REPAIR / REPLACEMENT TO DOORS, WINDOWS, VENTILATORS, CUP BOARDS AND PERIODICAL SERVICE AND OTHER MISC WORK IN BILLET AREA UNDER GE (AF) SRINAGAR.

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge

Re-fixing shutters of any description retrived from item No 3 above in same opening, area exceeding 1 Sqm and not exceeding 2.00 sqm each, complete all as specified and as directed by Engineer-in-Charge

Resecuring or easing and adjusting without taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each, complete all as specified and as directed by Engineer-in-Charge

M&L for Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25 mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

M&L for Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F 35 mm thick, IInd class hard wood plain, framed, paneled shutters (two panel) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.

S&F 35 mm thick, 2 nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge.

S&F 30 mm thick, 2nd class hard wood, glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(b) complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in second class hardwood, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 mm thick 2nd class hardwood clean sawn wooden boards or planks of width n exc. 20 cm, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 2nd class hardwood Plain fillets square, rectangular or triangular in section of area exc 6 Sqcm and n.exc 13 Sqcm, clean sawn, secured with nails or brads, complete all as specified and directed by Engineer-in-Charge.

S&F 25 mm thick Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides, fixed with screws to timber framed work as in cup board shutters, shelves etc. all as specified and directed by Engineer-in-Charge.

Supply & paist 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete

Extra over item No 16 above for supply and fix 6 mm thick teak wood lipping, on exposed edge fixed with nails complete all as specified.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30 mm, complete all as specified and directed by Engineer-in-Charge.

S & F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plote and fixed with screw, complete all as specified and directed by Engineer-in-Charge.

S&F Butt hinges, medium weight, cold rolled mild steel 100 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Butt hinges, medium weight, cold rolled mild steel 100 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Butt hinges, medium weight, cold rolled mild steel 75 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Butt hinges, medium weight, cold rolled mild steel 75 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium, anodised, barrel tower bolts 150 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 100 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium, anodised, barrel tower bolts 100 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 150 mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium handles, cast type, anodised 150mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 100mm size, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium handles, cast type, anodised 100mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length fixed with screws/welding, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length fixed with screws/welding, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Floor door stopper of aluminium alloy body, double legged with rubber shoe fixed to door, Overall length of cover plate 100 mm all as specified and directed by Engineer-in-Charge

Supply and fixing factory made steel window box type using ERW hollow 'P' section comprising side hung double leaf shutters for and including wire gauged and glazed Skeleton shutter jointed internally with flat iron of size 40 mm x 4 mm, with grill of 8 mm square bars, fixed horizontally @ 10 cm c/c, hinges, handle, tower bolts, stops, hold fast etc. complete all as specified and directed. Note:- Wire gauge & Glazing will be measured & paid seperatly.

Supply and fixing factory made steel ventilator box type using ERW hollow 'P' section comprising top / bottom hung double leaf shutters for and including wire gauged and glazed Skeleton shutter jointed internally with flat iron of size 40 mm x 4 mm, with grill of 8 mm square bars, fixed horizontally @ 10 cm c/c, hinges, handle, tower bolts, stops, hold fast etc. complete all as specified and directed. Note:- Wire gauge & Glazing will be measured & paid seperatly.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F 03 mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 03 mm thick sheet glass, figured glass, pin head type and glazing with oil putty / wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for fixing of holdfasts, etc including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old painted wood and wooden base surfaces of any description over 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for Preparation of old painted steel surfaces of any description exc 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for repairing steel windows by adjusting and welding the hinges, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 150 mm size steel handles left / right for steel windows , complete all as specified and directed by Engineer-in-Charge.

S&F in repairs steel stays 300 mm length for steel windows, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Sheet glass 5 mm thick, ordinary quality and glazing with rubber neoprene packing and aluminium glazing clip, complete all as specified and directed by Engineer-in-Charge. Note:- Old rubber bead & old aluminium glazing clip retrived from demolition of glass shall be reused for fixing of new glass.

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

All as per item No 56 above here-in-before but except bricks. Note:- Old brick retrieved vide item No 55 above shall be reused.

Taking down cement plaster of any description on brick or stone masonary wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid seperately.

Supply only Liquid water proofing compound.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of Old decorated surfaces of ceiling including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts cleaning oil and geasy spots, trading oil, greasy spots etc and applying one coat of white wash complete all as specified and as directed.

M&L for Preparation of Old decorated surfaces of wall including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts cleaning oil and geasy spots, trading oil, greasy spots etc and applying one coat of white wash complete all as specified and as directed.

M&L for Preparation of Old decorated surfaces of wall including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts cleaning oil and geasy spots, trading oil, greasy spots etc and applying two coat of white wash complete all as specified and as directed.

Complete removal of exsting treatment from wall surface including pilister & cornice etc of any descreption including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts etc complete all as specified and as directed.

M&L for preparation of new plastered surfcae / surface obtained after complete removal of treatment and application of water based primer sutable for weather proof exterior emulsion paint, applied as per manufacturer instruction on wall surface including pilister & cornice etc of any descreption complete. Note:- This item will be executed over new plaster surface / surfcae obtained after complete removel of existing treatment.

M&L for application of two coats of exterior emulsion paint applied as per manufacturer instruction on primered surface of wall including pilister & cornice etc of any descreption complete. Note:- Application of primer will be measured & paid seperatly.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of cement base paint, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coat of cement base paint, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid seperatly

M&L for applying 3 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surafce even & smooth for reciving distemper / paint of any descreption all as specified & directed.

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying two coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of old decorated surfaces of ceiling including cornices etc by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified..

M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified.

M&L for 10 mm thick rendring / backing coat in cement mortar (1:4) to receive wall tiles, complete all as specified.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over screed bed.

All as per item No 82 above here-in-before but as in Skirting

M&L for coloured glazed ceramic tiles in vertical surfaces of size 600 x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

S&F 20 mm Stainless steel curtain rod with stainless steel bracket and satinless steel finils, fancy type as approved by GE, as in curtain rods including taking down the old curtains rods complete all as specified and directed by Engineer-In-Charge.

M&L for rewriting building No by base with one coat black synthetic enamel paint for dia not exc 300 mm and rewriting building Nos letters of figures (Block, Roman, Italic or Indian ) with one coat white synthetic enamel paint complete all as specified & directed. Note:- Height of each letter will 100 mm.

S&F Mild steel flat iron as in hold fast and similar work fixed to chowkhat complete all as specified and as directed by Engineer-In-Charge.

M&L for PCC 1:2:4, using 12.5mm graded aggregate for fixing of hold fast and similar works, complete all as specified and as directed by Engineer-In-Charge.

M/S FAROOQ AND SONS

M/S Abdul Ahad Rather

M/S LUCKY BUILDERS

NAJAR ENTERPRISES

M/S TARIQ AHMAD SHEIKH

M/S LATIF AHMAD MIR

M/S MAQBOOL BHAT & SONS

M/S M B ENTERPRISES