REPAIR AND MAINTENANCE OF CERTAIN B/R ITEMS IN MD/ OTM ACCN AT 2 AHQ AND OTHER AREAS IN THE AOR OF AGE B/R UNDER GE (U) MEERUT CANTT.

Taking down chowkats with shutter (Without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (Without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down shutter exc 1. Sqm but not exc 2 sqm each complete all as specified and as directed.

Taking down shutter exc 1. Sqm but not exc 2 sqm each with refixing in same opening with all fittings complete all as specified and as directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 150mm long stainless steel tower bolt complete all as specified and as directed.

S&F 150mm long stainless steel handles complete all as specified and as directed.

S&F butt hinges medium weight, colled rolled stainless steel 100 mm long complete all as specified and as directed.

S&F for 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire meshu sing Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified with fixing of iron grill 12mm square bar complete all as specified and as directed.. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.

Supply and fixing aluminum frame work for door with powder coated door shutters, powder coated of any colour (thickness of powder coating not less than 50 Micron) side hung type, without sash bars, aluminum section weighing 0.55 kg/m including all fitings as handles, tower bolts hinges & necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, anodised aluminium fittings,5.5mm thick ordinary plain glass complete all as specified and as directed.

S & F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S & F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive ofM.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) skelton WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges, wire mesh and necessary S S screws shall be paid separately)

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (122mm x 54mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected complete all as specified and as directed. accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (122mm x 54mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, 5mm thick frosted glass and required accessories complete all as specified and as directed. accessories. Net Opening will be measured lor payment purpose.) (A) Area exceeding 2.00 sqm each

M&L for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength og 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S/F in repairs plain sheet glass 3.00mm thick glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and as directed.

S/F in repairs frosted glass 3.00mm thick obscured or figured on one side & glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and as directed.

S/F in repairs plain sheet glass 4.8mm thick glazing with oil putty exc 0.50Sqm in each pane complete all as specified and as directed.

S & Fix in repairs galvanised iron wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galv. Wire stapples complete all as specified and as directed.

S and F in repair stainless steel sink 1 mm thick for kitchen, with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling complete all as directed.

S&F in replacement stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed..

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 29 but on skirtings incl 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 600mmx300mm 6 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 incl scafolding etc complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Please Enable Macros to View BoQ information