Fire Fighting System for Construction of New Judicial Court Complex (Tower of Justice) at Gurugram. (RECALL)

Amount

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.2850 lpm at 88 m Head including required sizes of XLPE armoured aluminum conductor power cable of 1.1 KV grade , perforated cable trays, GI strips, GI earth plates, GI wire, GI pipe, Bras compression glands and copper lugs to complete the system as required.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2850 lpm at 88 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.180 lpm at 88 m Head

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35 m Head

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (i) 25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia (wall thicknes 6.3 mm)

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (i) 200 mm dia (wall thicknes 6.3 mm)

(ii) 150 mm. Dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 150 mm dia

200 mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :(i) 150 mm dia

200 mm dia

Providing, installation, testing and commissioning of Y-strainer of CI body fabricated out of stainless steel 1.6 mm thick stain, Grade 304, sheet with 3 mm dia holes with stainless steel flange. (i) 150mm

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : 'Gun Metal

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun Metal

Providing and fixing standard firemans axe with heavy rubber handle.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (i) 4 way - 150 mm dia M.S. Pipe

3 way - 150 mm dia M.S. Pipe

Providing and fixing weather proof cabinet of size not less than 0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required.

Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications. a) CO2 gas nozzle type - 9 Litre capacity (IS:15683).

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683).

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683).

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : (i) Pendant sprinkler

Upright sprinkler

Horizontal side wall sprinkler

Concealed sprinkler

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150 mm dia

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing and fixing of pressure switch in M.S. pipe line including connection etc as required

Providing and fixing of flow switch in following sizes in M.S. pipe line including connection etc as required (i) 150 mm dia

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure ofc875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. (i) 700mm

Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. (i) 50 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.

Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.

Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as base chemical, covered under UV stablized coating and of appropriate size (Glo-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts as diercted by Engineer-in-charge

Supply, installation, testing & commissioning of following minimum capacity cylinder UL listed / CCOE/PESO Approved and confirming to IS7285 & IS 15493 and upto date amendment , suitable for filling HFC227ea gas for fire fighting system complete with Valve & warning sign stickers , including suitable clamp to fix the wall etc complete as reqd. 140 Liters cylinder

Supplying,filling,testing and commissioning of FM200(HFC 227ea, known chemically as Heptafluoropropane),gas in the above mentioned each cylinders and quantity to be alculated as per the computer programe/direction Engineer in charge etc complete as required.

Supplying, laying, testing and commissioning of 'Master Cylinder Kit complete comprises of Electric actuator, pneumatic actuator, check valves, pressure gauge, pressure switch, discharge pressure switch, complete with tees, elbow etc. as required

Supplying, laying, testing and commissioning of Manual Actuator Assembly complete with liver to activate the system manually.

Supplying, laying, testing and commissioning of 'Wire Braided Flexible Rubber Hose with Elbow and connectors complete assembly to Connect FM- 200(HFC 227ea Cylinder Assembly Discharge outlet with Discharge Pipe or Discharge Manifold.

Supplying, laying, testing and commissioning of Warning Signs and Plates for Inside Room and Outside Room application.

Supplying, laying, testing and commissioning of 'Discharge Nozzles to Discharge HFC227ea Gas in the Hazard Area as hydraulic calculation and flow rate required in 180 Deg/360 Deg Discharge Pattern.

Supplying, laying, testing and commissioning of Cylinder Bracket

Discharge Pipe with Support and Fittings, CS Seamless to ASTM A-106 Schedule 40. of sizes 100mm for main header and 40mm, 50mm , 65mm & 80mm for branches as required to complete the system.

Providing and fixing of Metal Fire door from ISO 9001:2015 certified Manufacturer . The door must have been manufactured with galvanised - GI sheet of GPSP Grade as per IS 277. All Fire doors must satisfy the requirement of latest NBC 2016 Part 4 for Fire & Life Safety guidelines for 120 minutes Fire Rating with minimum 20 minutes Insulation properties along with its Stability & Integrity for 120 minutes. The Prototype sample of the door must carry a prior test evidence as per IS 3614 part-2 / BS 476 Part 20 & 22 . The manufacturer must submit the copy of test evidence prior to start of production .The offered test certificate should either carries it's Validity or certificate must not be older than 5 years from CBRI / NABL Accreditated Lab i.e Spectro / International Lab i.e Exova / TBW etc . All doors should be finished with Powder coating in desired regular RAL Shades. Door frame shall be Single rebate profile of section 100 x 57 mm made out of 1.20mm thick galvanised steel sheet with a factory pre-punched groove so as to accomodate Fire & smoke seal size 10x4mm . Frames should be butt jointed and field assembled with bolting system for proper strength .Frames should be provided with back plate for anchor fasteners (payable extra ) for installation on a finished plastered wall opening. Door leaf should be minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 0.8mm (22 guage) thick galvanised steel sheet. The door should be provided with reinforcement pads to receiving appropriate Hardwares of Becker Fire Solutions or Equivalent make. The Shutter shall be filled with proprietary infill material . For Double leaf doors; astragal has to be provided on meeting stile for both active and inactive leaf. Vision panels wherever required should be of 120 minutes fire rating and should be of non-wired type. All hardwares , Fasteners and FR Glass shall be payable in Extra item. Door with Panic bar & Vision Glass

Supply, Installation, Testing and Commisioning of 2hr. Fire rated Glazed fire doors - Powder Quoted FinishSupply of Glazed fire rated doors tested as per IS 3614 Part -2 & BS 476 part-20 & part-22 for stability and integrity. The framing is made out of Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested earlier at CBRI against Test Schedule FR/0253 for maximum rating of 2hrs tested with 11 mm thick Fire rated Glass Panels Contraflam Door Lite fire of Saint-Gobain make . Doors should be finished in Thermosetting Powder Coating desired RAL Shades. Manufacturer test certificate shall cover doors both single & double leaf doors and Hardwares should be Becker Fire Solutions or Equivalent which passes European certificate "CE" of conformity / UL with required fire ratings. Any deviation in specification and sheet thickness other than what is mentioned in the test certificates are not Permissible. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Navair International Ltd or equivalent subject to Architect’s approval. And should be ISO Certified company.Door frame shall be double rebate profile of minimum size 143mm X 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. NDRF 143x57 Frames shall be Butt jointed and field assembled with self bolted. The frames should be finished with Thermosetting Powder Coating in desired RAL Shade. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. All doors and frames shall be finished with Powder coating in desired Shades. Door leaf shall be minimum 46mm thick double skin box type door shutter framing with Top Rail , Vertical Styles of size 100x46mm Bottom Rail 200x46mm made out of 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be proprietary infill treated with Viper FRS 881 LH. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers or any other Hardware as per site requirement . The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a beeding from inside. The Fire rated Glass should be Saintgobin Contraflam Door Lite 11 mm clear 120 min fire rated (E120), Non Wired Toughened, interlatered glass having a sound reduction properties of >37dB, LT of 86% and compliant to class 2(B)2 category of Impact Resistance as per EN 12600 standard from Saint Gobain. 2 Hrs Glazed fire Door DG2: 3800x2100mm: Double door with both side fix Partition with Lock and Handle Lobby Door

Supply, Installation, Testing and Commisioning of FIXTURES FOR DOORS (Becker /Dorma/ GEZE) Supply and fixing of 5 mm thick Clear non wired Vision Glass of Size 300 x 300 mm of UL Labeled Saint gobain make

SS Ball Bearing Hinges of size 100 x 75 x 3mm complete with SS Screws of Dorma 3090F /BB1953 Becker F.S -MS Make ( 4 Nos per panel ) (Required For All Doors)

Panic Bar Double leaf panic exit devices PHCR 1000 DORMA/SBL995 Becker F.S. Make . (Required For Fire Staircase Location Doors Only)

DORMA PHCRT 2905/011KE Becker F.S. Make Panic Trim For Operation From The Other Side Of The Panic Bar. (Required For Fire Staircase Location Doors Only)

Mortise Dead Lock with both side key operation Cylinder Dorma xlc series/ DL7260K Becker fs make

Pull handle 300mm Long SS 304 Finish Dorma TGDI / Becker fs make

Door Closers of Dorma TS72 / BLC-0604 Becker F.S Make. (Required For All Fire Doors Except Shaft Door)

Stainless Steel 304 grade 300mm Long Concealed Flush Bolt of DORMA /Dorset Make with necessary screws as required.

anchor fastners of HILTI / FISHER/ Equvalent of maximum 80mm length.

Supply of Ceramic Tape for fixing fire glass

Providing masonry enclosure (valve chamber for external sluice valves) of internal dimensions 1 mtr. length x 1mtr. width x 1.2 mtr. depth with 230 mm thick brick work in cement mortar with 1:2:4 (one cement : 2 coarse sand :4 coarse aggregate of 20mm nominal size ) MS cover made out of MS chequered plate of thickness 10 mm including necessary excavation, refilling and removal of the surplus soil, plastering etc. as per specification complete as required with Floor work C.C.