REPAIR TO FLOORING, PLASTERING, PLINTH ETC IN MD ACCN ZONE B UNDER AOR AGE B/R-III OF GE(NORTH) BATHINDA AT BATHINDA MIL STN

Amount

Taking down shutters from the chowkhats, exceeding 1.0 sqm but not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs etc all as specified and as directed by Engineer-in- charge.

Resecuring and easing & adjusting without taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including all fittings as directed

Material & labour for double charge stain free Vitrified ceramic tiles, Premium (1st) quality straight edge, coloured tiles having size not less than 595x595 mm and 8 mm thick, in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 20 mm thick screed bed in cement mortar 1:4 and pointed in epoxy grout to match including dismantling old floor/tiling and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

All as per item no. 3 here in before but coloured tiles 595x100 mm and not less than 8 mm thick on vertical surfaces such as skirting, set & jointed in neat cement slurry and pointed in epoxy grout to match the floor tiles, over & including 10mm thick screed in cement mortar 1:4 complete as directed by Engineer-in-charge including dismantling old floor/tiling and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors, area of each tile exc 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed in cement mortar 1:6including dismantling old floor/tiling and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in skirting, dados etc. area of each tile exc 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick plaster in cement mortar 1:4 including dismantling old floor/tiling and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for glazed ceramic coloured tiles of size (300x450)x7/8 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match including dismantling old floor/tiling and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Granite work (of any type and any colour) 18-20mm thick (table rubbed and polished) in cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including cutting and polishing laid over 15 mm thick in cement mortar 1:4 etc including dismantling old floor/ tiling/ stone slab and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for rounding to edges of slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

Material & labour Chequered cement concrete tiles 20cm x 20cm x 25mm/30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors /path with grey cement & no pigment over and including 15mm thick screed in cement mortar (1:6) including dismantling old floor/ tiling/ stone slab and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Machine pressed precast concrete factory made interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment including dismantling old floor/ tiling/ stone slaband removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 25 mm thick sand filling under interlocking tiles including watering and consolidation.

Material & labour for Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base under floors/ interlocking tiles 75 mm thick finished even & fair complete all as specified and directed by Engineer-in-Charge.

Material & labour cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) as in copings/kerb stone, packing around interlocking paver blocks,chequred tiles etc. all as specified.

Demolition of cement concrete (unreinforced) concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour 75mm thick PCC 1: 3: 6 type C-2 ( using 40mm graded stone aggregate ) in plinth protection , including finishing the surface even and smooth without using extra cement.

Material & labour for rendering 15 mm thick on internal surface at any storey or any height in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed by Engineer in charge including taking down old plaster and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering/plastering 10mm thick in cement mortar (1:3) on any face of ceiling, finished fair and even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge including taking down old plaster and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour 15mm thick external cement plaster at any story or any height in CM 1:4 & finishing the surface even & smooth without using extra cement all as specified and directed by engineer-in-charge including taking down old plaster and removing rubbish material from building and thrown in low lying areas (as per direction of AGE/JE) at any distance upto 500 metre from the site complete all as specified and as directed by Engineer-in-Charge.

Material & labour for three coats of white wash on ceilings incl preparation of newly plastered surfaces complete all as specified and directed by Engineer in charge

Material & labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distempering on plastered surfaces complete all as specified and directed

Material & labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint (one coat as a priming coat) complete all as specified and directed

Material and labour for brick work with sub class ‘B’ old size bricks, in cement mortar (1:6), straight or curved on plan exc. 6 metre mean radius, including demolition of old brick work complete all as specified and as directed by Engineer-in-charge.

Material and labour for 100 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregates) as in sub floors, sub bases of floor, finished even & fair complete all as spcified and as directed by Engineer-in-charge.

M J BUILDERS (BID ID -3197486)

FATEH ENTERPRISES (BID ID -3196169)

R K GOYAL & COMPANY (BID ID -3197583)

M/s HANS BROTHERS (BID ID -3197531)

M/s Balvinder Singh Engineer and Contractors (BID ID -3196887)

M/s Goyal Builders (BID ID -3197441)

M/S SAI BUILDERS (BID ID -3197576)

M/S VIAJY BUILDERS & DEVELOPERS (BID ID -3197478)

M/s MITTAL CONSTRUCTIONS (BID ID -3196659)

M/s VISHAL ELECTRIC STORE (BID ID -3197657)

M/s GURFATEH BUILDERS (BID ID -3197661)

M/S VERMA BUILDERS & DEVELOPERS (BID ID -3196127)

G N CONSTRUCTIONS (BID ID -3197336)