new construction work from Mahua Kheda Road via Nagla Khamani Mode to Nagla Kashyap Pachai.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material. I/C cost of material, labour, T&P and all Taxes but Excluding GST

W B M Grade-2 Providing Laying Spreading and Compacting Stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 2 as per Technical Clause 405(2) I/C cost of material, labour, T&P and all Taxes but Excluding GST

WBM Grading 3 (using Graded Metal) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification includingspreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Primer Coat :- Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm using mechincal means as per technical specification Clause 502 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Tack Coat :- Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. I/C cost of material, labour, T&P and all Taxes but Excluding GST

20mm thick Open-Graded Premix Carpet using Bituminous Binder :- 20mm thick Open-Graded Premix Carpet using Bituminous (VG-10) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Seal Coat:- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Brick edging on both side of the road of M-150 bricks 8cm. (3") wide and 12cm (4½") deep laid with mud mortar including all labour and supply of brick finished to required template & ramming the excavated earth as directed by the Engineer-In-Charge. SOR SI No. 765 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Water Bound Macadam Sub-base/Base W B M Grade-1 Providing Laying Spreading and Compacting Brick Bats of O.B.B. / 150 B.B. of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 1 as per Technical Clause 404. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600,1202&1203. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supply, laying and fixing of 350mm Dia NP3 class hume pipes in proper position in culvert. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supply, laying and fixing of 600mm Dia NP3 class hume pipes in proper position in culvert. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification clauses 613 & 1204 I/C cost of material, labour, T&P and all Taxes but Excluding GST

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specification Clause 1915. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Ordinary kilometer stone (precast) Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Complete as per Direction Engineer in Charge I/C cost of material, labour, T&P and all Taxes but Excluding GST

Hectometer stone (precast) Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Complete as per Direction Engineer in Charge I/C cost of material, labour, T&P and all Taxes but Excluding GST

Retro Reflectorised Signs (Stainless steel Frame and Post with both side sings) Supply & fixing of reflective sign board (both side) of size 1.50×1.20 m retro reflective sheeting of HIP grade type-IV, the board shall be fixed on 50mm SS 304 grade pipe and reflective sheet on 4 mm thick, ACM sheet of standard make as per MORTH specification. The Board shall be fixed using 2 man post 45×45×60 cm cement concrete foundation. The stainless steel joint welding of SS pipe work shall be band and grinder property including buffing so an 10 give uniform shining at wedded joints. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal. adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MORTH specification No 801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender. As per SOR Ch. 6 Item No. 26 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Maintenance Charges for Bituminous Road Part Maintenance Charge including repair of painted surface, earthwork on patri etc complete as per direction of E.I. for the period of five years from the actual date of completion of work. For First Year @ Zeero %

Maintenance Same as Item No. 22 but for Second Year 0.75% of cost of total executed Work

Maintenance Same as Item No. 22 but for Third Year 1.50% of cost of total executed Work

Maintenance Same as Item No. 22 but for Fourth Year 2.25% of cost of total executed Work

Maintenance Same as Item No. 22 but for Fifth Year 3.00% of cost of total executed Work

Please Enable Macros to View BoQ information