Construction of Silnupul to Tirla road km 0/0 to 3/00

Amount

Earthwork in excavation for structure as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 mtr, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil up to 3 mtr depth, within all leads and lifts as per direction of Engineer-in-Charge.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification PCC 1:4:8, within all leads and lifts as per direction of Engineer-in-Charge.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause 802,803, 1202& 103 P.C.C. Grade M 10 (1:3:6), within all leads and lifts as per direction of Engineer-in-Charge.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause 802,803, 1202& 103 P.C.C. Grade M 20 Nominal mix (1:2:4), within all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying filter media with granular crushed aggregate as per specification to thickness of not less then 600 mm with smaller size towards the soil and bigger size towards the walls and providing over the entire surface behind abutment, wing wall, retaining walls to the full height, completed to firm condition complete as per drawing and technical specification clause 1204.3.8., within all leads and lifts as per direction of Engineer-in-Charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5, within all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying reinforced cement concrete pipe NP-2 for culverts on first class bedding of granular materials in single row including fixing colour with cement mortar 1:2 but excluding excavation protection work and parapets clause 1106. 900 mm dia, within all leads and lifts as per direction of Engineer-in-Charge.

Providing weep holes in brick masonry /stone masonry plain/ reinforced concrete abutment, wing wall, Retaining wall with 100 mm dais PVC. pipe expending through the full width of the structures with slopes of 1 (V):20 (H) towards drawing face complete as per drawing and technical specification clause 614,709,1204, 3.7., within all leads and lifts as per direction of Engineer-in-Charge.

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1, within all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5R.C.C M 25 1:1.5:3, within all leads and lifts as per direction of Engineer-in-Charge.

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202, within all leads and lifts as per direction of Engineer-in-Charge.

Preparation of sub grade by dressing to camber (earth work for cutting involved for sub grade to be paid for separately depending upon the classification of soli completed as per HP.PWD specification, , within all leads and lifts as per direction of Engineer-in-Charge.

Consolidation of sub grade with road roller including making good the undulation etc. with earth of quarry soil etc. and rerolling the sub grade completed as per H.P.PWD specifications, within all leads and lifts as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 405., within all leads and lifts as per direction of Engineer-in-Charge.

CHET RAM

rehana

SALOCHANA DEVI

Gurjeet singh