Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹39.4 L+₹1.4 L (3.72%)Rejected-AOC | L2 | Rejected-AOC NOT BEING LOWEST | |
| 3 | L3₹40.2 L+₹2.2 L (5.80%)Rejected-AOC | L3 | Rejected-AOC NOT BEING LOWEST | |
| 4 | L4₹47.8 L+₹9.8 L (25.9%)Rejected-AOC | L4 | Rejected-AOC NOT BEING LOWEST |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
6 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF LOHEGAON
GE AF LOHEGAON LOHEGAON PUNE-411032
CERTAIN REPAIR/MAINTAINENANCE WORK IN OMQ, SINGLE OFFICER ACCN, OFFICER MESS UNDER GE (AF) LOHEGAON AF STN PUNE
2023_MES_594500_2
8693
Open Tender
Civil Works
Item Rate
330 days
OMQ, SMQ, OFFICERS MESS
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹94,000
Yes
11 Nov 2023
17 Aug 2023
13 Sept 2023
17 Aug 2023
6 Sept 2023
24 Aug 2023
Amount
S & F in repair for 15 mm bore bib tap fancy type chromium plated cast copper alloy with wall flange complete all as specified and directed
S&F in repairs 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified.
S &F in repair 15mm dia bore stop valves, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, but fancy type chromium plated screwed both ends for iorn pipe or for unions and fixed all as specified and directed.
S & F wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe connecting legs and wall flange (wihtout hand and over head shower) all as specified and directed.
S &F in repair 15mm dia bore stop valves, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, but fancy type chromium plated with long shank and cup (Concealed type) screwed both ends for iorn pipe or for unions and fixed all as specified and directed.
S & F in repair Angular stop cock with flange , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair for 15 mm dia CP pillar cock, cast copper alloy complete all as specified and directed.
S &F Two way bib cock with wall flange 15mm dia all as specified and directed.
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .
S & F in repair brass Chromium plated shower roses 125mm size with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.
S & F Corner glass shelf with brackets all as specified and directed.
S &F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed
Supply and fixing in repair 15mm dia bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms all as specified and directed.
S&F 15mm Bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed and specified
All as per item no 14 above but 20 mm bore of pipe gun metal valve.
S & F in repairs brass spindle to item No 1,2,3,5 & 6 above suitable for 15mm bib cock/stop cock/angle cock/CP piller cock all as directed.
S & F in repairs to item No 4,7 & 8 above brass spindle / brass face suitable for 15 mm wall mixer/WHB Mixer /Sink Mixer/CP pillar cock all as directed
S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed
S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed
S&F in repair vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valve less, symphonic action type complete with inlet ball valve, float and handle.
S&F vitreous chinaware EWC including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe, PVC low level flushing cistern 10 ltr capacity with brackets and all necessary fittings etc complete all as directed and specified incl PVC seat cover fixed in repair
S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, 32 mm dia all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm in repairs.
S & F in repair of Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule fixed in repairs 20mm dia
S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed
S&F in repairs PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit )complete all as specified
S &F in repair flushing wiser in flush tank complete all as specified and directed.
S&F in repairs flush tank handle PVC with adjustable Lever and hook for low level flushing cistern all as directed.
S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm.
S&F Brass chromium plated tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair.
S &F in repair 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete in repairs
S & F in repair Aluminium (extruded section bodey) door closer hydraulically regualted desiganation No 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed all as specifeid and directed.
M & L in repair double action floor spring hydraulically regualted made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governng pivot made of brass other parts made of mild steel heavy duty and fixed all as specified and directed.
Cleaning of old steel concealed pipe line through pressure of 1 HP Motar,(Back pressure method) so all dirt and corrision dirt go to tank and pipefree from dirt all as specified and directed. (This item apply where water pressure less in bathroom/kitchen). Note : All T &P and Labour considered in this items).
Cleaning blockage in rain water pipe by removing the clamps and rounding etc and refixing old clamps in position in cement mortar 1:6 complete all as directed and as specified.
S&F in repairs 32mm bore dia of discharge pipe (mm) Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm bore-45gms for WHB complete all as specified.
S&F in repairs 40mm bore dia of discharge pipe (mm) Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm bore 60 gms for SINK complete all as specified.
S&F in repairs 32mm bore and 750mm long PVC waste pipe for WHB complete all as specified.
S &F in repairs 40mm bore and 750mm long PVC waste pipe for Sink complete all as specified and directed.
S&F in repair plastic water closet(EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified.
S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding and PVC low level flushing cistern 10 Ltr capacity including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.
Dismantling structural steel work in cluding doors, gates, rolling shutters etc but excluding framed truss etc all as specified and directed.
S &F steel rolling shtters, without ball barings, as specified including top cover anchoring ord, hasp and staple and one shop coat of primer etected in position as indicated complete push pull or manual type all as specified and directed.
S& F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with hold fast and brackets complete all as specified and directed.
S&F in repairs ball bearing for rolling shutters complete all as specified and directed.
Securing glass of any description in existing wooden frames glazed with putty/beads including removing loose or decayed putty/beads, painting oiling one coat on rebated grooves, reputtying and painting/oiling puttied surface to match existing work.(New length of frame reputtied shall be measured)
All as per item no 47 above but secruing glass in metal frames
S&F 10mm thick toughned glass as in hinged doors, partitions automatic doors and smimilar work including cutting to shape, drilling holes required all as specified and directed.
S & F Harrison rails, Stainless steel with fixing brackets,stops, rollers etc. 20 mm dia curtain rod all as approved by E-in-Charge .
S & F 4.8mm thick sheet glass plain ordinary quality fixed in Repair With rubber packing, aluminium beading and oil putty in window/door, area not exceeding 0.50 sqm each pane as specified and directed by Engr-in Charge
S&F in repairs 300mm size of bolt aluminium anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.
S & F 100mm Hasp and staple safety type aluminium anodised including bolt to hinge plate and fixed with screws all as specified and directed.
M&L Repair welding works n. exc 2.5cm in length to steel windows, handles, door springs to iron frame of doors steel structure and other misc iron repair works by welding of Thickness of Metal to be welded n. exc 6mm thick
M&L Easing of steel window/ventilator by using oiling, greasing, welding etc making good condition all as specified and directed.
M & L for in repair for 2nd class hardwood 20mm thickness of board planks width n exc 20cm in Eaves board. Removing all old planks /damaged planks from eaves and fixed wihtout any finanaical effect and making good condition(Eaves boards building)
Drilling of holes in cooking platform, exc 3cm but n exc 12 dia of holes exc 12mm and nexc 25mm all as specified and directed.
Bathroom and Kitchen Area only :-Complete removing of filling materials between loose tiles joints and refilling them with mixture of white mixture of white cement and pigment to match the joints with tile surface and cleaning the complete surface from stain and other foreign material complete all as specified and directed.
Dismantling single layer Mangalore pattern tiles or similar tiles in roofing
Dismantling battens exc 15cm for tiles any size incl tilting fillets
Dismantling timber in fillets rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work
M&L for roof tiles Mangalore pattern interlocking at side joints laid dry
All as per item above except tiles.
M&L ridge or hip tiles to suite Manglore pattern of roofing bedded and jointed in CM 1:6 etc complete.
All as per item above except ridge tiles.
M&L for IInd Class HW clean sawn batten at 30cm centre to centre sectional area exc. 5 and n.exc 15 Sqcm
All as per item no 66 above except batten.
M&L for preparation of wood surfaces and wood based material new or old of any description and girth not other wise described and treated with two coats of creosote
M&L for IInd class H.W. timber framed and fixed scantling clean sawn
Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings.
S&F Plain galvanised mild steel sheet 0.63mm thick in ridges hips, valley gutter, drip and straight flashing etc complete
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed withcoach screws and washers, in roofs, walls etc with grade of zinc coating 120 all as specified and directed.
S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- Fe A
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S & F Rolled Mild Steel roof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc., complete.
S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 25mm dia
M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs
M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs
M&L for GI tubing 25mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs
M&L for cutting chases, pinning in making good to face for concealed water tubing
Disconnecting existing water tank exc 500 ltr and nexc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt etc from tanks and from mouth of circulatring pipes and re-fixing in position all as directed competete. (Note : For cleaning purpose only)
All as per item no 87 above but exc 250 and n.exc 500ltr capacity complete all as directed( Note : For cleaning purpose only)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 sq m but not exceeding 0.11 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:6 complete all as specified and directed.
M&L Glazed Ceramic Coloured Tiles, 350X250X7mm/450X350X7/ 300x200x7/600x450x7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.
M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over 20mm thick screed bed in CM 1:6 including dismantling of stone slabs all as specified and directed.
Demolition of cement concrete in ground floors and paving's n.exc 15 cm thickness (below or above ground level)
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.and finished the cement concrete surfaces even and smooth with out using extra cement complete all as specified and directed.
M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection
M&L for 100 mm thick cement concrete Type B-2, 1:2:4 (using 20mm graded stone aggregate), as in floors, etc, and finished the cement concrete surfaces even and smooth with out using extra cement, complete all as specified and as directed.
Dismantling of wall/ceiling board of any thickness including cover fillets etc all as directed
Material and labour for suspended false ceiling using anodized aluminum snap grid frame work. Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Perforated particle board/tiles for insulation and acoustic purposes, 60 x 60 cm size, fixed on snap grid 12mm thick confirming to IS 2095, 2995 Part I fixed with 25mm dry wall screws @ 230 mm C/C with screw driver to match surface attachment. Finally board have to be joined and finished to have a flush look using jointing compound/tape as per manufacturer instruction. With Designing as per direction in two steps complete all as specified and directed by Engineer in Charge.
M&L for false ceiling with 10mm thick 600x900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge, thick grid work, main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper all as directed by Engineer-in-Charge.
M&L for Plaster of paris decorative cornices/ moulding to the pattern as approved by Engineer in Charge of cross sectional dimension exc 13 Sqmm and n.exc 25 Sqcm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling all as directed by Engineer-in-Charge.
Demolition of stone / block masonry built in CM.
M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) 20mm graded aggregate and set in CM (1:6) all as specified and directed.
Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each
Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm.
Taking down shutters of any description n exc 1 sq. m each.
Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.
Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.
S&F aluminium powder coated three track sliding window with two shutters of 5mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining including frame work etc complete all as specified. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.
M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh including frame work etc complete all as specified and directed by Engineer-in-Charge.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F 35 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc.complete all as specified and as directed.
S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 mm size Aluminium handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.
S&F 300 mm long Aluminium sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
Taking down cement plaster on brick/ stone wall including raking out joints, hacking for key scrubbing down with water etc. and clearing off the premises.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement.
M&L for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement but incl WPC all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistantance primer.
M&L for preparation of new treated plastered / unplastered surfaces by brooming down with steel brush and applying two coat of cement base paint on existing tint.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings.
S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.
S&F in repair galvanized steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Dismantling of PVC water tanks of 500 ltr capacity and removing to store and all as specified and directed by Engr-in-Charge.
Dismantling of PVC water tanks of 1000 ltr capacity removing to store and all as specified and directed by Engr-in-Charge.
S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.
S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel fancy type curtain rod 20 mm bore including fixing of brackets and Dome on boths end of each curtain all as specified & as directed.
Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors
All as per item no 136 above but 110mm dia
M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia
All as per item no 138 above but 110mm dia
M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door
M&L for PVC (SWR) vent cowl of 110mm dia
S&F in repair PVC (SWR) Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).
S & F Grating doom 100mm dia of Stainless steel with holes/without holes for waste pipes all as specified and directed.
Dismantling wooden boarding, any description, fixed in any position with screws complete all as specified and directed .
M & L for 18mm veneered decorative plywood, grade I (with BWR basin ) with decorative faces fixed with screws to timber framed work all as specified and directed.
All as per item no 145 abovebut 12mm thick only one face has decorative veneer.
M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area n. exc. 6 Sqcm.
M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc. 6 Sqcm and not. exc 13 Sq cm.
S/F butt hinges 75mm extruded brass with MS hinges pin, bright polished and fixed type D-11 complete all as specified and directed .
S/F brass handles extruded fabricated type 100mm size complete all as specified and directed .
M/L for French polishing on wooden surface of any description including cleaning and preparing the surfaces with a coat of wood filler and two or more coats of French polishing till the desired finish is obtained.
M&L for preparation of new surface of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer.
Supply and Fixing for Telescopic drawer channel of Stainless steel zinc finish (silver colour) of weight capacity minimum 35 kgs including necessary fixing arrangements hinges and SS screws all as specified and as directed. (Note : Item No 154 to 157 are Considered for Modular Kitchen repair Purpose only ).
Supply and Fixing soild handle of Stainless steel chromium plated of 200 mm “D” shape including necessary fixing arrangements hinges and screws complete all as specified and as directed.
Supply and Fixing ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and necessary fixing arrangements hinges and SS screws complete all as specified and as directed.
Supply and Fixing Veneered decorative plywood grade I, Machine Press (with BWR resin) with decorative face veneers on one side and other side balancing with white lamination assembled as in drawers/cupboards moulded (Modular Kitchen) as required including necessary fixing arrangements all as directed.
M & L Machine cut cudappah stone slab 20-25mm thick over 10mm thick plaster of cement 1:3 in wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M/S SANDEEP CONSTRUCTION COMPANY
santulan & Company
M/s DEVRATAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .