Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹5.7 L+₹99,973 (21.3%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹7.7 L+₹3.0 L (63.4%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹8.0 L+₹3.3 L (70.0%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
23 Jan 2024, 6:00 pmClosed
AGE (I) AF MEMAURA
AGE (I) AF MEMAURA
REPAIR AND MAINT OF FENCING GATE DRAIN AND FOOTPATH AT VARIOUS LOCATIONS AT AF STN MEMAURA
2024_MES_635310_1
8332/E8
Open Tender
Civil Works
Works
183 days
AGE (I) AF MEMAURA
AS PER NIT
8 documents required · 8 mandatory
₹500
AGE (I) AF MEMAURA
₹18,000
Yes
2 Apr 2024
2 Jan 2024
25 Jan 2024
2 Jan 2024
23 Jan 2024
9 Jan 2024
Amount
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches,pillars etc. comlete all as specified and directed.
M&L brick work with sub class ‘B’ straight or curved on plan exc 6m mean radius built in cement mortar complete 1:4complete all as specified and directed.
Taking down of cement plaster inculding wall finishes in any description on brick or stone wall etc. Including hacking out joints for key scrubbing down with water etc. Complete all as specified and directed
M&L 15mm thick rendering in CM 1:6 on other than fair faces of bricks, finished even & smooth without using extra cement complete all as specified and as directed.
M&L 15mm thick rendering in CM 1:4 on fair faces of bricks, finished even & smooth without using extra cement including mixing WPC complete all as specified and as directed by the Engr-in-Charge. (Note : WPC will be measured and paid separetely)
Supply only Liquid water proofing compound complete all as specified and directed
M&L 5mm thick rendering in CM 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and as directed.
M&L for Preparation of newly plastered surface on wall and applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed
M&L for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed
M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings exc. 15 Cm thickness but above ground floor (above ground level) including floor finishes complete all as specified and directed
M & L for 100 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and directed
M&L for 75mm thick Cement concrete type B 2, 1:2:4 (using 40 mm graded stone aggregate) in sub base of flooring,mass filining and complete all as specified and directed
M&L Machine pressed precast concrete interlocking paver block, coloured reflective type rubber mould any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, complete all as specifed and directed.
M&L Machine pressed precast concrete interlocking paver block ,coloured reflective type rubber mould any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specifed and directed.
M&L for Sand filling under floors, spread, leveled and rammed including watering and consolidation complete all as specifed and directed.
Supply only Chain link MS galvanised fencing, size of aperture and dia of wire of any size or type, complete all as specified and directed.(Note : Fixing charges shall be measured and paid seperately)
Dismantling fencing wire mesh any type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed
S&F stretch and fix concertina coil 600mm dia in stress position hot deep galvanised steel wire coated with CLR anti corrosive paints making diamond shape with the help of dove tail clips(18SWG), the concertina coil is to be fixed with barbed wire at point where coil touched the bottom barbed wire with the help of lug rings (24SWG) including all fittings like fastenerclips, steel lug ringd etc to be fixed at different height complete all as specified and directed by Engg-in- charge. Note:(i) Stretch length of each coil shall be 6 mtr. (ii) weight of each coil shall not be less than 9kg.
S&F 0.5mm thick zinc coating of width 14mm razor wire medium barb design, hot dip galvanised steel wire coated with CLR anti corrosive paint fixed on swan neck angle iron complete all as specified and directed. weight of wire shall not be less than 1kg/10RM
Supply only 10mm round bar as in stiffner to hold the chain link fencing fixed to angle iron post by binding wire or staple pins or by welding as directed, confirming to FE-410-W(Gde E-250) quality A complete all as specified and directed.
Demolition and breaking up 300mm bore drain pipes, (RCC/ SWG/CI etc) jointed in cement mortar and taking out of trenches or floors, including connections and fittings complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concret using extra cement including forms, moulds, mitred/stopped ends etc complete all as specifed and directed.
M & L concrete bed to 300 mm bore drain pipe including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate complete all as specifed and directed.
M & L 300mm bore dia Reinforced Concrete Pipe, class NP3, laid and jointed complete with collars etc complete all as specifed and directed.
Dismantling wrought iron or mild steel work of any description any size complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed trus etc. complete all as specified and directed.
S& F Steel rolling shutters,thickness of laths 1.25 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer,erected in position as indicated, complete: push pull or manual type complete all as specified and directed.
S&F Safety lever lock mild steel with 4 lever for rolling shutters complete all as specified and directed.
S&F Ball bearing for rolling shutter, complete all as specified and directed
S&F 1.00 mm thick mild steel pain black sheeting welded to steel gates frame and similar work cut to size, holes punched including round headed screws with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angles etc complete all as specified and as required at site by Engr-in-Charge
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Gde Fe 410-0W (gde E-250) quality 'A' complete all as specifed and directed.
S&F in repairs Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated ) Fe-290 Gde E-165 complete all as specified and directed
M&L applying two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed
Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 12cm and not exceeding 20cm long and dia of bolt etc complete all as specified and directed
Running Welding in repairs exc 6mm but not exceed 9mm complete all as specified and as directed
Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
m/s pal associates
M/s R D Enterprises
M/s Shri krishna Constrcutions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .