Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC 86 MAHEWA EAST NAINI PRAYAGRAJ U P | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹48.9 L+₹98,469.50 (2.06%)Rejected-Finance 23 47 25D BHAGABARI ROAD ALLAHPUR ALLAHABAD UP | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹48.9 L+₹1.0 L (2.09%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
PETTY REPAIRS ARMAN COMPLAINTS IN ZONE A AREA AT OLD CANTT ALLAHABAD.
2022_MES_535306_1
8572/E8
Open Tender
Civil Works
Item Rate
270 days
Allahabad
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹90,000
Yes
28 Sept 2022
2 Jul 2022
6 Aug 2022
2 Jul 2022
4 Aug 2022
21 Jul 2022
2 Jul 2022 - 9 Jul 2022
60 days
Amount
Demolition of concrete of any description and in any position not otherwise secifically provided for as in sunken floor etc. complete all as specified and directed.
Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate), as in coping, coving, roof padding, padding in sunken slab using water proofing compound, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Plain cement concrete type F-2, 1:7:12 (using 40mm graded stone aggregate), as in mass concrete in sunken floors., complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Brickwork with sub class 'B' (old size), straight or curved on plan exceeding 6metre mean radius, built in CM 1:6, complete all as specified and directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.
Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Rendering 15mm thick in CM 1:4, mixed with water proofing compound, on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound, complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of primer, complete all as specifed and directed.
Preparation of new plastered or unplastered surfaces of walls and applying two coats of acrylic emulsion paint, complete all as specifed and directed.
High density ployethene (HDPE) pipes of pressure rating 6 kgf/sqcm, 32mm bore, fixed in repair, complete all as specified and directed.
PVC floor trap, plain with grating including jointing with solvent cement, 75mm bore, fixed in repair, complete all as specified and directed.
Salt-glazed stoneware gully traps, 150 x 150mm size, square or round mouthed, type 'P', setting and jointing in CM 1:1, complete all as specified and directed.
PVC (SWR) vent cowl, 110 mm dia, fixed with solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) bends with oval access door, ISI marked of any radius of 110 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) bends, ISI marked of any radius of 75 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) bends with oval access door, ISI marked of any radius of 75 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) bends, ISI marked of any radius of 110 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) 110 mm dia, single T, fixed to PVC pipe joint with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) 110 mm dia, single T, with oval access door fixed to PVC pipe joint with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in floors or trenches, fixed in repairs including necessary earth work, complete all as specified and directed.
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in floors or trenches, fixed in repairs including necessary earth work, complete all as specified and directed.
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.
Toilet Roll Holder fixed to wall, fixed in repair, complete all as specified. Make:- Jaguar, Prayag, Cera
Single Lever Basin Mixer with 450 mm long braided hoses, fixed in repair, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Towel Rack, 600 mm long with lower Hangers, fixed in repairs, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Wall mixer with 115mm long Bend pipe, connecting legs & wall Flange, fixed in repairs, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Towel Rail, 600 mm long, fixed in repair, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed. [Except tubing]
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed. [Except tubing]
Bib taps (fancy type), cast copper alloy, long body chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, fixed in repairs, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Angular cock, fancy type, cast copper alloy, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed 15mm bore, fixed in repairs, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Stop valves, cast copper alloy, fancy type, chromium plated (concealed type), with chromium plated wall flange, screwed down, high pressure, long shank and exposed part kit with fitting sleeve, operating lever concealed part, screwed both ends for iron pipe or for unions and fixed, 15mm bore, fixed in repairs, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
Vitreous China wash hand basin, flat back, size 550mm x 400mm white, excluding waste pipe, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand, with provision of Waste coupling of 32mm dia and pillar tap, 15mm bore, of cast copper alloy, chromium plated, fancy type, fixed in repairs, complete all as specified and directed.
PVC cabinet with mirror of size 400mm x 550mm, fixed to wall with screws, fixed in repair, complete all as specified and directed. Make: Prayag, Commander, Neelkamal, Polytuff, Pearl
Pillar taps cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'HOT' or 'COLD' letter with long screwed shank and fly nuts, screwed for iron pipe 15mm bore pipe, fixed in repair, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
PVC waste pipe of 32 mm dia, flexible for wash hand basin or urinals, fixed in repairs, complete all as specified and directed.
PVC unbreakable (square) wall mounted shelf with 500mm sides, fixed in repairs, complete all as specified and directed. Make: Prayag Cat No BEA - 47A or any other commercially equivalent make as approved by GE.
PVC unbreakable corner shelf (3 piece set), fixed in repairs, complete all as specified and directed. Make: Prayag cat part No BEA-44 A or any other commercially equivalent make as approved by GE.
Swivel shower of chromium plated any colour for fixing with 15mm pipe, complete all as specified and directed.
CP shower arm, 15 mm size, with flange fixed to wall, complete all as specified and dircetd.
PVC tooth brush holder, fixed in repair, complete all as specified and directed. Make: Prayag Cat part No 198 or any other commercially equivalent make as approved by GE.
Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc) with CP mild steel hinging device, fixed in repairs, complete all as specified and directed. Note :- Plastic seat cover shall be measured separately as supply only as considered under respective items.
Supply only Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
European type combination pattern WC, casket type christinna with mounted flushing cistern, PVC connection, seat cover and jointed to sewage pipe, fixed in repair, complete all as specified and directed. Make:- Jaguar, Prayag, Cera
CP Jet for EWC complete set including 1 metre pipe, fixed in repair, complete all as specified and directed .
Plastic water closet seat cover, white, closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices, fixed in repair, complete all as specified and directed.
Viterous china squatting pan, Órissa' pattern, size 580 x 440mm, white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified and directed,
Vitreous china half stall type urinal (back or corner wall type), complete including providing and fxing plugs, bedding urinal against the wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe inclusive of fixing the supply pipe to flushing cistern, trap and waste pipe and coupling, complete all as specified and directed.
PVC flush handle with adjustable lever and hook for low level flushing cistern, fixed in repairs, complete all as specified and directed.
PVC syphon complete for low level flushing cistern, fixed in repairs, complete all as specified and directed.
PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle, jointing with and including provision of 32mm dia 600mm long flush pipe and connections to pipes and fixing of chain and pull, or lever, if any, fixed in repairs, complete all as specified and directed.
Two way angle cock, 15mm size, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes, fixed in repairs, complete all as specified and directed. .Make:- Jaguar, Prayag, Cera
Health faucet of superior quality ABS body, with 15 mm dia 1.25 m long flexible tube and wall hook including fixing, fixed in repair, complete all as specified and as directed. Make:- Jaguar, Prayag, Cera
Waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end, bedded in red lead cement and other end, fixed in repairs, complete all as specified and as directed.
Waste coupling of 40 mm size brass chromium plated for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed, in repairs, complete all as specified and as directed.
PVC connection, 15 mm size, 450 mm long, with PTMT nuts at both end, fixed in repairs, complete all as specified and directed.
Towel rail, CP, 600 mm long, 20 mm dia fixed with steel screw etc, fixed in repairs, complete all as specified and directed.
Stainless soap dish fixed to wall, fixed in repairs, complete all as specified and directed.
Ball valves, 20mm bore, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms), fixed in repairs, complete all as specified and directed.
Cover for HDPE water tank of capacity 500/1000 ltrs, rotating type including frame, including nut bolt, fixed in repairs, complete all as specified and directed. .
Mild steel chromium plated grating (round) 125 mm dia fixed over floor/ nahani trap (with hole/without hole), fixed in repairs, complete all as specified and directed. .
White colour triple layer, 500 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, fixed in repair, complete all as specified and directed.
White colour triple layer, 1000 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, fixed in repair, complete all as specified and directed.
Cleaning of HDPE tank of capacity up to & including 500 Litres by flushing out water, cleaning & removal of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.
Cleaning of HDPE tank of capacity exc 500 Litres but not exc 1000 litres, by flushing out water, cleaning & removal of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.
Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, fixed in repair, complete all as specified and directed.
Stainless steel plate rack / utensils rack of size 600mm x 750mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass scres including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of AGE B/R Old Cantt, fixed in repair, complete all as specified and directed. Make: Prayag Cat Part No P-346 or any other commercially equivalent make as approved by GE.
Stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, including bedding in cement mortar to dwarf wall, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
GI reducers, 15 to 20 mm dia, fixed in repairs, complete all as specified and directed.
GI union, 20 mm bore, fixed in repair, complete all as specified and directed.
GI elbow, 20 mm bore, fixed in repair, complete all as specified and directed.
GI socket, 20 mm bore, fixed in repair, complete all as specified and directed.
GI tee, 15 mm bore, fixed in repair, complete all as specified and directed.
GI elbow, 15 mm bore, fixed in repair, complete all as specified and directed.
GI socket, 15 mm bore, fixed in repair, complete all as specified and directed.
GI union, 15 mm bore, fixed in repair, complete all as specified and directed.
GI nipple, 15 mm bore, 150mm long, fixed in repair, complete all as specified and directed.
GI nipple, 15 mm bore, 100mm long, fixed in repair, complete all as specified and directed.
GI nipple fully threaded with two numbers check nuts and washers for PVC tank with back nut and washers for inlet and outlet pipe, 15mm bore, 100 mm long, fixed in repair, complete all as specified and directed.
GI nipple fully threaded with two numbers check nuts and washers for PVC tank with back nut and washers for inlet and outlet pipe, 20mm bore, 100 mm long, fixed in repair, complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters including removing from site, complete all as specified and directed.
Resecuring or easing & adjusting without taking down door shutter area n exc 1 sqm each, complete all as specified and directed.
Resecuring or easing & adjusting without taking down door shutter area exc. 1 Sqm but n exc 2 Sqm each, complete all as specified and directed.
Taking down shutter of any description exceeding 1 sqm not exceeding 2 sqm each complete all as specified and directed..
Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
PCC 1:3:6 type C-1 (using 20mm crushed stone aggregate) as in fixing of hold fasts with and including provision of necessary form work if required complete all as specified and directed..
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over primed surface, complete all as specified and directed.
Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repair, complete all as specifed and direcetd.
Flush shutters 30 mm thick, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore / M/s Kumar Arch Tech Ltd.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long, fixed in repair, complete all as specified and directed.
Stainless steel hinges with stainless steel hinge pin, 100mm size, complete all as specified and directed.
Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long, fixed in repair, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 100mm long, fixed in repair complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, fixed in repair, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, fixed in repair, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 75mm long, complete all as specified and directed.
Aluminium alloy handles, fabricated type, anodised, 150mm long, complete all as specified and directed.
Aluminium alloy handles, fabricated type, anodised, 150mm long, fixed in repair, complete all as specified and directed.
Aluminium alloy handles, fabricated type, anodised, 100mm long, fixed in repair, complete all as specified and directed.
Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.
Sheet glass, 4.8mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.
Sheet glass, 4.8mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with rubber beading, complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or supporting stand for desert coolers etc., and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame (with and including punching or drilling out old glazing pins/spring clips and providing and fixing new ones) or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
Sheet glass, 4mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.
Figured glass, 4mm thick, pin headed type and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.
Second Class hard wood plain fillets square/ rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails, fixed in repair, complete all as specified and directed.
Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 300mm size, fixed in repairs, complete all as specified and directed.
Mild steel mortice lock, vertical type with two keys etc, 4- lever, 100 mm size, fixed in repair, complete all as specified and directed.
Taking down Aluminium shutters and dismantling stiles & rails including glass panes/particle board carefully, refabricating and refixing in frame position using all old material including replacement of required neoprene packing, cleats, screws with necessary Aluminium angle cleat screws etc. complete all as specified and directed.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repair, complete all as specified and directed.
Floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size, fixed in repair, complete all as specified and directed.
Aluminium die cast body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, , fixed in repair, complete all as specified and directed.
Mild steel peg stay fixed to steel window (as per sample), 250mm size, fixed in repair, complete all as specified and directed.
Mild steel handle for steel window etc, fixed in repair, complete all as specified and directed.
Spot welding in repair for fixing hinges/ handle/ bolts/ helical door spring etc, complete all as specified and directed.
Stainless steel drapery rod cut to size and fixed in position including stainless steel side domes & brackets, 25 mm dia, fixed to wall, fixed in repair, complete all as specified and directed.
Celuka ply, 18mm thick, of single side prelam/ Rigidlam colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets, complete all as specified and directed, Make: Rajshri plastiwood/ SYNTEX or commercially equivalent make in as approved by GE.
Hasp and staple, safety type, aluminium anodised, including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm, complete all as specified and directed.
Door Seal of length equal to width of door fixed to door bottom rail including all fixing arrangement such as screws, nails etc, complete all as specified and directed.
Fabrication & fixing in repairs, of modular kitchen with cabinet/ shelves and wardrobe / cupboard made out of 18mm thick PVC board plain colour and laminated (sheet shall be laminated over PVC board with synthetic adhesive on external face), fixed with piano hinges including making provision for baskets / cutlery basket with handles and door shutters, complete all as specified and directed. NOTE:- PVC sheet, fittings and fixtures shall be measured and paid separately as 'Supply Only' under respective Item No 146 to 158 of this Schedule as 'Supplied only'.
Supply only PVC Celuka ply, 18mm thick, of single side prelam /Rigidlam coloured fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets, complete all as specified and directed, Make: Rajshri plastiwood/ SYNTEX or equivalent in make as approved by GE.
Supply only PVC Celuka ply, 18mm thick, of plain white colour both sides fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets, complete all as specified and directed, Make: Rajshri plastiwood/ SYNTEX or equivalent in make as approved by GE.
Supply only Celuka ply, 12mm thick, of plain white (matt finish) colour both sides fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets, complete all as specified and directed, Make: Rajshri plastiwood/ SYNTEX or equivalent in make as approved by GE.
Supply only 100mm size concealed hinges, stainless steel with SS pin, complete all as specified and directed.
Supply only 75mm size oval shaped stainless steel handles, fancy type, brass polished bright finish, complete all as specified and directed.
Supply only stainless steel basket (plain) of size 50cm x 52.50cm x 10cm made of 4mm thick S.S.wire of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only stainless steel plate basket (11-13 division) of size 50cm x 52.50cm x 16cm made of 4mm thick S.S.wire of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only stainless steel cup and saucer basket of size 50cm x 52.50cm x 20cm made of 4mm thick S.S.wire of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only stainless steel cutlery basket of size 50cm x 52.50cm x 10cm made of 4mm thick S.S.wire and bottom of SS perforated sheet of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only stainless steel bottle pullout of size 50cm x 52.50cm x 16 cm in two tier made of 4mm thick S.S.wire of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only stainless steel glass basket (plain) of size 50cm x 52.50cm x 16 cm made of 4mm thick S.S.wire of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only stainless steel carouser basket (plain) of size 50cm x 52.50cm x 20 cm made of 4mm thick S.S.wire of approved quality with suitable arrangement for fixing Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Supply only Telescope basket (channel) of 18/20 inch length, two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Non - skid jointfree Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450mm x 300mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:3, complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.
Granite, 20mm thick, black work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
Fully casted chrome finish 300mm long bottle trap, 32mm wide with wall flange, complete all as specified and directed.
Peg set of 6 hooks chromium plated, complete all as specified and directed.
Shivagya Engineering
KRISHNA BAHADUR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .