Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H1₹18.7 LAccepted-AOC | H1 | Accepted-AOC H1 | |
| 2 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹22 L
EMD Value
₹22,000
Closing Date
23 Sept 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer
Mandaikadu Town Panchayat
Construction of public library Annexure building at Kovilanvilai branch in MandaikaduTown Panchayat
2024_DTP_485474_1
71/2024/A1
Open Tender
Civil Works - Buildings
Works
180 days
Mandaikadu Town Panchayat
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹22,000
5 Oct 2024
19 Sept 2024
23 Sept 2024
19 Sept 2024
23 Sept 2024
19 Sept 2024
Amount
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete
Footing
Grade Beam
Supply collection and filling of Quarry rubbish from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation property etc complete. TNDSS No.301 & 305
Plain Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc complete as per the standard specifications. TNDSS No: 28V, VI (S2), V, VI (S5A) VII
Supplying and erecting steel centering for sides and soffits including supports and strutting up to 3.29 m height for plain surface as RCC slabs, recangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth Specification No:30 & 36 (Plain surface)
Supplying and erecting steel centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as RSS slabs, stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth Specification No:30 & 36
square column
RCC Work
Providing and laying in position, standardised design mix M-25 Grade using 20mm and downgraded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.00 cu.m.) 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156Kg of 10-12mm machine crushed jelly and with about (4.79 cu.m.) 7670 Kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without clambing extra, etc. complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine Aggregates to be used should comply with the rate.
Basement
Ground Floor
Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97 V, VI (S6) VII (S6) VII-3
Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8¾"x 4¼"x2¾" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.
Basement
super structure-Ground floor
Supply, Collection and filling well Gravel from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation property etc complete. TNDSS No.301 & 305
Plastering with cement mortar (1:5) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
Plastering with cement mortar (1:3) 10mm, thick including cost and conveyance of all materials and labour charges etc. complete as per standard specifications [Clause : 1000/ 1300]
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc. and all labour charges etc. complete as per standard specification and as directed by the departmental officers before use in the works
Paving floor with Plain/ Design Ceramic tiles (Colour and shade as directed) of stain Free Nano Polish Vitified Tiles of size 600x 600x 8mm in all floors over a base layer of cm 1:3 mix 20mm thick laid in situ and pointed with same coloured cement (White cement mixed with colouring pigment) neatly and fixed in position so as to make it perfectly smooth and shining, to the alignment etc. complete complying with standard specifications and as sample colour and shde of the ceramic tiles should be got approved from the departmental officers before use in the works
Paving the floor with Joint free rectified glazed ceramic tiles of size 305 X 305 X 8mm in all floors over the base layer of cement mortar 1:3 20mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc. complete as directed by the departmental officers
Dadooing the walls with glazed tiles of 30 cm x 20 cm 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg/m2 neatly as directed - including cost of all materials and labour charges etc complete as per SS
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.
Supply and fixing of M.S Grills for Doors and Windows, Ventilators, etc including redoxide priming coat and cost of materials and all labour charges etc. complete
Painting two coats over new iron works with ready mixed paint of approved quality and colour including cost of all materials and labour charges etc complete as per SS
Providing & fixing 4" dia PVC rain water down fall pipes with necessary PVC shoes, pvc bends, other specials clamps, screws, nails, teekwood plucks etc, complete including cost of all materials and labour charges as per SS. For 110mm dia pipe 4kg. Per cm2
Solid PVC door shutters using 19 gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thock soild PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rididly fixed in position including necessary furniture and fittings. The Over all size of top rail, Lock rail and bottom rail shall be 75mmx 30mm. The ovcer all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter
Weathering course with concrete brocken brick jelly 20 mm size in pure slacked lime over roof slab the proportion of brick jelly to lime being 32 to 12.5 well beaten with wooden beaters for giving required slope and thickness as directed by the departmental officers.
Terrace flooring with Hydraulic pressed tiles of size 20X20X2 cm laid in cm 1:3 mixed with crude oil % by weight of cement and pointed with same oiled mortar etc complete as per SS
Stainless Steel Door Frame of size 100mmx 60mm with a rebate of 30/ 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc. (PWD schedule of rate 2023-2024
Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos, 150mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos, and 1No. Door stopper etc complete.
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc complete. (m-0651)
Earthing as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of Dia not less than 40mm and with 20mm Dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoat, common salt, G.I.reducer, check nuts etc., and mansonry workhand providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (SD 234)
Supplying and run off 8 SWG copper wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.(SD75)
Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neutral links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / Isolator (totally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in all respects as directed by the departmental officers (SD No 179)
Supply and run off 2 of 2.50 sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (derived from SD 55)
Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54)
Supply and fixing of TNEB meter Board suitable for 32A Three phase service connection with 32A fuse unit(500V)32A neutral link and earth link (1" x 1/8" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supportingT.W.reepers of 1" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection with 7/20 PVCinsulated copper wire from EBmeter to fuse unit. SD 127)
Supply and run of 4 core 16 Sq.mm PVC Armoured cable of 1100 V grade with ISI mark. (m-1562)
Supply and run of 4 core 10 Sq.mm PVC Armoured cable of 1100 V grade with ISI mark (m-1561)
Wiring with 2 x 1.5 sqmm (22/0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23
Wiring with 2 x 1.5 sqmm (22/0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38
18W LED 3000K Round Type Recessed Fitting with LED (Electrical Data 2023-2024)
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic regulator with300mm down rod on the existing clamp (SD110)
Supply and fixing of 400mm Sweep-wall mount fan mount fan (PWD Schedule of rate 2023-2024)
Supplying and fixing in position best quality PVC soil/waste pipes of various dia having 6kg/ sq.cm pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to wall with specials PVC/ MS clamp, teak wood plugs, brass screws, etc and making connection to all sanitary fittings, dismantling masonary/ RCC works wherever found necessary and making the good dismantledportion to the original condition, including testing for any leakages etc. complete complying with standard specifications. The rate for earth work excation will be measured and paid separately in the cases where the pipe lines are propoesd to laid below ground level
Supply and delivery and fixing of HDPE tank as per IS12701/1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
25mm Gun metal Gate Valve (m-0501)
40mm Gun metal Gate Valve
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
SD Tap
Pillar Tap
Supplying, laying and jointing PVC pipes (having working pressure 10 kg./sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.
25mm dia
32mm dia
Supplying and delivery of following pipes and specials
25mm PVC coupler 10 ksc
32mm PVC coupler 10 ksc
25mm PVC elbow 10 ksc
32mm PVC elbow 10 ksc
25mm PVC Bend 10 ksc
32mm PVC Bend 10 ksc
25mm PVC Tee 10 ksc
32mm PVC Tee 10 ksc
25mm PVC end cap
32mm PVC end cap
25 mm x 20 mm Reducer
32 mm x 25 mm Reducer
25 mm x 20 mm Reducer Tee
32 mm x 25 mm Reducer Tee
25 mm x 20 mm Reducer Elbow
32 mm x 25 mm Reducer Elbow
25mm Pipe Jet Nipple
32mm Pipe Jet Nipple
Supplying and fixing in position 15mm dia CP Shower rose & stop cock of approved make confirming to IS specifications and quality including cost of Shellac thread etc. complying with standard specification.
CP Shower Rose
Stop Cock
Supplying and fixing in position CP Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and CP Screws etc complete complying with standard specification.
Supplying and fixing in position CP Soap tray of size 150 x 150mm including cost of teak wood plug and CP screws. etc. complete complying with standard specification.
Supply and delivery of Electric Monoset centrifugal pump conforming to IS9079:2002 asamended from time to time ,with CIFG200 Casing, hydraulically and dynamically balanced BronzegradeLTB-2 impeller, impeller ring and casing ring,stainlesss teel shaft capable of discharging required quantity of water against a total head noted below due to all causes. Pump shall of BEE 3 Star Rated and capable of discharging the specified quantity at the head noted at theminimum NPSHA at sit conditions. The shut off head shall beat least 25% over and above the head at duty point. The pump shall be suitable for operation in A Cthreephase,415V+/-10%,50Hz+/-5%. Squirrel cage induction motor for continuous operation.The speed of the Pump and Motor shall be not less than 2700 to 2900 RPM respectively.(250x20) TWAD SOR Pg 99
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC /12.5 liters capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .