit (not less than 20mm) complete all as specified and directed for 15A socket

S&F switch piano type flush type one way , 5A, 240Volts complete all as specified and directed

S&F switch socket combination 2 in 1, 3pin, 5 and 15 Amp flush type universal complete all as specified and directed

S&F of ceiling rose, three terminal, PVC/polycarbonate, insulated body, ISI marked complete all as specfied and directed.

S&F surface mounting/ wall mounted LED tube light fitting 1x20/18watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable with suitable size complete all specified and directed Make : Havells/Phillips/Bajaj/CG/Luker

S&F 1x40W high efficiency 2'x2' recess mounting LED light fitting with glare free homogeneous illumination including LED driver with all accessories internally pre-wired, connecting up with three core twisted flexible copper conductor cable complete all as specified an directed by Engr-in-charge. Make : Havells/Phillips/Bajaj/CG/Luker

S&F exhaust fan with louvers metal body 300mm sweep, 1400RPM, Heavy duty single phase 240 Volts, AC 50 Hz and connecting up including provision of cable 3 core of size 0.5 sqmm (16/0.2mm) from ceiling rose to fan including, making necessary opening on stone/brick masonry wall making good to match existing surfacss complete all as specified and directed

S&F Switch socket combination polycorbonate white 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed.

S&F LED light fitting 1x20 W 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F of MCB DB SPN 4 way with copper bus bar & neutral link double door type fixed on the wall including connections and making good the disturbed surface of wall to perfectly match with the exsting wall complete all as specified and as directed.

S&F MCB SPN 6 to 32A, 10KA rupturing capacity complete all as specified and as directed.

S&F Fix MCB SP 6 to 32 A 10 KA rupturing capacity complete all as specified and as directed.

S&F of wall mounted fan 400 mm sweep , 230 V with inbuilt speed regulator,with coordless remote complete all as specifed and directed by Engineer-in-Charge.

M&L point wiring (surface type) for(Light/Fan/bell) using 1.5 sqmm nominal cross sectional area copper conductor mutimultistranded ,PVC insulated unsheathed , FRLS cables in and including PVC casing and caping and fittings, including 1.2mm thick pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. for one light/fan point cntrolled by one number one way switch complete all as specified and directed.

Deepika Enterprises

Dwarka Pershad Radhey Ramanlal