PROVN OF MAIN GATE AT 952 TPT ASC, TOILETS AT AEGIS AND 51 SUB AREA AND SPECIAL REPAIRS TO SUPPLY SYSTEMS AT SWIMMING POOL AND COOK HOUSE AT WEU UNDER GE NARANGI.

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of cables, pipes etc or for shafts, wells cesspits, man holes etc., not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Dismantling of plain or corrugated asbestos sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc complete all as specified and as directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed

Dismantling of timber and ceiling boards of any sizes any thickness, fixed with screws etc including cover fillets complete all as specified and as directed.

M&L for suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm, using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to form 600 mm x 600 mm grid and painted with two coats of oil bound distemper over a coat of primer before installing it on the grid all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for hardcore of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface etc. complete all as specified and as directed.

M & L for PCC 1:4:8, type D2, (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc., complete all as specified and as directed.

M & L for 75 mm thick, PCC 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in sub base, complete all as specified and as directed.

M & L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted.

M & L for RCC, 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. complete all as specified and as directed.

M & L for RCC, 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in beams, seismic bands, cantilevers, bressumers and lintels over 1.5 m span complete all as specified and as directed.

M & L for RCC, 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in lintel band, lintel upto 1.5 m span, including necessary formwork etc, complete all as specified and as directed.

M & L for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in columns, pillar, piers, posts and struts etc. complete all as specified and as directed.

M & L for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves, platform, chajjas etc and the like complete all as specified and as directed.

Demolition of brick or stone masonry work, built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed.

M & L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

All as per item no 21 above but except bricks

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4. complete all as specified and as directed.

Use and waste formwork to sides of concrete foundations, footing, bases of columns, plinth beams for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. for fair finished flat surfaces of concrete complete all as specified and as directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to soffits and sides of suspended slabs, chajjas such as roof slabs, chajjas and shelves not exceeding 200 mm thick (horizontal or sloping) for fair finished surface of complete all as specified and as directed.

Dismantling unframed timber scantling 40Sqcm and over in section in any position complete all as directed.

Dismantling timber scantling under 40 sqcm in section in fillets, rails, rafter, purlins etc fixed with nails/screw etc complete all as specified and as directed.

Taking down chowkats or frames with shutter (with out taking off shutters from the frames), area not exc 1.5 sqm each including all builders hardware etc, complete all as specified and as directed.

Taking down chowkats or frames with shutter (with out taking off shutters from the frames), area exc 1.5 sqm but not exc 4 sqm each including all builders hardware etc, complete all as specified and as directed.

S & F in repair, 20 mm thick, 2nd class hard wood boarding, clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc. complete as specified and as directed.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S & F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S & F factory made, solid PVC door shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed.

S & F 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and as directed.

S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

S & F stainless steel butt hinges 100 mm size, medium weight cold rolled and fixed complete all as specified and as directed.

S & F 150 mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 100 mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

S & F in repairs, powder coated aluminium alloy curtain rails 20 mm dia fixed to required lenghts etc complete all as specified and as directed.

S & F in repairs brass chromium plated curtain rails brackets fancy type for 20 mm dia curtain rails etc complete all as specified and as directed.

S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane etc complete all as specified and as directed.

S & F 4 mm thick, frosted sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and as directed

S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and as directed.

S & F steel helical door spring 300 mm size rat tail rod pattern spring, including roller and roller plate complete all as specified and as directed.

S & F block boards 18-19 mm thick , grade 1 quality, exterior grade, commercial decorative face vaneer both side type, fixed with screws to cup boards or any other places complete all as specified and as directed.

S & F 40 mm flap width continuous (piano) hinges, mild steel bright finish or elecrogalvanised complete all as specified and as directed.

S & F ball catches with 8 mm dia steel ball and brass body and striking plate incluing letting and fixed complete all as specified and as directed.

S & F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed

S & F mild steel TMT bars 6 mm to 8mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar and as in man hole steps / handles of cover including bending and fixing in position complete all as specified and as directed.

S & F mild steel TMT bar 5 mm dia and over up to 10 mm dia, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm in stirups dia complete all as specified and as directed.

Taking down wooden roof trusses, coupling rafters of clear span above 4 m & upto 8 m but including taking down trusses etc., complete all as specified and as directed.

M & L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

S & F mild steel section conforming to Fe 290 grade E-165 as in wind ties, fixed at eaves and ridge level etc complete all as specified and as directed.

S & F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

S & F steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and including 12 mm square bar or gaurd bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

S & F steel windows or ventilator fixed type, complete with glazing bars dovetailed of welded, ready for wire mesh / glass pane fixing complete all as specified and as directed.

S & F mild steel framed work of graade Fe 410-W(Grade 'E'-250) quality - A as in doors or gates of angle or other section with gusset plates, rails, braces,hold fast etc, complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening complete all as specified and as directed.

S & F 1.25 mm thick mild steel, plain, black sheet in cladding of steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

M & L for rendering 10 mm thick, on fair faces of brick / concrete surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick, in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two coats (Under coat 10 mm thick and finishing coat 5 mm thick) with finishing coat mixed with water proofing compound at the rate of 3% weight of cement as per manufacturer instructions, finished even and fair complete all as specified and as directed. Note:- Supply only water proofing compound shall be measured and paid for separately.

M & L for rendering 5 mm thick on concrete surface of ceiling in cement mortar 1:3 finished even and smooth wiithout using extra cement complete all as specified and as directed. .

M & L for rendering 10 mm thick, in cement mortar 1:3 on roof surfaces using water proofing compound at the rate of 3% by weight of cement as per manufacturer instructions complete all as specified and as directed. Note:- Supply only Water proofing compound shall be measured and paid for separately.

Supply only integral water proofing compound complete all as specified and as directed.

M & L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation of newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer etc complete all as specified and as directed.

M & L for preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for preparation of new steel surface not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colours of tiles, laid over and including 15 mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and as directed.

All as per item No. 77 above but as in vertical surfaces like dado or skirting, set & joined in neat cement slurry and pointed in white cement mixed with colour pigment to match with the colour of tiles, laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing laid over and including 20 mm thick screed in cement mortar (1:4) complete all as specified and as directed.

M & L for glazed ceramic coloured tiles, with edge cut joint free tiles of size 200 mm x 300 mm x 7 mm / 350 mm x 250 mm x 7 mm / 450 mm x 350 mm x 7 mm / 375 mm x 250 mm x 7 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar joined in neat cement slurry and pointed in white cement mixed with colour pigment to match colour of tiles, laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M & L for Granite work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like with and including 15 mm bedding in cement mortar 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and as directed.

Extra over item no 82 above for rounding / bevelling/ chamfering to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

M & L for pre polished chequered cement concrete tiles, area exc 0.6 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make, jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the colour of tiles, laid over and including screed bed of 20 mm thick cement mortar (1:4) for laying floor finishes complete all as specified and as directed.

Taking up or down steel tubing 15 mm dia galvanised along with fittings complete all as specified and as directed.

Taking up or down steel tubing 20 mm dia galvanised along with fittings complete all as specified and as directed.

S & F GI tubing 15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F bib taps 15 mm dia cast copper alloy chromium plated, crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F Angular / Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore of iron pipe or for union and fixed complete all as specified and as directed.

S & F swivel shower rose 125 mm dia, chromium plated fancy type for fixing with 15 mm pipe complete all as spd and as directed.

S & F 20 mm bore dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F brass chromium plated tubular towel rail of 20 mm dia and 60 cm in length, D shaped, between flanges complete all as specified and as directed.

S & F in repairs brass chromium plated tubular towel rail of 20 mm dia and 60 cm in length, D shaped, complete all as specified and as directed.

S & F glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S & F in repairs glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S & F in repair sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap 15 mm bore chromium plated cast copper alloy, with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe, PVC connection pipe complete all as specified and as directed.

S & F vitreous china wash hand basin, white, flat back size 550 mm x 400 mm, excluding taps, chain, plug and porcelain stopper but including brackets, flush pipe, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed, CP waste coupling 32 mm, cutting for and pinning in ends of bracket or erecting stand complete all as specified and as directed.

S & F vitreous China urinal partition white of size 310 x 770mm fixing with Screws and washer including filling with white cement and colouring pigment to match the shade of exisiting surface complete all as specified and directed.

S & F vitreous china urinal, half stall white (excluding flushing cistern) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and as directed.

M & L for vitreous China Squatting Pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rest etc., including 100 m dia S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

M & L for vitreous China wash down water closet (EWC) pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet 'Praayag' Cat Part No 5211 or Equivalent) including making connection to inlet flush pipe, & to 'P' or 'S' drain trap, including fixing of long special 'P' or 'S' trap complete and making good the disturbed portion etc. complete all as specified and as directed.

S & F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S & F in repairs 1000 litres capacity rotational moulded polye-thylene water storage tanks triple layer ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20 mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc. complete all as specified and as directed.

S & F 500 litres capacity rotational moulded polye-thylene water storage tanks triple layer ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20 mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc. complete all as specified and as directed.

Taking down drain pipe 110 mm dia from wall, floor etc including bends etc, complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

M & L for 100 mm dia of outlet, cast iron floor / nahani trap, with grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M & L in repairs 100 mm dia of outlet, cast iron floor / nahani trap, with grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Taking up old cable any size from trenches,poles for repair / replacement including brick protection, GI pipe etc, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core laid in trenches or fixed on poles etc,complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 3 core laid in trenches or fixed on poles etc, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 3 core laid in trenches or fixed on poles etc, complete all as specified and as directed.

M & L for fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and as directed. Note :- Punned thickness only shall be measured & paid.

M&L for bricks, sub class ‘B’ brick old size for cable protection laid flat in trenches over the cable perpendicular to the direction of cable complete all as specified and as directed

S & F LED flood lighting luminaries 120 Watts epoxy powder coated pressure dia cast aluminum IP 66 housing with wheatherproof gasket for LED's and control gear compartments, pressure die cast aluminium frame with heat resistant toughened clear glass fixed with SS screws LED Specification: CREE LED/Equivalent, Colour temp - 6500 K +/- 300 K Lens with twin core conductor complete including testing on completion. including taking down old street / flood light luminaries any type (sodium vapaur / tube light) from the pole etc, complete all as specified and as directed. Make- Crompton. Model-PLUTO NEO Cat part No LFLN-120-CDL/60-M / Halonix, cat No HLFLD - ML01-120-CWL - R, or equivalent of Philips/havells / centuri LED Ltd. Note :- (i) Driver of LED street light and luminaries should be of same make. (ii) Five years guarntee of LED bulbs shall be given.

M & L for LED Street lighting luminaries 60 Watts WSPD epoxy powder coated pressure die cast aluminum housing with wheatherproof gasket for LED's and control gear compartments, pressure die cast aluminium frame with heat resistant toughened clear glass fixed with SS screws LED Specification: CREE LED/Equivalent, Colour temp - 6500 K +/- 300 K Lens,,IP-66,Lumen efficiany >100 lm/w,surge protection 4kv internal (Built-in) with twin core conductor complete including testing on completion. including taking down old street flood light luminaries any type (sodium vapaur / tube light) from the pole etc, complete all as specified and as directed. Make: Havells CAT No. ENDURAPEARLPLUS60WLED757SASYTOPC / Crompton, NEXUS NEO, cat No LSTP - 60 - CDL-M / Halonix, Cat No HLSLD - ML 04 - 60 - CWL - HL2 - P- LDR or equivalent of Philips/Wipro. Make - (i) Driver of LED street light and luminaries should be of same make. (ii) Five years guarntee of LED bulbs shall be given

S & F in repairs, LED garden bollard/garden lights complete all as specified and as directed. Make-Crompton - Model MAYA-III, LBLA3-10-CDL, or equivalent in Halonix / centurs LED Ltd

S & F street light panel / distribution board with timer switch digital type, 24 hours setting, 32 A, 3 pole, 230 Volts, HSN code : 8537 complete all as specified and as directed. Make :- Indo - asian, cat No TL032 DBO / Havells, Cat No IHXT S03060 or equivalent in L & T

S & F in repairs transparent street light junction box of size 155x2100x92mm made of high quality polycarbonate IP65 (Dust and power jet proof according to IEC 60529), shock proof, rust free ,corrosion free acid and chemical resistant,fire retardant having high impact (IK08) totally insulated (class II) made of halogen and silica free recyclabe material UV resistant having high grade gasket made of polyurethane with Al-bus bar 25x5 mm -04 strip ,one no MCB DP 6 Amps with locking arrangement and M40 size cable gland and one M32 size gland suitable upto 50 sqmm cable complete as directed.Make : HENSEL cat no-KF1616G or equivalent in L & T.

M&L for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

S & F in repairs PVC insulated sheathed wire 1.5 Sqmm ,3 core with copper conductor of colour red,black and green for connection street light fittings from over head line/pole boxes complete all as specified and directed.

S & F G.I tube 40 mm bore light grade with all fittings fixed complete to wall/ceiling/pole or laid in trenches on floor includind cutting existing floor for protection of electric cable all as specified and as directed.

Taking down carefully any type of point wiring (light, fan, bell socket or power), complete excluding fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and directed.

M & L for wiring complete with 1.5 sqmm single core FRLS grade PVC insulated unsheathed,1100V grade copper multistranded in PVC concealed conduit & PVC insulated FRLS grade copper earth continuity conductor cable 1.5 sqmm connected to common earth dolly including steel terminal boxes made out of 1.2 mm thick MS sheet concealed in walls for housing the switches ,socket outlets ,fan regulators for one light/one fan point controlled by one switch complete all as specified and directed.

Same all as item no 129 here in before but for One 5A 3 pin switch socket outlet on same board..

Same all as item no 129 here in before but for One 5A 3 pin switch socket outlet mutipurpose on independent board.

All as per item No 129 here-in-before but wiring with 4sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 1.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed.

S&F switch piano, flush type single pole one way 5 Amps 240 volt complete all as specified and directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed.

S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and directed.

S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed.

S&F lamp holder, insulated,PVC/ polycarbonate /bakelite body complete all as specified and directed.

S&F lamp holder with LED 11 W BC-22 Type complete all as specified and directed.

S&F stepped type electronic fan regulator, two module size, flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed.

S&F LED box type fitting pre-wired including LED tube 1x20W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as directed. Make:- Jaguar Model-LGLZ01X020XC/ LGLZ01X020XN/LGLZ01X020XW. or equivalent model of make Philips /Bajaj/Crompton.

S&F in repairs, decorative hexagonal bulk head LED luminaire 10 Watt, 6000K with IP 66 protection complete all as specified and directed. Make- Havells Model- HEXAFT10WLED857SSYMBOPC or equivalent model of make Philips/Bajaj /Crompton.

S&F for ventilating Exhaust fan 300mm sweep,230 volts metal frame with blades and louvres fixing on existing place complete with nut bolts complete all as specified and directed. Make- Havells / USHA / Bajaj / Crompton.

S&F Single pole & neutral DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and dierected. Make :- Legrand Cat No 5076 10 or equivalent model of make Siemens/Schnider

S&F Single pole & neutral DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as dierected. Make :- Legrand Cat No 6077 11 or equivalent model of make Siemens/Schnider

S&F MCBs, SPN 6 to 32 Amps, 10 KA , IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed. Make :- Legrand Cat No 4086 18 4086 20 or equivalent model of make Siemens/Schnider.

S&F MCBs, SPN 40 to 63 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed. Make :- Legrand Cat No 4086 18 to 4086 20 or equivalent model of make Siemens/Schnider

S&F MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed. Make :- Legrand Cat No 4085 87 to 4085 95 or equivalent model of make Siemens/Schnider.

M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit conforming to IS-9537 with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and directed. (Note : 2 runs of 4 sqmm cable, 1 run of 1.5 sqmm single core copper cable and 1 run of non metalic PVC conduit shall be measured as single run).

M/S MANOJ PAUL

PK ENGINEERING

M/S SHARMA CONSTRUCTION