Loading
Loading…
Loading…
Tender Value
₹82.8 L
EMD Value
₹1.7 L
Closing Date
25 Apr 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking/ Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking or Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPAC's at Panel Interlocking stations/Electronic Interlocking stations.
14 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
1. Signaling arrangements inconnection with proposed slewing of Track and shifting Points,Signals and Locatio boxes at Moula - Ali. 2. Secunderabad Division- Signalling cable shifting for proposed construction of Two lane ROB at Km No. 274/23-26 between PBP-ZN stations (DEPOSIT WORK - NHAI) 3. SIGNALLING AND TELECOM CABLES SHIFTING FOR PROPOSED CONSTRUCTION OF 6 LANE NEW ROAD OVER ROAD (ROR) AT KM NO. 7/2-3 BETWEEN SNF - AMQ STATIONS. (DEPOSIT WORK - NHAI) 4. SIGNALLING ARRANGEMENTS AFOR PROPOSED ADDITIONALSPUR line towards BPQ and at MANIKGARH (MAGH) STATION.
C-SG-36-544
C-SG-36-544
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹1.7 L
25 Apr 2025
4 Apr 2025
150 items across 4 schedules · ₹82,77,936.51 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | "Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/2378 (Single) (Apparatus case Single)"(TO BE INSPECTED BY RITES) | Numbers | 17.00 | 16,216 | 2,75,672 |
| 2 | Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/2378 (Half) (Apparatus case Half)(TO BE INSPECTED BY RITES) | Numbers | 2.00 | 8,083 | 16,166 |
| 3 | Supply of 'E' type locks of different wards as per requirement with key per E- type lock to Drg. No. SA.3376/M/Latest and RDSO Specn. No. IRS. S.30/64. ( TO BE INSPECTED BY RITES) | Numbers | 56.00 | 1,051 | 58,856 |
| 4 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).( TO BE INSPECTED BYCONSIGNEE) | Numbers | 103.00 | 195 | 20,085 |
| 5 | Supply of Surface Base 140mm dia. CLS post as per DRG.. No. S 2011/M( TO BE INSPECTED BYRITES) | Numbers | 1.00 | 3,476 | 3,476 |
| 6 | "Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest 3.5 Meters long"( TO BE INSPECTED BYRITES) | Numbers | 1.00 | 4,442 | 4,442 |
| 7 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe. Ladder for 3.5m post as per DRG.. No. SA 23150, S 2033 or latest"( TO BE INSPECTED BYRITES) | Set | 1.00 | 5,226 | 5,226 |
| 8 | "Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest 4.5 Meters long"( TO BE INSPECTED BYRITES) | Numbers | 1.00 | 4,710 | 4,710 |
| 9 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe. Ladder for 4.5m post as per DRG.. No. SA 23150, S 2033 or latest" ( TO BE INSPECTED BYRITES) | Set | 1.00 | 6,432 | 6,432 |
| 10 | "Supply of Metallic (MS) colour light Signal Unit. 2 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest" ( TO BE INSPECTED BYRITES) | Numbers | 1.00 | 12,998 | 12,998 |
| 11 | Supply of Ground type position light shunt signal complete with base, pipe, arrow mark and hoods as per RDSO DRG. No. SA 23840 or latest. ( TO BE INSPECTED BYRITES) | Numbers | 3.00 | 6,083 | 18,249 |
| 12 | Supply of Post type position light shunt signal with hoods, arrow mark and offset bracket to suit 90mm sockets (CLS) with two numbers of 'U' bolts and nuts complete to fix shunt signal below main stop signal as per RDSO DRG. No. SA 23840 or latest ( TO BE INSPECTED BYRITES) | Numbers | 1.00 | 3,502 | 3,502 |
| 13 | "Supply of Ground connections for point machines Ground connections for universal point machine143 mm with 'D' type clamp for 52kg/ 60kg/ 90R rail as per Drg. No. RDSO/S3267-74" ( TO BE INSPECTED BY RITES) | Set | 4.00 | 8,670 | 34,680 |
| 14 | "Supply of GI termination box (10 SWG) for point machine of size 45 cmx23 cmx12 cm with double coat of enamel paint (outside: Black & inside: white) along with 2no's of MS angle of size 50x50x6mm of length 1000mm each, 2 numbers of 40mm GI pipe of length 450 mm & 150 mm with nuts/washers and teak wood plank of size 40 mmx25 mm for fixing of terminals. (All materials are to be arranged by the contract ) (TO BE INSPECTED BY CONSIGNEE) | Numbers | 4.00 | 2,902 | 11,608 |
| 15 | Supply of Track feed battery charger to work on 110V AC for charging1or 2 or 3 or 4 lead acid cell of 80AH (10Amps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver 1.0 latest.( TO BE INSPECTED BYRDSO) | Numbers | 3.00 | 8,294 | 24,882 |
| 16 | Supply of Track Feed Regulating Resistance disk type 0 to 30 as per DRG. No. SA 20161 66/M or latest. To be procured from RDSO approved firms.( TO BE INSPECTED BY RDSO) | Numbers | 3.00 | 358 | 1,074 |
| 17 | Supply of B type chokes to as per specification IRS: S65- 83 Amd.1 or latest.( TO BE INSPECTED RDSO) | Numbers | 6.00 | 2,313 | 13,878 |
| 18 | "Supply of Track lead junction boxes fibre glass as per DRG.No.CWM-00597 of F.R.P material to and specification IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx5mm, 0.9m long, two numbers of G.I pipes of 25 mm dia, 500 mm long along with nuts and bolts and 500 mm long (grommet bushes, 60 mm ARA terminals-2 No's). (This includes gromile bushes,60mm PBT Terminals)." ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 15.00 | 1,546 | 23,190 |
| 19 | Supply of Channel bond pins 7mm dia single groove as per specification IRS: S 17-75 Amd.1 or latest. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 500.00 | 3 | 1,500 |
| 20 | Supply of titanium coated 7.2 mm drill bits of Bosch/Addision make.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 20.00 | 146 | 2,920 |
| 21 | Supply of Galvanised Wire rope 6/19 steel, 6 mm dia with fibre core as per specification IS 3459/2004 or latest( TO BE INSPECTED BYCONSIGNEE) | Kg | 100.00 | 80 | 8,000 |
| 22 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60- 78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QN1- 8F/8B, 24 V DC. The interlocking code: ABCDF.( TO BE INSPECTED BYRDSO) | Numbers | 8.00 | 4,400 | 35,200 |
| 23 | QN1-12F/4B, 24 V DC. The interlocking code: ABCDE. ( TO BE INSPECTED BYRDSO) | Numbers | 8.00 | 4,283 | 34,264 |
| 24 | QNA1- 8F/8B, Interlocking Code: ABDGH as per Spec BRS 931 A or Latest ( TO BE INSPECTED BYRDSO) | Numbers | 10.00 | 4,738 | 47,380 |
| 25 | QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Spec BRS 931 A or Latest ( TO BE INSPECTED BYRDSO) | Numbers | 10.00 | 4,413 | 44,130 |
| 26 | QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II). ( TO BE INSPECTED BYRDSO) | Numbers | 10.00 | 5,062 | 50,620 |
| 27 | QSPA1- 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest. ( TO BE INSPECTED BYRDSO) | Numbers | 5.00 | 6,465 | 32,325 |
| 28 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips).1 ( TO BE INSPECTED BYRDSO) | Numbers | 10.00 | 5,841 | 58,410 |
| 29 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60- 78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QBCA1- 2HF/4B, Interlocking code: BCEJK a s per specifications BRS 943 or Latest ( TO BE INSPECTED BYRDSO) | Numbers | 10.00 | 8,307 | 83,070 |
| 30 | Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for railway signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per specifications: BRS 939A & 966 or Latest, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) with interlocking code FGHKX. ( TO BE INSPECTED BYRDSO) | Numbers | 5.00 | 4,806 | 24,030 |
| 31 | Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76- 89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge.( ITEM UNIT IS Coil) ( TO BE INSPECTED BYRDSO) | Numbers | 70.00 | 1,153 | 80,710 |
| 32 | Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76- 89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.(ITEM UNIT IS Coil) ( TO BE INSPECTED BYRDSO) | Numbers | 10.00 | 2,908 | 29,080 |
| 33 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100- meter coil. Colour to be specified by Engineer in charge. ( TO BE INSPECTED BY CONSIGNEE) | Metre | 300.00 | 391 | 1,17,300 |
| 34 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge. ( TO BE INSPECTED BY CONSIGNEE) | Metre | 300.00 | 178 | 53,400 |
| 35 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. ( TO BE INSPECTED BY RDSO) | Metre | 700.00 | 124 | 86,800 |
| 36 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity ( TO BE INSPECTED BY RDSO) | Numbers | 75.00 | 220 | 16,500 |
| 37 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge. ( TO BE INSPECTED BY RDSO) | Numbers | 130.00 | 31 | 4,030 |
| 38 | Supply of Terminal Block Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 110.00 | 97 | 10,670 |
| 39 | Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 250.00 | 406 | 1,01,500 |
| 40 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 - 2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set)" ( TO BE INSPECTED BY CONSIGNEE) | Set | 550.00 | 703 | 3,86,650 |
| 41 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 (TO BE INSPECTED BY CONSIGNEE) | Set | 15.00 | 64 | 960 |
| 42 | Supply of Lugs and eyelets:- Aluminium lugs 25 sq.mm of reputed make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 50.00 | 25 | 1,250 |
| 43 | Copper lugs 10sq.mm of reputed make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 250.00 | 12 | 3,000 |
| 44 | Copper eyelets to suit 16/0.2 wire Dowell's or similar make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 500.00 | 3 | 1,500 |
| 45 | Copper eyelets to suit 10.sqmm wire Dowell's or similar make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 250.00 | 6 | 1,500 |
| 46 | Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size: Hylam Sheet of size: 2400mm x1200mmx6mm. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 2.00 | 7,124 | 14,248 |
| 47 | Small Sized Valve Regulated Lead Acid Batteries of 12V/7.0 Ah/ 12P70 with 2 Years Brand: EXIDE or similar (TO BE INSPECTED BY CONSIGNEE) | Numbers | 5.00 | 881.74 | 4,408.7 |
| 48 | Supply of Tool Kit as under : 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S IR) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. 14. Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No. 34. Meggar - 1 No. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 2.00 | 46,332 | 92,664 |
| 49 | "Supply of Digital multimeter Specifications: digital TRMS 5 Digit 60000 counts with following features Frequency range: 6Hz to 1MHz Frequency mv AC band width: 100KHz AC voltage rage: 1mV-1000V, +/- 0.5% DC voltage rage: 1uV-1000V, +/- 0.05% AC current rage: 1uA-10A, +/- 0.5% DC current rage: 1nA-10A, +/- 0.2% Capacitance range: 1pF-10000uF Datalogging: 32000 Readings Dual display: Available Other features: Temparature messurement, Diode, continuty, Duly cycle measurement, self battery voltage measurement, Low pass filter, Min, Max and Average value recording, Back light, Bargraph, Protective rubber holster. Model no: Rishabh 6016 or Similar" (TO BE INSPECTED BY CONSIGNEE) | Numbers | 2.00 | 15,157 | 30,314 |
| 50 | Supply of Double key lock for relay room. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 13.00 | 1,233 | 16,029 |
| 51 | Supply of Cable Route Locator set consisting of receiver with active line trace frequency, passive line trace and depth measurement on active line tracing with 5 watts cable line transmitter with frequency indicator, power indicator, frequency mode sheet, power 'ON' & 'OFF' indicator mode toggle induction mode. High voltage warning and suitable rechargeable cells for both transmitter and receiver with suitable charger with carrying case. Make RIDGID SeekTech SR-20/ Stanlay ST-Loc 10 or equivalent or better as approved by Engineer In charge. (TO BE INSPECTED BY CONSIGNEE) | Per Unit | 1.00 | 3,77,600 | 3,77,600 |
| 52 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A.". (TO BE INSPECTED BY CONSIGNEE) | Numbers | 5.00 | 19,470 | 97,350 |
| 53 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 230V AC input, 24V-30V DC output, 5A.". (TO BE INSPECTED BY CONSIGNEE) | Numbers | 5.00 | 25,960 | 1,29,800 |
| 54 | Supply of Thermo shrink jointing kit for jointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77- 2012 Rev. 3 (Amd. 1 to Amd. 3) or latest. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 6.00 | 3,715 | 22,290 |
| 55 | "Supply of basic material to construct unit Maintenance Free Earth as per specification RDSO/SPN/197 Ver. 1.0 or latest consisting of the following: a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness mini 250 micron and UL listed and marked - 1 No. b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos. c) Copper strip with dimensions 150 x 25 x 6mm to terminate earth rod - 1 No. d) Copper strip with dimensions 300 x 25 x 6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No. e) Copper strip of with dimensions 150 x 25 x 6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No. f) 35 Sq.mm multi-strand PVC insulated Copper Cable (15 meter)." (TO BE INSPECTED BY RDSO) | Set | 2.00 | 16,837 | 33,674 |
| Schedule total | ₹26,74,202.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .