SPECIAL REPAIR AND ADDITION/ALTERATION TO BUILDING NO P-10,P-11 AND P-31 (TYPE-II) MARRIED ACCOMMODATION AT CGRA TUTICORIN UNDER GE(I) CG CHENNAI

Amount

Material and labour for Complete removal of existing treatment on wall surfaces and applying two coats of acrylic distemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on ceiling and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour complete removal of existing treatment by brushing, washing,rubbing down, stopping of distempered and painted surfaces and cleaing etc of wall surface including pilasters and cornices and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed. Make: Apex Ultima from Asian/Weather coat smooth Berger.

Material and labour for Preparation of old painted wood and wood based surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 sqm each but not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutters with fittings of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each and taken as credit complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix factory made 35mm thick 2nd class hard wood plain framed panelled shutter (any number of panels) with lock rail and panels of timber flat on both sides (feather edged ) or of 12mm thick veneered particle board medium density with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part-I) kilned seasoned and chemicaly presure treated complete all as spectified and as directed.

Supply and fix factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to cho

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including necessary joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,side huge type without sash bar , aluminium section weighing 0.55 kg/RM including necessary joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws and anodised aluminium fitting such as peg stays 150 mm long( 1 Nos), hinges type B-21 100 mm long (02 Nos) suitable handle (01 Nos) etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Material and labour for prelaminated particle board 18/19 mm thick ,interior grade ,prelaminated one side with decorative choice laminationsn with lipping fixed with screws to timber/wooden frame work, drawers, office table , partition work , cup board etc complete all as specified and as directed. MAKE:Century ply/kit ply/Green ply

Supply and fix Second class hard wood plain ,fillet , square ,recangular or triangular in section, clean sawn of size n. exc 03 sqcm secured with nails or brads fixed to wall for cupboards complete all as specifed and all as directed.

Material and labour for Preparation of new wooden surfacesof any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix 100 mm Butt hinges,ISI marked medium weighted Stainless steel ISI Marked,and fixed complete all as specified and as directed.

Supply and fix 125 mm Butt hinges,ISI marked medium weighted Stainless steel ISI Marked,and fixed complete all as specified and as directed.

Supply and fix fixed Continuous (Piano) Hinges, mild steel, bright finish or electro galavnised complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed to door with MS screws complete all as specified and as directed

Supply and fix 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or entruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed.

Supply and fix hasp and staple ,safety type ,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 100 mm complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Non skid matt finish ceramic coloured tiles ,Premium quality 9 to 10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid matt finish ceramic coloured tiles ,Premium quality 9 to 10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in skirting etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 350mmx250mm x7 mm thick/450x350x x 6mm/7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 10 mm thick complete all as specified and as directed. Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

Material and labour for green Marble stone work 18 to 20mm thick (table rubbed and polished) in single piece in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble stone over a screed bed/backing coat of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Material and labour for Granite stone 20mm thick (black galaxy) work (table rubbed and polished) in single piece in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a backing coat of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Supply and fix Plain sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

Supply and fix Stainless steel wire cloth, 036 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

Supply and fix aluminium powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 of DG 916 and DG 202) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

Supply and fix frosted sheet glass 4mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane fixed to aluminum frame complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 25 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 20 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 15 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 32 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16 & PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix in repair PVC valveless symphonic action type, flushing cistern 10 litres capacity low level, white, with inlet, ball valve, float and handle including brackets and connection to pipe and fixing of chain and pull or level if any with and including provision of polyethylene pipe of low and high density or PVC 32 mm dia for low level cistern complete all as specified and as directed

Supply anfd fix in repairsplastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices complete all as specified and as directed,

Supply and fix in repairs vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated shower rose size 125 mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type, long body 15mm dia bore Bib tap , cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type 15mm dia bore Angle stop valve concealed/open , cast copper alloy , screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges including brackets complete all as specified and as directed.

Supply and fix in repairs CP hand shower( health faucet) with 15 mm dia and 1500mm long flexible tube with wall hookcomplete all as specified and as directed.

Supply and fix in repairs 25/20 mm dia Aluminium powder coated curtain rods fixed over windows/door openings complete all as specified and as directed

Supply and fix in repairs 25 mm dia fancy Aluminium powder coated knobs/brackets for fixing curtain rod of 20 mm diameter complete all as specified and as directed.

Taking down cement plastering on lathing (other than wire netting) without removing lathing in cement mortar (one side measured in cases where both sides are plastered) including raking out joints,hacking for key,scrubbing down with water including removal of debris outside MD land complete all as specified and as directed. complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris outside MD land complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) type B-1 (1:2:4) using 20 mm aggregate in fins fasicas, louvers, parpet and railing exc 60cm in heights,newels, balustrade and like complete all as specified and as directed.

Material and labour to Formwork fins,louvers, fascia, parapet etc complete all as specified and as dircted.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick wall or stone masnory , mixed with water proofing compound as per manufacturer’s instruction , finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Material and labour for Rendering in CM 1:6, ,10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering in CM 1:3, ,5 mm thick on fair faces of brick work or concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris outside MD land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavings finished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50 meter c/c complete all as specified and as directed.

Supply and fix in repairs75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings such as bend, elbow, tee, Y etc with all access door and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix in repairs 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings such as bend, elbow, tee, Y etc with all access door and including taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC (SWR) floor trap of 75/110 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings such as bend, elbow, tee, Y etc with all access door and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings such as bend, elbow, tee, Y etc with all access door and iincluding taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme

Supply and fix 75 mm dia PVC (SWR) pipe double socketed in any length with rubber ring joints fixed to walls including all fittings such as bend, elbow, tee, Y etc with all access door and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix 110 mm dia PVC (SWR) pipe double socketed in any length with rubber ring joints fixed to walls including all fittings such as bend, elbow, tee, Y etc with all access door and iincluding taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC(SWR)vent cowl 110 mm dia complete all as specified and as directed .Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) gully trap of 125/110 mm dia of outlet , setting and jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply anfd fix in repairs Vitreous china wash down water closet pan, white ( including fixing bolts ) including connection to drain pipe and to flushing pipe etcand removing old one and taken as credit complete all as specified and as directed

Taking down exiting roof treatment cement plaster /tiles on roof including raking out joints,hacking for key,scrubbing down with water including removal of debris outside MD land complete all as specified and as directed. complete all as specified and as directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on surface by forced application over hot blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of bituminous primer 0.5 ltr /Sqm including application of aluminium primer @ 0.1 Kg /Sqm over one more coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm over APP Membrane complete all as specified and as directed.

Supply only Intergal Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

S & F Towel Ring of Chromium plated 300mm length/dia fixed with and including Chromium plated brass screwscomplete all as specified and as directed.

S & F Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S & F sheet glass shelf assemebly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chormium plated bracket guard and railing 60cm long complete all as specified and as directed.

Material and labour for Double action floor spring for fixed to door shutter and chowkhats of size 100mm, mild steel with steel wire spring, slove enamelled, black complete all as specified and as directed.

M&L Providing precast reinforced cement concrete type B1, 1:2:4 (20mm graded aggregate) as in cover slab etc including making of perforated holes if necessary comlete all as specified and as directed.

M & L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Supply and fix in repairs Call bell ding dong, AC, 230 V, single pole, including taking down old unserviceable calling bell and taken as credit complete all as specified and as directed. Make:- Anchor/Rider

Supply and fix in repairs Modular Bell push 6A 1 module including taking down old unserviceable bell push and taken as credit complete all as specified and as directed. Make:- Anchor/Rider

Supply and fix in repairs Modular switch 6 Amps ,single pole, one way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Modular socket 6A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Modular switch one way 16A, single pole, 1 module including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Modular socket 16A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs Stepped type electronic fan regulator flush type , socket type , 230V on the existing phenolic laminated sheet including taking down old unserviceable one and taken as credit complete all as specified and directed Make :Legrand/Anchor/Rider

Material and labour for Painting of ceiling fan/Exahust fan/DB panel of any size/make/model complete in site with synthetic enamel paint by spray painting including filling cavities with filler after cleaning all dust etc and numbering of ceiling fan complete all as specified and directed .

Supply and fix modular white cover plate with frame 1 Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR /LEGRAND/ABB

Supply and fix modular white cover plate with frame 2 Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR /LEGRAND/ABB

Supply and fix modular white cover plate with frame 3- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular white cover plate with frame 6- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular metal flush box for 1 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 2 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 3 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 6 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix MCB SP of rating 6-40Amps , 240 V, C curve ,Rupturing capacity 10KA including taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix MCB SPN of rating 40Amps , 240 V, C curve ,Rupturing capacity 10KA including taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix in repair ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix in repair capacitor 2.5 MFD suitable for ceiling fan complete all as specified and as directed.(Make : usha/Keltron/Uptran)

Material and labour for dismantling ceiling fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for dismantling exhaust fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for checking the ceiling fan clamps /split pin.rubber bushes ,canopy condition and replace the above items if found unserviceable to ensure safety of hanging of ceiling fans at CGRA qutrs/OTM accn complete all as specified and as directed. Note: The rate by the tenderer shall be inclusive of cost of clamps/split pin/rubber bushes/canopy etc

Supply and fix louver suitable exhaust fan 300mm with protection mesh and without shutter to avoid birds entering including taking down unserviceable louvers complete all as specified and directed.

Supply and fix LED Secuity light fittings 20W of minimum 110LPW made up of pressure die cast housing with toughed glass with optics/diffuser with suitable integral electronic drives, IP66 protection complete including taking down unserviceable security ligh fitting any type any watts complete all as specified and as directed. Make: Crompton LSTS-20-CDL-M equivalent in Havells/Philips/Wipro.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including non metallic rigid PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Concealing the existing the point wiring with replacing the existing PVC with the same size at the site and making the surface good as specified and as directed

Material and labour for Earthing complete with galvanisedsteel pipe electrode, 40mm bore,medium grade, 2.5 metres length,buried directly and preferablyvertically in ground with top edgenot less than 1.25metres belowground level connected withearthing lead of 4mm dia galvanised iron or steel wire all as shown inPlate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as specified and directed.

Supply of LED light fittings 20W, 230V, 4ft, wall mount type min 6500K with suitable integral electronic drives , CRCA/poly carbonate type complete all as specifed and as directed. Make Crompton Light Linea 20 W 4 feet or equivalent in Havells/Philips.

Supply of LED light fittings 10W, 230V, 2ft, wall mount type min 6500K with suitable integral electronic drives , CRCA/poly carbonate type complete all as specifed and as directed. Make Crompton Light Linea 10 W 2 feet or equivalent in Havells/Philips.

Supply & Fix in repairs Modular switch 6 Amps, single pole, two way, 1 module complete all as specified and as directed

Material and laobur of Rendering 15 mm thick on fair faces of concrete surfaces for applying roof treatment in CM 1:4 with water proofing compound and prepared the roof top surfaces Add Note: Water will be retained in the rooftop for 07 days for testing water tightness of the roof before doing APP Membrane, passing for payment. Payment will be processed after the successful completion of water tightness of roof only.

ARUVI CONSTRUCTION

SIVAN BUILDERS

VVM CONSTRUCTIONS

Banyan Engineers and Contractors

S KUMARAN