WBPWD/AE/KMCESD/NIQ-127/24-25

Amount

Dismantling the existing damaged/ deplorable E.I. work incl. wiring/cabling, surface/concealed MS box, different types of DBs etc. from its original position by Co's own tools & tackles by maintaining normalcy as far as possible as per direction of EIC

Distribution wiring:--- Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish a) Av. run 9 mtr

b) Av. run 10 mtr

c) Av. run 11 mtr

d) Av. run 12 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish a) On Board

Supplying and fixing 2+12 way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make-Legrand/LK/Schneider/ABB/Siemens)

Supplying and fixing 6 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/LK/Schneider/ABB/Siemens)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection (Make-Legrand/LK/Schneider/ABB/Siemens) , as to GS. A) 240 V, 40A DP

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make-Legrand/LK/ Schneider/ABB/Siemens) , as to GS. A) 6A - 32A SP MCB

b) 40A DP MCB

Plug & Sockets:--- Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Make-Anchor penta/ Havell's Reo) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make-Anchor penta/ Havell's Reo) on sheet metal switch board on wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as to GS.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required a) 2x22/0.3 ( 1.5 sqmm ) + 1x22/0.3 (1.5 sqmm) as ECC ( For Separate 5A Plug Point )

b) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

c) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

d) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Havells/Glostar/KEI) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required a) 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC

Finishing the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc. incl. supplying sockets, tapes etc of following as to GS. A) 2x2.5 sqmm

b) 2x4 sqmm + 1x2.5sqmm

c) 4x6 sqmm + 2x4 sqmm

Supply & fixing 250V control starter type OLP 30M, 11-21A range, starter with AC looad display (make-- ultratech/Electron) incl. S&F of 6 modukle moduler MS box and necy connection

Supply and Delivery 4' long Single LED tube fittings (Philips T.M.C 502 1 X T - LED 22W/Wipro WIO921208P/Havells Regal Batten/ Lighting Technology) complete with 1 no 18/20 Watt LED tube tube (PHILIPS - LEDTUBE 18W 2100 lm 865 T8 (ve) / Wipro LL13 - 181 - 65 SESL1 - G1 / Havells Titania Neo/ Lighting Technology)

Fixing only single/twin fluorescent light fittings suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp (125mmx125mm) as per G S

Fixing only single/twin fluorescent light fittings complete with all accessories directly on wall/ceiling with HW block and suitable size MS fastner,ceiling plate,nipples etc. as required as per GS

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length as per G S

S & D 230V, 80 watt,1420 RPM heavy duty exhaust fan (Make -- USHA,S.Ph TURBO Heavy duty,1400RPM,ISI Grey/ Orient Heavy duty/CG EXHD300-4-1) of following sizes 12" (300mm)

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) 12" (30 cm)

Fixing only 1200mm sweep ceiling fan complete with blades, canopy, fork, rubber bush, down rod (1', 14 SWG) etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per G.S.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. as per G.S.

S & F fan down rod (14 SWG) incl. necessary connection wire (2 x 1.5sqmm cu wire) and painting the down rod as per direction of EIC

S & F additional safety arrangement of ceiling fan by stranded GI stay safety wire of suitable gauge with one end fixed at RC fan clamp with special type socket/nut bolts thimble which throughly crimped with the stay wire and the wire passing through the down rod and the other end connected with armature spindle by its existing jum nut hole with 2 nos special jublee clamp arrangement (sample approved by AE & Concerned JE, PWD).The length of stay wire varies as per site situation & it is also considering any type of work required i.e enlarging the existing hole / making hole in down rod by special arrangement and also making arrangement by insulating & socketing two ends of stay safety wire etc to complete the job as per direction of EIC. S&F of new split pin, jum nut, blade screw, nut bolt & washer heavy duty etc. down length 4' to 8'. (The agency have to carry out the work by shifting the furnitures if required and as per site availability permission from the authority concerned, maintaining the normalcy regarding patient care services as far as practicable)

Fixing exhaust fan of following sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS a) 12" (30 cm)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20mm size

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 10 SWG

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Defect Libilities period for 01 year from the date of completion of work) (Rate should be quotated including all taxes and duties)

Sanjay Shaw (BID ID -5991109)

MOON LIGHT (BID ID -6080060)

A.K.ENTERPRISE (BID ID -6085426)