SPL REPAIR TO BLOCK A, B AND C AT CHANKAYA BAGH UNDER GE NEW DELHI

Amount

Taking up or down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal to store complete in all respect as specified

Taking up or down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal to store complete in all respect as specified

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

S & F 20 mm dia Brass Elbow

S & F Union 16 / 20 mm

S & F 20 mm dia Brass Tee

Dismantling 100mm/75mm dia bore cast iron soil, waste and vent pipes including fitings by burning out lead joints etc

S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints, laid in trenches or in floors for 110mm bore.

S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints fixed to walls for 75mm bore.

S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints, laid in trenches or in floors for 75mm bore.

S&F in repairs Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 110mm bore.

S&F in repairs Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 75mm bore.

S&F in repairs Cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches Yor T for 110mm bore.

S&F in repairs Cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches Yor T for 75mm bore.

S&F in repairs Cast iron vent cowl 75mm

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes 5 mm thick single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius.

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

S&F in repairs 20mm bore gun matel globe or with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified

S&F 40mm dia high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off the shutter from the frame) all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) all as specified.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp including 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut including 0.45mm nominal dia of SS wire mesh and average width of aperature 1.18mm complete, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp including 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut including 0.45mm nominal dia of SS wire mesh and average width of aperature 1.18mm complete, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Windwo shall have provision for installation of window AC/Desert Cooler and provision of windwo glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone, complete all as specified and directed by Engr-in-charge.

S&F aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded center mullion size 40mmx65mm partly glazed/ gauzed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading. screws, including 0.45mm nominal dia of SS wire mesh and average width of aperature 1.18mm, including 3mm clear glass both side EPDM rubber gasket etc. provision for fixing the exhaust fan complete all as specified and as directed.

S&F for factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows and other frames/chowkat of size 125mmx65 mm comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame dencity of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete as per direction of Engr in charge.Note : For WPC solid door /windows frames, minus5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. Make- Alstone/ Yashpoly/ Century.

S&F for factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows and other frames/chowkat of size 100mmx50 mm comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame dencity of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete as per direction of Engr in charge.Note : For WPC solid door /windows frames, minus5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. Make- Rajshree/ Yashpoly/ Century

Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19mmx6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings." Note: fixture /fittings shall be measured and paid under relevant items. Make- Alstone/ Yashpoly/ Century

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as spd and directed. Make- Alstone/ Yashpoly/ Century

Supply and fixing WPC Cup Board made of 18 mm thick (solid WPC sheet) (Plus / minus 0.7) celuka WPC ply complete for hold of shelf / partition and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partition / wall side to be lipped with 18 mm x 1 mm thick WPC sheet of density 600 Kg /cbm manufactured by as ISO -9000 certified company , using solvent cement etc.( including all necessary Aluminium hardware fitting i.e Piano hinge , 4 handles, ball catchers including locking arrangement in each Cup board including dismantling of existing complete in all respect as specified and directed. (measurement should be taken external face only i.e. length and breadth) Make: Rajshree, Ecocell, Giza

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 200 mm Stainless steel barrel tower bolts of extruded section

S&F 150 mm Stainless steel handles, fabricated type., anodised

S&F SS Butt hinges in 100 mm Size, heavy weight, cold rolled Stainless steel, and fixed

Supply and fixed Floor door stopper 140mm long of stainless steel and tongue, anodised with hard drawn steel spring,

S & F 300 mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed all as specified.

S&F angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. Make- Jaquar- CAT Part No OPP-CHR-15053PM , Cera F2002201 or Equivelant in kohler

S&F chromium plated brass two way bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed. Make- Jaquar- CAT Part No CON-CHR-041KN , Cera F 2002163 or Equivelant in kohler

Supply and fixed in repair 15mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar- CAT Part No CQT-CHR-23167B,Cera F2002461 or Equivelant in kohler

Supply and fixed in repair 32mm bore dia CP finish copper alloy bottle trap heavy complete in all respect as specified and directed by Engr-in-Charge.

S&F in repairs chromium plated AVS health faucet Jet spary for water closet including 15mm bore PVC connecting pipe 1.2m long with check nut and washers all as specified .(Make : ZIM/PARKO/JAGUAR/SEIKO)

Supply and fixed in repairs 600 mm long C P finish CP Towel Rail D type complete in all respect as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash hand basin counter/table top type of size 495mmX395mmx150mm in 18 mm thick granite (of any type) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone, including 32mm bore dia CP waste coupling, waste pipe and all reuired fittings complete in all respect as specified and directed. Make: Jaquar- CAT Part No JDS-WHT-25909, Cera CAT Part No S2020163 or Equivelant in Kohler.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting, bowl size 410mmx330mmx160mm.

S & F in repairs PVC connections 15mm size with PTMT steel nuts of length 450mm

S&F in repair CP Wall mixer (wall mounted model ) 2-1 system with provision for overhead shower complete with 115mm long pipe connecting legs and flanges. Over head shower 105mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubbit cleaning system Code Make- Jaquar- CAT Part No CQT-CHR-23273UPR, Cera F-2002401 or Equivelant in kohler

S&F in repair Brass mortice lock vertical type size 100mm & 4 lever including escutchon plate and two no of keys fixed as in repairs complete all as specified

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed MAKE : COMMANDER/PRAYAG/JINDAL

S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as directed

Supply and fixed peg set of 6 fixed with rawal plug

S & F Stainless steel Double Soap Dish with tumber holder

S & F glass made wall mounted (removable bottle) liquid Soap Dispenser

S&F in repairs stainless steel 20 mm dia 18 gauge pipe of required length for curtain rods including side brackets and bulbs complete all as directed

S & F Glass Shelf assembly Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long

S&F corner shelf (set of 03) 200mm to 300mm size 5mm thick toughened glass

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

M& L for Green Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and including cement mortar (1:4), 20mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types

M& L for Green Marble work 16 to 18mm thick (table rubbed and polished) in riser of steps and including cement mortar (1:4), 10mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L Non skid joint less coloured DGVT matt finished tiles 8 to 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm(600x600mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

M & L Non skid joint less coloured SGVT tiles 10mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.74 sqm (1200x600mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

Ditto all as per item no 65 but in skirting only ditto

M & L Glazed vitrified tiles in vertical surface 600x300x 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:3 on wall complete in all respect as specified.

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all other saftey precautions as in Chajjas RCC water tanks kitchen slabs etc. complete all as specified and directed.

Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in slab supported on walls, beams & columns in floors, roofs

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping

M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but not exc 10 cm.

S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.

All as item no 72 above but 6mm to 8mm dia -ditto-.

S&F Framed work rolled section as in framing compound girder staging for water tank,cooler stand as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Incl making connection for inlet & outlet as specified & directed Engr-in-Charge and including dismantling of existing water tanks any type.

S & F in repairs ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia and fixed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified.

M&L Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc all as specified

M&L 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

M&L for 15 mm thick rendering plaster on fair or other than faces of brick work or concrete surfaces in cement mortar 1:6 and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint using roller brush (APEX ULTIMA or equivalent) over one coat of primer and over incl one coat of wall care putty 1.00mm thick minimum all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick wall care putty complete all as specified and directed.

S & F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as directed by EIC

M&L 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. (SBR latex shall be measured and paid separately)

M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of wall care putty 1.50mm thick complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of Exterior Emulsion paint (APEX ULTIMA or equivalent) using roller brush over one coat of primer and over incl one coat of wall care putty1.50mm thick all as specified and directed.

M&L two coat of synthetic enamelled paint over a coat of primer in any approved pattern and colour including preparation of New surfaces of wood exceeding 10cm width or grith not other wise provided

M&L preparation of old steel and iron surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly) Note :- Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to Four storey building.

S & F in repairs Exhaust fan louvers 230/300 mm size, iron including taking out old louvers up to fourth floor complete all as specified.

supply only Liquid water proofing compound

S & F in repair Vitreous China wash down water closet pan with seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including sheet cover

S and F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern.

18/19 mm thick solid WPC board, as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed.

S&F in Repair Kitchen cabinets made out of WPC sheet board 19mm thick including making drawers, partitions, shelves and WPC board on all sides with following specifications and as directed by Engineer-in-charge:-(a) 19mm thick WPC solid flush board with 5mm thick pre-laminated sheet fixed on one side, as kitchen cabinet. (b) Frame of size 50mmx47mm. (c) Shutters having piano hinges and brass handle 75mm long No for each shutter. (d) Bottom back and sides of cabinet covered with 19mm thick WPC board with 5mm thick pre-laminated sheet fixed on one side. (e) Drawers having brass handle 75mm long and two long sliding rails for each drawers with magnatic catcher as required. (f) Cabinet must have one drawers supported of sliding rails. (g) Size of each cabinet shall not be exceeding 0.9 M x 0.75 M and 0.60 M depth. (h) Measurement will be considered only for front face i.e. length & height & depth 0.50m. (j) SS jali racks mounted on drawer chanel Note: Measurement for purpose of payment shall be made on external visible face for width x height (considering frame).

Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick as in padding finished even and smooth witout using extra cement

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm

M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane.

M&L for non skid roof tiles with cooling properties of size 300x300 mm and 8-10 mm thick with solar reflective index (SRI) value upto 98%. Make OreientBell / Somany/ Kajaria Cat Part No. Orient Cool Tiles(EC) Bianco or equivalent including screed bed of 15mm thick cement mortar 1:4 all as specified and directed.

S&F in repair SS night latch with suitable stainless steel chain of size 250 to 300mm long including plate and fixed as in repairs complete all as specified.

Note :- Removing building materials /old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 25 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of minimum thickness 1mm and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following : Make : Polycab/Havells/RR KABEL

One light/fan/exhaust point controlled by one no, one way 5 Amp switch.

One light point controlled by two way 5 Amp switches

One bell/buzzer point controlled by one bell push complete all as specified and directed.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

All as per item No. 108.00 here in before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for AC & Geyser points.

Note for item No 108 & 109:- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.

S&F modular Switch 6 amps, 230 vots, single pole, one way (ISI marked) with IP 20 rating complete all as specified and directed. Make : Havells Cat part No-AHFSXXW101, Legrand Cat Part No-573400, Indoasian Cat part No-810600

S&F modular switch single pole, two way 6 amps with IP 20 rating complete all as specified and directed. Make : IndoAsian cat part No 810610 or equivalent in Havells or Legrand

S&F modular bell push 6 amps with IP 20 rating complete all as specified and directed. Make : Havells Cat part No-AHFSBLW101, Legrand Cat Part No-673404, Indoasian Cat part No-810615

S&F 16 Amp rating modular switch one way one module with IP 20 rating complete all as specified. Make : Havells Cat part No-AHFSXXW161, Legrand Cat Part No-573410, Indoasian Cat part No-810601

S&F modular socket out let 230 volts grade (as catered in point wiring above) of following ratings:-

6 Amp - 2/3 pin combined 2 module complete Havells Cat part No-AHFKPXW065, Legrand Cat Part No-573470, Indoasian Cat part No-810620

16 Amp - 2/3 pin combined 2 module complete Havells Cat part No-AHFKCXW163, Legrand Cat Part No-573470, Indoasian Cat part No-810621

S&F electric bell AC 230 Volt complete all as specified and directed. Make : Indoasian Cat part No 810643 or equivalent in Havells/Legrand

S&F ceiling rose 3 terminal / PVC insulated body ISI Marked all as specified.

S& F in replacement of modular MCB SP 16Amps, 240V, 10KA, C Curve filled in main switch board, including 2.5 sqmm wire connecting socket & modular MCB complete all as specified and directed by Engineer-in-Charge. Make: Cat No DHFNCSPA016 of Havells or equivalent in legrand/L&T.

M&L in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed.

M&L in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 6 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 06 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed.Make:-

S&F factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.

Supply and fixing MCB, 240V 10KA, B curve/C curve as per site requirement of following poles and current carrying capacity in the MCB DB complete with connection testing. :- Make for item No 118 (118.01 to 118.03) : Make of MCB will be same as that of DB.

MCB SP 5 to 32 Amps

MCB SP 40 Amps

MCB SPN 32 Amps

M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25x4 mm up to 7.50 RM bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board / test point (including test point) at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh etc including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil all as specified.

M&L in replacment earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or burid in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing as required 25x4 mm galvanised iron strip all as specified.

S&F LED Tube Light of 20 Watt 230Volt (approx size 4 ft), box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size having min P.F >0.95, minimum efficacy-120 lumen/watt, IP 20 rating complete all as specified.

S&F in LED Tube light fitting 10 watt (approx size 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable having min P.F >0.95, minimum efficacy-120 lumen/watt, IP 20 rating all as specified.

Supply and fixing aesthetically designed Wall mounted decorative LED light of 9 W to 15W with fixture complete all as specified and directed. Make : Philips Cat part No Muziris 31434, Lustre Cat Part No Li-3636/1W, Wipro Cat Part No. BW06.

S&F LED Bulkhead fitting of 10 Watt 230 Volt, complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified & directed.

Supply and fixing in replacment BLDC ceiling fan 1200 mm sweep, 300 RPM, with remote, 230 volts having full copper motor & ribbed alluminium blades for higher air delivery,powder coating provides longer life complete with accessories including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified & directed. Make : Havells Cat Part No Ambrose slim star 1200, Orient Cat Par No TOME PRO, Bajaj Cat Part No Bajaj Ethora Plus.

Supply and fixing in replacment Metal body Exhaust Fan 300 mm Sweep, 1400 RPM 230 Volt, AC 50 HZ including louvers. The rate includes making proper arrangement for fixing i.e. cutting bricks/stone boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified & directed. Make : Havells FHVVEMTBRN12/Crompton Cat part No DE-022/Usha Cat Part No 151022661

Supply and fixing in replacment PVC body Exhaust Fan 200 mm Sweep, 2370 RPM 230 Volt, AC 50 HZ including louvers. The rate includes making proper arrangement for fixing i.e. cutting bricks/stone boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified & directed. Make : Usha style name modern Crisp Air VX/ Bajaj maxima 250 /Havells Ventil Air DX.

Supply and fixing in replacment electric water heater of capacity 25 litre, BEE 5 Star rated heating element upto 2 KW with glass line inner tank with whirlflow technology , Mg anode rod, IPX4 high strength polymer body complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Note: 1.Old items recceived from item No. 20 to 23 deposited in MES store yard 2. The contractor needs to submit manufacturing warranty of geyser of minium two years to engr-in-charge. Make:- Bajaj Shield Series New Shakti, Usha Cylandra, Crompton ARNO Neo.

S&F factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link excluding MCCB & MCB SP as out going complete all as specified & directed.

Supply and fixing MCCB, 4 pole, 415 volt of capacity 100 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc. and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed.

Adhunik Builders (BID ID -3334069)

Parveen Builders (BID ID -3333241)

tarun construction co (BID ID -3333655)

M/S Sunil Steel Works (BID ID -3332689)

M/S ANIL KUMAR (BID ID -3331743)

MB Enterprises (BID ID -3333263)

L G BUILDERS (BID ID -3338102)

BRIJ MOHAN LAL AND CO. (BID ID -3333831)

M/s R. K. Bhambri (BID ID -3338191)

M/S Chhavi Constructions Co (BID ID -3338090)