Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC | ₹7.2 L Quoted ₹7.7 L | L1 | Accepted-AOC Award of contract |
| 2 | L2₹8.6 LRejected-Finance | ₹8.6 L | L2 | Rejected-Finance Rejected |
| 3 | L3₹9.3 LRejected-Finance | ₹9.3 L | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | SRIDARSHAN ENTERPRISES L2 | rameshwar sharma L3 | SHANKER BOREWELLS AND ENGINEERS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck/ tractor where only road available, DTH & ODEX/ Percussion Calyx/ RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in- Charge. | 1 | Each | 5,000 ₹5,000 | 6,000 ₹6,000 | 4,000 ₹4,000 |
| 2.00Drilling bores of 165mm dia as per IS:2800-1979 using DTH from ground level in the over burden as per directions of Engineer-in-Charge/ Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sand stone, limestone, dolomites, conglomerate, silt, clay or any other type of sedimentary, metamorphic and igneous rock including cost of attachments, consumable stores, bits, water, POL etc. complete in all respect as detailed below:- | ||||||
| 2.01 | From 0m to 20m depth | 20 | P/Rmt | 800 ₹16,000 | 850 ₹17,000 | 600 ₹12,000 |
| 3.00Drilling bores of 152 mm dia as per IS : 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate, boulder, pebble,gravels, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0 mm thick MSERW fincut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directions of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | ||||||
| 3.01 | Non Trible Area | 138 | Per Rmt | 1,500 ₹2.1 L | 1,600 ₹2.2 L | 1,400 ₹1.9 L |
| 4.00Supplying and lowering of IS Marked 125 mm dia PVC casing pipe medium class 5mm thick screwed and socketed as per IS 12818-1992 (Part-1) with upto date ammendments including cost of all cuttings, factory threadings, welding, wherever required, in random lengths of 6 mtrs. including transportation charges (For DTH bores) complete in all respect as per direction of Engineer-in-charge. | ||||||
| 4.01 | Non Trible Area | 138 | Per Rmt | 700 ₹96,600 | 750 ₹1.0 L | 600 ₹82,800 |
| 5.00Supplying and lowering of IS Marked 125 mm dia N.B. 5mm thick fincut MSERW casing pipes as per IS : 4270-2001 and requirement of ODEX attachement from approved manufacturers complete in all respect as per direction of Engineer-in-charge. | ||||||
| 5.01 | Non Trible Area | 138 | Per Rmt | 1,700 ₹2.3 L | 1,750 ₹2.4 L | 1,625 ₹2.2 L |
| 6.00Prividing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer-in- Charge. | ||||||
Tender Value
₹8.5 L
EMD Value
₹17,050
Closing Date
13 Feb 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Solan
SH Drilling by DTH/ ODEX percussion/ Calyx/ RC portable rigs 138 metres deep and its energisation
2026_HPIPH_127247_1
20057-156 dated 30.01.2026
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
30 days
Chail
Please refer tender notice
8 documents required · 8 mandatory
₹500
Executive Engineer
₹17,050
4 May 2026
2 Feb 2026
13 Feb 2026
2 Feb 2026
13 Feb 2026
2 Feb 2026
Transportation of suitable truck/ tractor where only road available, DTH & ODEX/ Percussion Calyx/ RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in- Charge.
Drilling bores of 165mm dia as per IS:2800-1979 using DTH from ground level in the over burden as per directions of Engineer-in-Charge/ Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sand stone, limestone, dolomites, conglomerate, silt, clay or any other type of sedimentary, metamorphic and igneous rock including cost of attachments, consumable stores, bits, water, POL etc. complete in all respect as detailed below:-
From 0m to 20m depth
Drilling bores of 152 mm dia as per IS : 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate, boulder, pebble,gravels, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0 mm thick MSERW fincut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directions of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately.
Non Trible Area
Supplying and lowering of IS Marked 125 mm dia PVC casing pipe medium class 5mm thick screwed and socketed as per IS 12818-1992 (Part-1) with upto date ammendments including cost of all cuttings, factory threadings, welding, wherever required, in random lengths of 6 mtrs. including transportation charges (For DTH bores) complete in all respect as per direction of Engineer-in-charge.
Non Trible Area
Supplying and lowering of IS Marked 125 mm dia N.B. 5mm thick fincut MSERW casing pipes as per IS : 4270-2001 and requirement of ODEX attachement from approved manufacturers complete in all respect as per direction of Engineer-in-charge.
Non Trible Area
Prividing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer-in- Charge.
Non Trible Area
Collection and preservation of soil samples in polythene bags after every 1 metre complete in all respects as per directions of Engineer-in- charge.
Development of borewell and yield testing with air compressor through V notch and disinfection etc. complete in all respects as per IS 2800: 1979 and as per directions of Engineer-in Charge.
Providing & installing submersible pump conforming to ISS 9034-1976 alongwith directly coupled submersible type squirrel cage electric induction motor suitable for operation on 415 volt. 3 Phase 50 C.P.S.A.C supply water lubricated bearing and provided with pivoted segment thrust bearing to with stand normal vertical lead with minimum wear & tear and dully fitted with device to take upto the expension of water with heating of motor complete of make KSB/ Kirloskar/ Mather & Platt complete in all respect as per direction of Engineer-in-Charge. Discharge:- 70 LPS, Head:- 225 Mtr. (1set of 3HP).
Supply & fixing of L&T/ Havells/ Standard make control panel for submersible pump complete with shaft and angle iron, febricated dully painted and complete with internal wiring and comparising of air break starter mainswitch of suitable amp., T.P. volt meter, ameter, phase indicating lamps complete in all respects including entire carriage of material upto all lifts & leads.
Supply and fixing stainless steel rope wire suitable to wear the weight of motor pump complete in all respect.
Supplying and fixing supporting clamps to submersible pump sets complete in all respects including entire carriage of material upto all lifts & leads.
Supply & fixing of 4x6mm PVC insulated copper around cable complete in all respects including entire carriage of material upto all leads & lifts.
Lowering and jointing of HDPE pipe 32mm dia 10KG pressure heavy duty complete in all respects including entire carriage of material upto all lifts & leads.
Providing and fixing MS adaptor of 40x32mm complete in all respects including entire carriage of material upto all lifts & leads
Provision for automation complete in all respect as per direction of Engineer-in-Charge.
Providing resistivity survey at site for finding suitable point for boring and measurement of subsurface resistivity and aquifer mapping upto the depth of 150 meters with metal electrodes complete in all respect as per direction of Engineer-in-Charge.
Providing consecutive resistivity survey for finding suitable point for boring at another similar site after taking one measurement, for measurements of subsurface resistivity and aquifer mapping upto the depth of 150 meters with metal electrodes complete in all respect as per direction of Engineer-in-Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Form_6.pdf
Tender Documents • 0.83 MB
Form_8.pdf
Tender Documents • 1.34 MB
Terms_and_conditions.pdf
Tender Documents • 0.43 MB
BOQ_187864.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid