Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC 3609 31A VISHNU GARDEN RAJENDRA PARK GURUGRAM 122001 | GURUGRAM | GURUGRAM | HARYANA | 122001 | ₹1.4 L | L1 | Accepted-AOC AOC |
| 2 | L2₹1.4 L+₹4,795 (3.54%)Rejected-Finance FLAT NO 3 SECTOR 9 GALI NO 8 NEAR HOUSE NO 765 AMBEDKAR NAGAR GURUGRAM HARYANA 122001 | GURUGRAM | GURUGRAM | HARYANA | 122001 | ₹1.4 L+₹4,795 (3.54%) | L2 | Rejected-Finance Due to not a lowest bidder |
Tender Value
₹1.6 L
EMD Value
₹3,200
Closing Date
10 Jun 2026, 9:00 amClosed
ANIL KUMAR
DIV 5 Gurugram
AMtc of HSVP Staff colony in Sector 46, Gurugram. Special Repair of Staff Quarter no. H4, H6, H12 and H13 in HSVP Staff colony in Sector 46, Gurugram.
2026_HBC_526233_1
20267BD79903 F96A 4573 8D47 41FFE4A43CB8256HSV
Open Tender
Civil Works
Works
90 days
Gurugram
2 documents required · 2 mandatory
₹250
₹3,200
Yes
10 Jul 2026
2 Jun 2026
10 Jun 2026
2 Jun 2026
10 Jun 2026
2 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | [11.77]Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. | 60.72 | Sqm | 19 | ₹1,153.68 |
| 2 | [12.25.1.1]Providing and fixing 25 mm thick shutters for cup board etc. : 1.1. Panelled or panelled & glazed shutters :
Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws | 17.4 | Sqm | 2,608 | ₹45,379.2 |
| 3 | [12.36.1]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 2 | Sqm | 2,385 | ₹4,770 |
| 4 | [22.106.1]Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore | 5 | Each | 457 | ₹2,285 |
| 5 | [22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore | 2 | Each | 508 | ₹1,016 |
| 6 | [22.22.1]Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 1 | Each | 3,493 | ₹3,493 |
| 7 | [23.4.1.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A | 90 | Each | 520 | ₹46,800 |
| 8 | [23.4.5.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A | 55 | Each | 999 | ₹54,945 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.88 MB
BOQ_605210.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .