PROVIDING AND FIXING OF COVERS FOR INSPECTION CHAMBERS /MANHOLES ON S W DRAIN / NALLA and MISC REPAIRS TO DRAINS AT PRABHAG SAMITTI B, IN PMC AREA. (FOR TWO YEARS).

Amount

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift upto 1.5m) By Mechanical Means

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.

Disposal of excvated material upto 5km lead

Hiring JCB With including driver tools and tackels,oil,lubricant etc complete.

Hiring of air compressor with breaker for breaking strom water drain slab,paradi, raft including driver tools and tackles,oil,lubricant etc.

Providing and fixing of cement concrete Kerb Stone of M-25 grade in white cement with colour of size: 500 mm width x 325 height x 165 mm thick (Half Batter, Bull Nose / Full Batter) manufactured in wet press vacuum dewatering technology plant /equivalent with face pimple finish for high visibility with excellent quality and finish and edges perfect and sharp. Including excavation in any soil except rock, laying a leveling course of M-15 grade RMC 100 mm thick, to required slope (inclusive of form work) jointing in C.M.1:2 proportion flush to concrete surface, any shade as directed by engineer. (Kerbstones shall be procured from MCGM registered agencies). NOTE: THIS ITEM SHOULD BE OPERATED ONLY AFTER SPECIFIC SANCTION OF DIR(E.S.& P.)

Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge(20 tonnes capacity) of various sizes.

540mm Dia 20T

560mm Dia 20T

Providing and fixing precast RCC Frame of size 1.15x1.15m made up of beam size of 150x150mm over SW Drain in M-30 grade of using design mix with minimum cement content as per IS 456 as per detailed design drawing or as directed including steel centering,compacting,curing and finishing uneven and honey combed surface with cement mortar 1:3 of sufficent minimum thickness to give a smooth and evn surface including providing and fixing steel reinforcement @60kg/m3.The item also includes necesary material like concrete to maintain line level of the frame.including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge etc Complete.

Providing and fixing precast RCC Frame of size 1.15x0.60m made up of beam size of 150x150mm over SW Drain in M-30 grade of using design mix with minimum cement content as per IS 456 as per detailed design drawing or as directed including steel centering,compacting,curing and finishing uneven and honey combed surface with cement mortar 1:3 of sufficent minimum thickness to give a smooth and evn surface including providing and fixing steel reinforcement @60kg/m3.The item also includes necesary material like concrete to maintain line level of the frame.including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge etc Complete.

Providing and fixing precast RCC Frame of size 1.15x0.45m made up of beam size of 150x150mm over SW Drain in M-30 grade of using design mix with minimum cement content as per IS 456 as per detailed design drawing or as directed including steel centering,compacting,curing and finishing uneven and honey combed surface with cement mortar 1:3 of sufficent minimum thickness to give a smooth and evn surface including providing and fixing steel reinforcement @60kg/m3.The item also includes necesary material like concrete to maintain line level of the frame.including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge etc Complete.

Providing and fixing precast RCC Frame of size 1.05x0.45m made up of beam size of 150x150mm over SW Drain in M-30 grade of using design mix with minimum cement content as per IS 456 as per detailed design drawing or as directed including steel centering,compacting,curing and finishing uneven and honey combed surface with cement mortar 1:3 of sufficent minimum thickness to give a smooth and evn surface including providing and fixing steel reinforcement @60kg/m3.The item also includes necesary material like concrete to maintain line level of the frame.including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge etc Complete.

Providing and fixing precast RCC Frame of size 0.75x0.45m made up of beam size of 150x150mm over SW Drain in M-30 grade of using design mix with minimum cement content as per IS 456 as per detailed design drawing or as directed including steel centering,compacting,curing and finishing uneven and honey combed surface with cement mortar 1:3 of sufficent minimum thickness to give a smooth and evn surface including providing and fixing steel reinforcement @60kg/m3.The item also includes necesary material like concrete to maintain line level of the frame.including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge etc Complete.

Providing and fixing precast RCC Frame of size 0.60x0.45m made up of beam size of 150x150mm over SW Drain in M-30 grade of using design mix with minimum cement content as per IS 456 as per detailed design drawing or as directed including steel centering,compacting,curing and finishing uneven and honey combed surface with cement mortar 1:3 of sufficent minimum thickness to give a smooth and evn surface including providing and fixing steel reinforcement @60kg/m3.The item also includes necesary material like concrete to maintain line level of the frame.including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge etc Complete.

Providing and fixing precast factory made RCC Covers of M-30 garde concrete of approved quality and make 75mm thick for S.W Drains and injection chambers including mild steel reincforcement including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge of various sizes.

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Skilled Labour

Providing and fixing diffrent sizes of RCC Cover and frame with Grating of approved brand extra heavy duty,medium duty and light duty confirming to relavent grade designation HD -Tons as per IS 1726:1991 including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge of various sizes.

Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frame of any size over inspection chamber etc. complete (Prior permission of S.E. is to be obtained before inclusion of this item in the estimate)

Circular 450 Dia HD 25T

Circular 560 Dia HD 25T

Circular 600 Dia HD 25T

Rectangular 450x600 HD 25T

Rectangular 450x900 HD 25T

Rectangular 600x900 HD 25T

Square 600x600 HD 25T

Square 900x900 HD 25T

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

Achintya Construction Company

M/S. PARSHWA CORPORATION