Construction of 600 m Boundary Wall at Fertichem Land located at Bonda, Narengi, Kmarup(M), Assam

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footing of columns steps, septic tanks etc. including refilling (return filling) the quantity as necessary in return filling after completion of work, filling dressing, watering and ramming etc. and removal of the surplus earth with all lead and lifts as directed and specified. including refilling the quantity as required for completion, ramming etc. and removal of surplus earth with all lead lifts as directed and specified. Up to a depth of 2m below the existing Ground Level (a) In ordinary Soil

Providing brick soling in foundation and under floor with Stone/best quality picked Jhama bricks, Sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (b) Brick on flat soling

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed including dewatering if necessary and curing complete. (c) In Proportion 1:3:6

Providing and laying plain/ reinforced cement concrete works in proportion 1:1.5:3 including dewatering if necessary and curing complete but excluding the cost of form work and reinforcement. (a) In substructure up to P.L. foundation, footing, columns with base tie and plinth beam etc.

Providing and laying plain/ reinforced cement concrete works in proportion 1:1.5:3 including dewatering if necessary and curing complete but excluding the cost of form work and reinforcement (b) In superstructure from P.L. up to F.F.L.

112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed. (a) In Cement mortar 1:4

Brick work in cement mortar 1:4 with 1st class brick including raking out joints and curing complete up to plinth level.

Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (a) Random Rubble Masonry

providing formwork of ordinary timber planking using 25mm thick plank including centering, shuttering and propping etc. and removal the same using 25mm thick plank. (a) in column, footing in sub-structure

providing formwork of ordinary timber planking using 25mm thick plank including centering, shuttering and propping etc. and removal the same using 25mm thick plank. (b) in beam etc. above plinth level

providing formwork of ordinary timber planking using 25mm thick plank including centering, shuttering and propping etc. and removal the same using 25mm thick plank. (c) in column above sub-structure

15mm thick cement plaster in single coat finished even and smooth including curing complete as directed in cement mortar 1:3 On rough Side

15mm thick cement plaster in single coat finished even and smooth including curing complete as directed in cement mortar 1:3 On Fair Side

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S. code for R.C.C. work/R.B walling including straightening cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete up to 1st floor level.(a) TMT - Corrosion resistant Steel (Fe-500) reinforcement bar.(i) TATA/SAIL

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S. code for R.C.C. work/R.B walling including straightening cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete up to 1st floor level.(b) ISI approved M.S. Rod

Structural steel work in single sections including cutting, hoisting, fixing in position and supplying a priming coast of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.(a) In M.S. angles ,channels, Tees etc.

Providing barbed wire fencing on the top of newly constructed boundary wall with 7 (seven) strands of barbed wire 12 S.W.G. x 2 piles x 4 points at 75 mm apart including supplying, fitting and fixing with galvanised staples 38mm x 38mm x 3mm sizes with newly constructed posts of the fencing as directed.

Balin Deka

Rupam Chakraborty

NAYANJYOTI DEKA

MS LILI ENTERPRISE

MS R & D INFRA