SPECIAL REPAIR/REPLACEMENT OF BER ITEMS AT AF STN HIGHGROUND AND PROVN OF CERTAIN MINOR WORKS AT AF STN HIGHGROUUND, MULLANPUR AND BARWALA UNDER GE (AF) CHANDIGARH

Amount

M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, Complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 12 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth, without using extra cement , complete all as specified and directed.

M&L for Rendering 15 mm thick in two layers 10mm and 5mm thick using water proofing compound on brick or concrete surfaces in cement mortar (1:4) finished with even and smooth Complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound shall be paid and measured separately.

Supply only integral water proofing compound.

Preparation of new plaster surfaces of wall and applying two coats of distemper oil emulsion over chalk whitening prepatory to distemper, complete all as specified and directed

M&L Two coats of cement base paint over a coat of primer including preparation of new plastered or un plastered wall surfaces of any description complete all as specified.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3 to 3/3.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.

S&F Mild steel framed work such as grills, gratings or guard bars etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc conforming to fe 410-0 or fe 310-0 ,complete all as specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery. , complete all as specified and directed.

S&F 125 mm x 60 mm pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete as specified. Note: The sizes/dimensions and type (profile) of frames shall be as shown in IS and thickness of MS sheet 1.25mm thick, complete all as specified and directed .

M&L for PCC 1:2:4 type B0 using 12.50 mm graded crushed stone aggregates as in filling of pressed steel chowkhats, cill, step and for inserting hold fasts etc and similar work , complete, all as specified and directed.

Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3; cutting exceeding half brick but not exceeding one brick complete.

S&L Factory made shutter, 35 mm thick, 2nd class hardwood (Hollock) rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I) and as specified in SSR Part-I section 8 clause 8.24(a), kiln seasoned and chemically pressure treated, complete all as specified.

S&F 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified.

Supply and fixing, 200mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F Mild steel helical door spring, 300 mm ,ordinary rat tail, rod pattern springs including roller and roller plate complete, fixed to chowkhats , complete all as specified and directed

S&F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.

S&F 150mm extruded aluminium alloy handle, fabricated type, anodized, complete all as specified and directed.

S&F Applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces, over 10cm width or girth, including preparation ,complete all as specified and directed..

M&L for Applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces, over 10cm width or girth, including preparation ,complete all as specified and directed..

S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified ,complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20 mm graded stoen aggregate) as in Beams, cantilevers, bressummers,cooking platforms, lintels over 1.5m span

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L TMT steel bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete as in reinforcement to concrete all as specified and as directed.

All as per item no.25 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410W Gde E- 250 Quality A)

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying/taking out of cables and foundation of poles etc. and getting out, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Supply and laying / fixing , GI pipe medium grade 80 mm dia bore for cable protection fixed to pole/wall or laid under floor/roadv /pavement, including flat iron clamp, nut, bolt, wahser etc of required size and taking out old & removal, complete all as specified and directed.

M & L for cutting of Existing CI pipe/flange joint for branch connection suitable for 80mm GI pipe all as specified and direted by engineer in charge

Supply and fix Valve, butterfly conforming to IS 13095,80 mm (3”) dia,all as specified and direted by engineer in charge

Supply and fixng flexible hose 100 mm dia complete all as specified and directed.

Material and labour, Cross arms, bracing, supports, clamps and back plates, fabricated from structural steel section Fe-290 grade E-165 quality including nuts, bolts, washers, and welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of alminium paint over a coat of red oxide primer, complete all as specified and directed.

Point wiring PVC insulated unsheathed multistranded copper conductor FRLS cable using two single core 1.5 Sq.mm (nominal area) in and including 20mm dia metallic in stove enamalled steel conduit concealed including fittings and accessories, one run of continuous single core copper cable of 1.5 Sq. mm connecting to common earth dolly, pressed steel terminal box, provision of 3 mm thick plastic laminated sheet cover for mounting of switches sockets fan regulators etc. & making good to disturbed surface area for the one light/ fan point controlled by one single pole, one way switch complete all as specified.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V,complete all as specified.

Supply and fixing flame proof exhaust fan 18 inch dia single phase 240V 50 Hz including wall cutting and making good of surface,complete all as specified.

M & L for Point wiring PVC insulated unsheathed multistranded copper conductor FRLS cable using two single core 1.5 Sq.mm (nominal area) in and including 20mm dia nonmetallic rigid PVC conduit medium grade including fittings and accessories, one run of continuous single core copper cable of 1.5 Sq. mm connecting to common earth dolly, pressed steel terminal box, provision of 3 mm thick plastic laminated sheet cover for mounting of switches sockets for one 5Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified.

S & F Socket outlet multipurpose 3 pin, 5 Amp and 2 pin 5 Amp, flush type, complete all as specified.

S & F Switch piano, flush type, single pole, one way, 5 Amp, 230volts complete all as specified.

Supply and fixing heavy duty pedestal fan with regulator type 18 "(450mm) dia 230V 50Hz AC supply metal blade complete all as specified . Make Havells Model V3 or equivalent in performance in Bajaj/Crompton.

Supply and fixing wall mounting fan 400mm 230 Volts 50Hz with Oscilating and speed by string controll complete all as specifed and directed by Engineer in charge.Make Havells Model Platina Hs or equivalent in performance in Bajaj/Crompton.

M & L for chemical earthing using mixture of Magnesium sulphate(MgSO4)100kg,common Salat 200 Kg and charcol 300 Kg complete with copper earthing plate 90Cmx60Cmx5mm complete burried on ground vertically to a depth not less than 3.5 M below the ground level with top edge of the plate at a depth not less than 2.5 meter below ground level and mixture shuld be filled 15 cm above top edge of earth plate to active result not less than one ohm resistance ,including copper strip 25x4mm size by means of brass bolts,nuts,check nuts and washeres and brazing of copper earth strip protected by galvonised steel pipe 40mm bore light grade connected to main switch board or any othe electrical switch board or any othe electrical equipment all as shown in electrcal plate no 3 of SSR part I and including necessory excavation ,earth work in any type of soil and earth pit should be refill with black cotten /clay soil ,20mm medium grade water GI pipe for watering ,funnel with wire mesh ,PCC (1:2:4)type B1 reinforced with XPM of weight not less than 4 kg/Sqm and MS frame etc all as specified and directed by Engineer in charge

Material & labour in replacement for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 20 x 3 mm copper strip , complete all as specified and directed by Engineer-in-Charge.

Material & labour in replacement for test point made out of copper strip 32x6mm, 200 mm long brass nut bolts - 2 Nos and 12mm dia GI nut bolts 40mm long- 03 Nos complete all as specified and directed by Engineer-in-Charge.

Supply and fixing and testing ceiling fan 1200mm sweep ,copper wound ceiling fans, complete with three blade, down rod, accessories 230V, 1400mm sweep, with Squirrel cage induction motor white in colour Make Havells Model no SS 390 or its equilant in Crompton/Bajaj/Usha

Supply and fixing and testing ceiling fan 1200mm sweep ,copper wound ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor white in colour Make Havells Model no SS 390 or its equilant in Crompton/Bajaj.

Supply, installation,commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage 120 L and nominal cooling capacity 60 Ltrs /hr. Make :Voltas/Blue star/Usha

Supply and installation ,testing commissioning hi wall split units operates 230V 50Hz AC supply indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR with copper condencer including ,cutting chases for refrigeration piping connection cable,drain pipe etc in brick wall necessory brackets for mounting outdoor /indooor units cpmplete all as specified and directed by Engineer in charge Make: Voltas/Blue star/Samsung

Supply and fix refrigerator, electric driven (single phase), capacity 280 Litres.BEE 3 star rated operates 230V 50Hz AC supply complete all as specified Make: Voltas/LG/Samsung

Supply, installation,commis-sioning of Stainless steel powder coated 200 Ltrs capacity Metal Top Deep Freezer single phase 230 volt, 50 Hz 200 Ltrs Capacity of Make: Voltas/Blue star/Samsung

M & L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor including PVC casing & caping of suitable size and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories including taking down old sub main wiring complete all as specified. Note :- 2 Runs of 4 Sqmm wire and one run of 2.5 Sqmm with PVC casing & caping shall be measured as one unit .

Supply and fixing Sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 kA, including taking out old down unserviceable Sheet metal enclosure complete all as specified.

M & L for Point wiring PVC insulated unsheathed multistaranded copper conductor FRLS cable using two single core 1.5 Sqm (nominal area) in and including 20mm dia nonmetallic rigid PVC conduit medium grade including fittings and accessorie, one run of continuous single core copper cable of 1.5 Sqm connecting to common earth dolly, using the existing pressed steel terminal box, provision of 3mm thick plastic laminated sheet cover for mounting of switches sockets fan regulators etc & making good to disturbed surface area for the one light/fan point controlled by one single pole, one way switch complete all as specified.

Note:- Amount of credit of Rs. 5130.00 for retrieved materials is mentioned in Schedule of Credit Page No 120 of tender documents in pdf form which will be deducted offline while acceptance of tender.

B N FRIENDS AND CO