Construction of Community Toilet at Srinagan Ram Krishna Ashram within Lakshmipur Gram Panchayat under Chandrakona-I Panchayat Samity , fund- 15th CFC

Earth work in Excavation of foundation & trenches or drains of septic tank ,soak wells etc. in all sorts of soil (including mixed soil but excluding lateriate of sand stone) including removing spreading or stacking the spoils with in lead of 75 meter as directed. The item includes necessary trimming the sides of trenches,leveling dressing and ramming the bottom, bailing out water as required complete. a)Depth of Excavation not exceeding 1.5 metre.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. As directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand . (payment to be made measurement of finished quantity) (B) Do - by fine sand

Supplying and laying Polytheen Sheet (150gm/sq.m) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Ordinary cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground Floor as per relevant IS codes. a) Pakur varity

Ordinary cement concrete (Mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground Floor as per relevant IS codes. i) Pakur varity

Brick work with 1st clas bricks in cement mortar(1:6) (a) In foundation and plinth

Brick work with 1st class bricks in cement mortar (1:6) b) In super structure

125 mm thick Brick work with first class bricks in cement morter (1:4) in ground floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hadr wood planks of approved thickness with required bracing for concrete slabs , beams and columns , lintels curved or straight including fiting , fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation etc.

Hire and labour charges for shuttering with centering & necessary staging upto 4m using approved stout props &thick hard wood plants of approved thickness with required brassing for concreteslabs,beams,columns, intel or straight including fitting fixingand striking out after completion of work upto roof of G.F. 25mm-30mm wooden shuttering as per decision and direction of E.I.C.

Reinforcement for Reinforced Concrete work in all sorts of structure including distribution bars. Stirrups binder etc.including supply of rods,initial straightening and removal of loose rust (if necessary) cutting to requisite length,hooking and bending to correct shape placing in proper position and binding with the 16 gauge Black annealed wire at every intersection complete as per drawing and direction. a) For work in foundation, Plinth and Superstructure and roof of ground floor /upto 4m. (i) Tor steel / Mild Steel. (II)(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary. i) in ground floor (c) 10 mm thick (1:4) cement mortar

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary. i) in ground floor b) 15 mm thick (1:4) cement mortar

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary. i) in ground floor a) 20 mm thick (1:4) cement mortar

Neat cement punning about 1.5mm thk.in wall , dado, window, sills, floor , drain etc. NOTE : Cement 0.152 cu.m per 100sq.m.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Electrification $ Recarege

Incription plate of Sixe 3' X 2' with necessary letter writing