Namakkal City Municipal Corporation-Providing speed breakers, studs and thermoplastic in New bus stand at W2

Amount

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying Bituminous concrete to 40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications.

Providing and laying of hot applied thermoplastic compound 2.5mm thick.including reflectorising glass beads @ 250gms per sqm area,thickness of 2.5mm exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes etc..,complete as per MORTH specification No.803.

Providing and fixing reflective road studs of "category A' Raised Pavement markers made out of poly carbonate / methyl methecrylate / ABS moulded body and conforming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No. RW/NH. 33023/10/97-DO.III Dt. 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 sq.cm. on each side and the slope to the base shall be 35+/-5 degree. Each reflector shall have a CIL not less than values ete as directed by the engineer. The marker shall support a load of 13635 Kg. tested in accordance with ASTM D4280 and confirming to IRC 35-2015 guidelines and MORTH circular NO RW / NH .33023 /10/97-DO . III dt 11.06.97 and the length , height and width of the body shall not be less than 100mm, 15mm and 90mm and base of marker shall be flat within 1.3mm. The marker support a load of 13635 kg tested in accordance with ASTM D4280 and confirming to IRC 35-2015 guidelines and MORT&H specification 804 etc., complete

Providing and fixing of Retro Reflectorised Cautionary, Mandatory and Informatory signs (with or without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type IV standards of IRC 67-2012 and ASTM D 4956-09, Specification and fixed over 2mm thick Aluminium Sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild Steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.1m from the ground level to the b sheet shall consist of minimum coefficient of Retro - reflection as per Table 6.6 of IRC 67-2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years out door exposure report shall be obtained as per IRC 67:2012 (as per MORT&H specification No. 801) Retro Reflectorised Traffic Signs (with definition board)- Type IV (90 cm equilateral triangle and 60 cm circula Boards) 90 cm equilateral triangle (Speed Breakers symbol)

60 cm circular

Mookambika construction (BID ID -1294955)