REPAIRS TO FLOORING, PLASTERING,ROOF ,PLINTH PROTECTION AND FALSE CEILING AND JOINERY IN OTM ACCN OF ZONE A AS UNDER AGE BR-I AT MILITARY STN SRI GANGANAGAR

Amount

Dismantling of brick work including all quoins, arches, pillar etc. built in cement mortar complete all as specified and directed by Engineer - in - Charge.

M&L for brick work with sub class ‘B’ bricks, exc. 6m mean radius using old size sub class'B' bricks bulit in CM 1:6 complete all as specified and directed by Engineer - in - Charge. .

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius bulit in CM 1:6 but except bricks complete all as specified and directed by Engineer - in - Charge.Note:- Servicable bricks obtained srl item No 1 shall be re-used.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engineer - in - Charge.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) of any description complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick cement concrete (1:2:4) type B-1, (20 mm graded stone aggregate) as in flooring finished the surface even fair and smooth complete all as specified and directed by Engineer - in - Charge

M & L for 50mm thick cement concrete type C-1, 1:3:6 (20mm graged stone aggregate) as in plinth protection finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thick cement concrete (1:2:4) type B-1, (20 mm graded stone aggregate) as in hard standing finished the surface even fair and smooth complete all as specified and directed by Engineer - in - Charge

M&L for PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in foundation , filling and mass concrete in sub base or bases etc. complete all as specified and directed by Engineer - in - Charge

M&L for sand filling under floors, path or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.

M&L Machine pressed precast concrete interlocking paver blockwith grey cement and pigment any shape and size confirming to IS 15658 -2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick tiles, single layer on roof complete all as specified and directed by Engineer - in - Charge.

M&L 40mm thick brick tiles laid on mud mortar & joint grouted flush in CM (1:3) mixed with 5% of crude oil by weight of cement on mud pushka complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

M&L 20 mm thick Green/black marble machine cut as in skirting/dado and on shelves etc laid over 10 mm thick cement mortar 1:3 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing etc complete all as specified and directed by Engineer-in-charge.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge.

M & L for 20 mm thick machine cut kota stone slab flooring 20mm thick laid over and including 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engineer - in - Charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick square or rectangular area of each tile exc 0.6 sqm but n. exc 0.11 sqm in floor etc laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white cement mixed with pigment coloured cement to match the shade of tiles complete all as specified and directed by Engineer - in - Charge

M&L for Non skid coloured ceramic tiles 7 to 8mm thick square or rectangular area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floor etc laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white cement mixed with pigment coloured cement to match the shade of tiles complete all as specified and directed by Engineer - in - Charge

M&L for non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc. set & joined in cement slurry and pointed in coloured cement to match the shade of tile,includinguding 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for vitrified ceramic tiles 10 mm thick square or rectangular area of each tile exc 0.18 sqm but n. exc 0.36 sqm as infloor etc laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white cement mixed with pigment coloured cement to match the shade of tiles complete all as specified and directed by Engineer - in - Charge

M&L for glazed ceramic coloured tiles, interior grade (350x450)x7mm/ (350x250)x7mm thick as on vertical surfaces like dados or skirting laid over and including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L for vitrified ceramic tiles 10 mm thick square or rectangular area of each tile exc 0.18 sqm but n. exc 0.36 sqm as in skirting /dados etc laid over and including 10 mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white cement mixed with pigment coloured cement to match the shade of tiles complete all as specified and directed by Engineer - in - Charge

M&L for Non skid coloured ceramic tiles 7 to 8mm thick square or rectangular area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floor etc laid over and including 10 mm thick rendering in CM 1:3 and jointed in neat cement slurry and pointed in white cement mixed with pigment coloured cement to match the shade of tiles complete all as specified and directed by Engineer - in - Charge

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer - in - Charge

M&L for reinfocement cement concrete 1: 1/2:3 using 20mm graded aggregate as in chhajja, lintels etccomplete all as specified and directed by Engineer - in - Charge

M&L for form work to sides & soffits of suspended slab such as roof slabs, floor slabs, landings and similar work; n. exc. 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed by Engineer - in - Charge..

M&L TMT bars 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia using TMT bars. complete all as specified and directed by Engineer - in - Charge.

M & L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, as in stirrups, spacers and binders complete all as specified and directed by Engineer - in - Charge.

Taking down cement plasters of any des-cription including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

M&L 5 mm thick rendering in CM 1:3 on ceiling surfces including finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L 15 mm thick rendering in CM 1:6 on brick / concrete wall surfaces including finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L 15 mm thick rendering in CM 1:4 on brick / concrete wall surfaces including finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion, over a coat of chalk whiting as preparatory to distempering complete all as specified and directed by Engineer-in-Charge.

M&Lfor preparation of newly plastered surface of walls and applying two coats of cement based paint over a coat of white wash complete all as specified and directed by Engineer - in - Charge.

M & L for preparation of old decorated plastered surfaces of ceilings by brooming down or steel wire rushing,scrapping down smoke soot,moulds,moss and efforescent salts and trading oil and greasy spots etc and applying one coats of white wash complete all as specified and directed by Engineer - in - Charge.

M & L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire rushing,scrapping down smoke soot,moulds,moss and efforescent salts and trading oil and greasy spots etc and applying one coats of cement base paint complete all as specified and directed by Engineer - in - Charge.

M&L for complete removal of existing treatment of walls including prepration of surfaces with 3mm thick wall care putty and applying two coats of oil emulsion distemper, over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking down water tank of capacity exc. 500 Litre but n. exc. 1000 litre capacity complete all as specified and directed by Engineer - in - Charge.

S&F rotational moulded white colour polyethylene water storage tank 1000 litre capacity (Cylindrical vertical with closed top) hoisted and fixed in position with necessary fittings complete all as specified and directed by Engineer - in - Charge. (Note : PVC tanks shall be ISI marked, having two layres and white colour)

S&F rotational moulded white colour polyethylene water storage tank 500 litre capacity (Cylindrical vertical with closed top) hoisted and fixed in position with necessary fittings complete all as specified and directed by Engineer - in - Charge. (Note : PVC tanks shall be ISI marked, having two layres and white colour)

S & F ball brass valve 20mm dia high pressure with polythene float and fly nut, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair ball brass valve 20mm dia high pressure with polythene float and fly nut, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including fittings and accessories complete all as specified and directed by Engineer-in-charge.

S&F in repairs bands straps supports or stays for rainwater ventilating pipes or similar work including bolts confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-charge.

M&L for cutting holes into or through brick walls for intersting hold fast etc. built in cement mortar 1:3, n. exc. half brick wall and making good in cement concrete 1:2:4 type B-l complete all as specified and directed by Engineer - in - Charge.

S&F 110mm bore door type PVC (SWR) bends of any radius complete all as specified and directed by Engineer-in-Charge.

M&L 110 mm PVC (SWR) pipes single socked in any length with rubber ring joints, fixed to walls all as specified and directed by Engr-in-charge.

S&F in repair PVC valve-less, syphonic action type flushing cistern 10 litre capacity Low level with inlet ball valve float, brackets and PVC flush L- pipe of 32mm dia bore complete all as specified and directed by Engineer-in-Charge. .

S&F in repairs, sinks with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste coupling 40mm bore dia of discharge pipe , waste pipe plain 90cm long suitable for sink waste coupling, waste jali including making grooves , fixing properly or bedding in cement mortar to walll or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, vitreous china wash hand basin white, flat back size 550x400mm including brackets, waste coupling 32mm dia of brass Chromium plated, 15mm dia pillar tap of cast copper alloy with capstan head screwed down, high pressure, with or without letter "Hot or Cold" with long screwed shank and fly nuts, 32mm dia, waste pipe low or high density polyethelene of pressure rating 6 Kg/Sqm and PVC connection with PTMT nuts of 15mm dia and 450mm long cutting for and pinning in end of brackets or erecting stand etc. complete all as specified and directed by Engineer - in - Charge.

S&F in repairs waste coupling of PTMT (half or full threaded) 32 & 40 mm mm bore complete all as specified and directed by Engineer - in - Charge.

S&F in repairs waste coupling of stainless steel (half or full threaded) 32 & 40 mm mm bore complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, vitreous china wash down water closet pan (Pedstal pattern) white excluding flushing cistern & flush pipe but including seat cover complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, HDPE Lid cover sutiable for PVC water tank 500/1000 Ltr capacity complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, Brass CP mixer15 mm bore for mixing hot and cold water screwed down for iron pipe complete all as specified and directed by Engineer - in - Charge.

S&F in repairs, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engineer-in- charge.

S&F in repair, fancy type curtain rod 25 mm dia with brackets knobs rings (20mm c/c) etc complete all as specified and directed by engineer in charge.

Dismentling wall and ceiling boards of any thickness including cover fillets etc. complete all as specified and directed by Engineer - in - Charge.

S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by Engineer - in - Charge.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer - in - Charge.

S&F 10mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suiatably fixed with screws in flase ceiling grid made of aluminium/GI/MS as per specification complete all as specified and directed by Engineer - in - Charge.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed by Engineer - in - Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed by Engineer-in-charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engineer - in - Charge.

Holes drilled exc 25mm dia but n exc 40 mm (and countersunk, if required) complete all as specified and directed by Engineer - in - Charge.

S&F in repair, 10 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/GI/ Aluminium framework with screws complete all as specified and directed by Engineer - in - Charge.

S&F in repair, Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer - in - Charge.

S&F in repair, Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

PAREEK AND COMPANY

M/s Singla Trading Comapny