Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.9 LAccepted-AOC HOUSE NO 2 SATGAON MAIN ROAD NEAR BAILEY WATER FACTORY P O UDAYAN VIHAR DIST KAMRUP METRO GUWAHATI ASSAM 781171 | GUWAHATI | KAMRUP METRO | ASSAM | 781171 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹48.2 L+₹28,700 (0.60%)Rejected-Finance OIL INDIA LTD GATE NO 02 PO UDAYAN VIHAR GUWAHATI ASSAM | KAMRUP METRO | ASSAM | 781001 | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹48.6 L+₹76,520 (1.60%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹49.0 L+₹1.1 L (2.33%)Rejected-Finance 0 BINOVA NAGAR KAMRUP ASSAM 781018 UDYAM AS 03 0029196 | KAMRUP METRO | ASSAM | 781018 | L4 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Narangi
GE Narangi C/o 99 APO
CERTAIN MISC REPAIR TO MD ACCN OFFRS AND SINGLE LIVING ACCN OFFRS PB COLONY TARAPORE ENCLAVE KEY PERSON QTRS IN THE AOR OF AGE BR II UNDER GE NARANGI
2022_MES_560926_1
8765/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE Narangi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Narangi
₹99,800
Yes
30 Dec 2022
2 Nov 2022
30 Nov 2022
2 Nov 2022
28 Nov 2022
14 Nov 2022
Amount
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers, in roof covering, walls cladding etc, with grade of zinc coating 275 complete all as specified and as directed.
Refixing only galvanised corrugated mild steel sheeting as obtained from dismantling of old sheets here in before with two corrugation side lap, fixed with & including 'L' type or 'J' type or cranked hook bolts in roof covering, wall cladding etc., complete all as specified and as directed.
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fixing of hold fast or bed block complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.
S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.
Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in floor finished the surface even and smooth without using extra cement including concrete colour pigment on floors complete all as specified and as directed.
M&L for50mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for100mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L in repair 25mm thick 1:2:4 type B-0 precast cement concrete louvers and jallies ( measured solid) as directed including all mouldings but excluding frame set in CM 1 :6 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door/window frame complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
All as per item No. 22 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".
M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.
M&L for rendering 10mm thick bedding layer in cement mortar (1:4) on roof top, sunken floor surfaces in single layer mixed with WPC @ 2% by weight of cement for laying floor finish etc. complete all as specified and as directed. ( Note: WPC shall be measured and paid seperately under relevent item as Supply only).
M&L applying two coats @ 1.50Kg per square metre per coat minimum of two componenets of water proofing treatment on RCC roof/wall/sunken surfaces or plastered surfaces with Nito proof 100 as priming coat and Nito proof 120 or 100 as finishing coat of Forsoc or equivalent approved make
Supply only integral water proofing compound complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying onre coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer including 1mm thick ( average thickness) wall care putty complete all as specified and directed .
M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .
M&L for complete removal of existing treatment of wall surfaces, applying two coat of exterior weather proof paint over a coat of exterior primer complete all as specified and directed .
M&L for complete removal of existing treatment of wall surfaces, applying two coat of oil bound distemper over a coat of primer including sanding the surface till smooth finish is obtained complete all as specified and directed .
M&L for complete removal of existing treatment of wall surfaces, applying two coat of oil bound distemper over a coat of primer including 1mm thick ( average) thick wall care putty sanding the surface till smooth finish is obtained complete all as specified and directed .
M&L for complete removal of existing treatment of wall surfaces, applying two coat of cement base paint over a coat of primer including sanding the surface till smooth finish is obtained complete all as specified and directed .
M & L for preparing new surfaces of wood and wood based materials of any description exceeding 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 with mixing of WPC and surface finished fare and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.
Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section in frame work in any position complete all as specified and directed.
M&L second class hard wood in scantlings clean sawn timber in framed work complete all as specified and directed.
Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each builders hardware complete all as specified and directed.
Taking down shutter of any description n exc 1 Sqm each and refixing in same opening complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F 35mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.
S&F Anodised aluminium push pull type partly panelled and partly glazed door shutter ( single/double leaf) having top rail of section 85.00mmX44.45mmX2.00mm thick, bottom rail of section 85.00mmX44.45mmX2.00mm thick, door verticals of section 44.45mmX44.45mmX2.00mm thick and lock rail of section 85.00mmX44.45mmX2.00mm thick with alumnium anodised chowkat of section 63.50mmX33.10mmX2.50mm thick including necessary jointing cleats, glazing clips, rubber packing , snap beading, screws , handle and locking arrangement including 12mm thick prelaminated particle board interior grade prelaminated with decorative face lamination both sides on bottom panel and 5.50mm thick float glass tinted quality on top panel and including aluminium door closure fixed to door complete all as specified and directed.
S&Faluminium anodised sliding glazed window shutter ( double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodised aluminium shutter of section 40mmX20mmX1.10mm thick and window chowkat of section 92.00mmX29.50mmX1.20mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading , screws, handle, tower bolts and locking arrangements etc including 4mm thick sheet glass tinted quality on panel and stainless steel wirecloth or aluminium anodised wire cloth for mosquitto proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good disturbed surfaces complete all as specified and as directed.
S&F factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum, screw withdrawl strength of 1800N ( Face) and 900N ( Edge) , minimum compressive strength of 50N/sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed with SS butt hinge of required size with necessary full body threaded star headed counter sunk SS screws. ( SS buttt hinge and necessary SS screws shall be measured and paid seperately) .
S&F factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 18mm thick comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum, screw withdrawl strength of 1800N ( Face) and 900N ( Edge) , minimum compressive strength of 50N/sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed with SS butt hinge of required size with necessary full body threaded star headed counter sunk SS screws. ( SS buttt hinge and necessary SS screws shall be measured and paid seperately) .
S&F factory made single extruded WPC( Wood Polymer Composite) solid door/window/Ceosetory windows and other frames/chowkats of size 50X100mm comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) febricated with miter joints after applying PVC solvent cement and screwed with fulll body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200N ( Face) and 1100N ( Edge) , minimum compressive strength of 58N/sqmm modules of elasticity 900N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with MS hold fast/lugs/SS desh fasteners of required dia and length. ( MS hold fast/Lugs or SS dash fastener shall be measured and paid seperately) Note : For WPC solid door/window frame plus minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed.
S&F in repair 18/19mm thick block boards grade 2 quality interior grade commercial type fixed with screws to timber frame work as in cup boards and shelves complete all as specified and directed.
S&F steel window with side hung shutter glazed shutter ibncluding both side openable ( outsude glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.( Guard bar or square bar shall be measured and paid seperately).
S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .
S&F stainless steel butt hinges 100 mm long complete all as specified and as directed.
S&F stainless steel butt hinges 75 mm long complete all as specified and as directed.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm size extruded aluminium handles, febricated type, anodised complete all as specified and directed.
S&F 150mm size extruded aluminium handles, cast type, anodised complete all as specified and directed.
S&F 100 mm size aluminium alloy handles, cast type, anodised complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed
S&F in repairs mild steel PVC coated coloured 25mm dia drapery rod for curtains including decorative end holders and brackets ( wall to wall or flush to wall) for securing curtain rod complete all as specified and directed
S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repair harrison rails mild steel chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
S&F in repair powder coated bracket for 25mm dia curtain rod omplete all as specified and as directed.
S&F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
S&F in repair stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
M&L in repair for seccond class hard wood weather boarding , clean sawn, plain 19/20mm thick or feather edged 15/20mm thick and fixed with 30mm laps complete all as specified and as directed.
M&L in repair 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.
Taking down eaves gutter and rain water pipe ( any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. including cleaning and refixing or removal to store ( measured overall as fixed along the centre line over fittings and acessories complete all as specified and directed.
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed light coloured/printed ceramic tiles 300x200x7mm/350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.
M&L heavy duty parking tiles of size 300mmX300mmX10 to 12mm thick/ 400mmX400mmX10 to 12 mm thick of approved make jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. complete all as specified & as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade including 30mm thick sand cushioning and filling joints with sand complete all as specified & as directed.
M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.
M&L for 18 to 20 mm thick granite (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in white cement 1:2 using granite dust with admixture of pigment to match with the shade of granite work including rounding of exposed edges of granite over and including 15mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 20 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
M/L cutting chases , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc. and making good , cutting not exceeding 10 cm girth complete all as specified and directed.
S & F in repair 20 mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity upto 1000 litres and from mouth of circulating pipes and writing the date of cleaning on water tank with white paint complete all as specified and as directed.
S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, PTMT bib taps 15mm dia standard any colour screwed doen for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.
S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repair, 15mm dia stop valves stop cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type) complete all as specified and as directed.
S&F in repairs,grating doom 125m dia with waste hole of PTMT ( Minimum weight 40 gms) complete all as specified and as directed.
S&F in repairs,grating doom 100mm dia with waste hole of PTMT ( Minimum weight 25 gms) complete all as specified and as directed.
S & F in repairs, waste coupling of PTMT 40mm (half or full thread) complete ( minimum weight -60gms) all as specified and as directed.
S & F in repairs, waste coupling of PTMT 32mm (half or full thread) complete ( minimum weight -45gms) all as specified and as directed.
M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.
S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.
S&F in repair PVC waste pipe of size 40mm dia for sink complete all as specified and directed.
S&F in repair PVC waste pipe of size 32mm dia for wash hand basin complete all as specified and directed.
Disconnecting existing tanks, setting aside ( or lowering if required) for cleaning etc. and hoisting if required reconnecting and refixing in position, cleaning, and removing all scale and dirt etc from tanks and from mouth of circulating pipes of capacity upto 500 litres including writing the date of cleaning on water tank with white paint complete all as specified and as directed.
S & F in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.
S & F in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.
S&F in repair Vitreous china wash down one piece water closet pan ( EWC) Italian collection ( RENE STARWHITE) of size 59cmX 36cm X 71cm ( Pedestal pattern) complete series, white including vitreous china flushing cistern ( inbuilt with EWC) and plastic water closet seat white closed pattern with flat bottom, and cover mild steel chromium plated or aluminium hinging device including connection to drain and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. Make : Hindware Cat No. 92088 ( S-30).
S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed
S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.
S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.
S&F in repair 40mm dia spout medium grade 40 cm long fixed in top of sunken slabs including cutting holes to wall and making good with CM 1:2 complete all as specified & as directed.
S&F in repair glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directed Make Paryag Cat no. BEA-47 or equivalent as approved
S & F in repairs, chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete all as specified and as directed.
S & F in repairs, chromium plated ccentral hole basin mixer screwed down for iron pipe 15 mm bore and fixed complete all as specified and as directed.
S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.
S&F in repair chromium plated soap dish of approximate size 160x160x90mm embedded in wall complete all as specified & as directed.
S & F in repairs, health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.
S&F PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.
S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S & F in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,600mmX900mmX250mm fixed to wall with screws complete all as specified and as directed.
S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.
S&F 100mm dia cast iron spun Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.with oval access door.complete all as specified and directed.
S&F100mm dia cast iron spun bends (any radius) diminishing pieces or tapers.complete all as specified and directed.
S&F100mm dia cast iron spun bends (any radius) with oval access door diminishing pieces or tapers.complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.
S&F 75 mm dia PVC (SWR) bends of any radius with with duck foot or heel rest fitted with oval access door complete all as specified and directed.
S&F PVC ( SWR) branch piece, single ( single -Y) equal or unequal 110mm dia complete all as specified & directed.
S & F 110mm bore PVC ( SWR) junction, single (Single T) equal or unequal provided with accesss door complete all as specified and directed.
S & F 75mm bore PVC ( SWR) junction, single (Single T) equal or unequal provided with accesss door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F Cast iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed
S&F in repairs, 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.
S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.
S&F in repairs, cast iron ( sand cast) soil, waste, and vent pipes 100mm bore of any length with or without ears with cement joints complete all as specified and as directed.
S. R. TRADING
M/S M Ahmed and Co.
KAMAKHYA CONSTRUCTION & BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .