Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC 00 00 BAIRIYA NEAR KALI MAA MANDIR BALLIA UTTAR PRADESH 277502 | BALLIA | UTTAR PRADESH | 277502 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹41.1 L+₹1.7 L (4.30%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹42.1 L+₹2.7 L (6.92%)Rejected-Finance | L3 | Rejected-Finance Not being L1 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
29 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
SMART COMPREHENSIVE DAY TO DAY MAINT INCLUDING B/R, E/M AND BS IN THE AREA OF NSL, OSL, MKL, KIRAN LINES AND VIJAY LINES MD ACCN UNDER AGE B/R-I,GE(N) AHMEDNAGAR
2023_MES_626715_1
8803 / E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Garrison Engineer North Ahmednagar
Class D Cat a(i)
8 documents required · 8 mandatory
₹500
Garrison Engineer(North) Ahmednagar
₹94,000
Yes
15 Jan 2024
3 Nov 2023
1 Dec 2023
3 Nov 2023
29 Nov 2023
16 Nov 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Note:(i) Contractor's supervisor will report on all working days along with carpeneter,plumber, mason,welder,Electricians etc 0830 hrs at Complaint Cell to receive complaint for plumbing,carpenter works,masonry works,welding and to submit completion report on the same day by 1700 hrs. (ii) Printed complaint slip area wise as per format approved by Engineer-in-Charge shall be provided and maintained by contractor. (iii) Rate quoted shall be deemed to incl the cost of Computer system,Cyber secured installation of App,T&P, equipment, saftey devices etc alongwith sufficient labour to full fill the requirement to the entire satisfaction of Engineer-in-charge. (iv) Cost of labour for providing new items including replacement /Demolition/ dismantling/ taking out/down of old unserviceable item shall be deemed under respective item. (v) Cost of material shall be measured and paid separately under relevant items .If complaint delayed more than 48 hrs, Rs1000/- recovery will be made for each complaint per day (viii) No seperate payment will be paid to any tradesmen and supervisor (ix) All below maint work sites will be handed over in piece meal/patches in any qty and size for execution of the work without damaging the undamaged portion as per user requirement. (x) For the emergency work like water tanks, plumbing fittings etc which effects basic needs, stores will be procured in advance by the contractor and fixed on emergancy basis on short notice
Mason
Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc in patches including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed
Demolition in portions of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.all as specified and as directed
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and as directed
M & L for rendering 15mm thick in patches on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement all as specified and as directed
M & L for rendering 5mm thick in patches on fair faces of brick work or concrete surfaceson ceiling in cement mortar 1:3 , finished even and smooth without using extra cement all as specified and as directed
M&L for rendering in patches 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.
Supply only integral water proofing compound
Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.
S/F Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, of size 600x600, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 .
Same as per item No 12 above but in Patches not exceeding 3 sq.m each
S/F vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36sqm,in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.
Same as per item No. 14 above but in Patches not exceeding 3 sq.m each
S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 300 x 300 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6
Same as per item No. 16 above but in Patches not exceeding 3 sq.m each
M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.
Same as per item No. 18 above but in Patches not exceeding 3 sq.m each
Demolition of unreinforced concrete at any place n exc 15 cm thick
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base in patches all as specified and as directed
Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed and pointed in cement and sand mortar (1:3) etc in patches complete all as specified and directed by Engineer-in-Charge.
M&L for Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face
M&l for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste
M&L for Filleting in any position and to any shape in cement lime mortar 1:3 including all mitres, stops, etc Exc. 25 but n exc. 50 sq. cm
M & L for flush pointing to random rubble masonry uncoursed or brought up to courses in cement mortar 1:4
Painter
M & L applying two coats of OBD over a coat of primer on newly plastered wall surfaces iover 2 coat of wall care putty in patches incl preparation of surfaces all as specified and as directed.
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash in patches all as specified and as directed.
M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls in patches all as specified and as directed
M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
Ditto all as per item No 27 above but on steel surfaces over red oxide primer
Carpenter
Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.
Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.
Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.
Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.
M&l for re-fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.
Re-securing or easing & adjusting, without taking down shutters of any description not exceeding 1 Sqm each.
Re-securing or easing & adjusting, without taking down shutters of any description exce 1.Sqm and not exceeding 2 Sqm each.
S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010
S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides .
S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified inSSR part-I section 8 clause 8.20 (a) fitted to chowkats .
Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.
Ditto all as per item No 46 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.
S&F sheet glass ordinary quality 3 mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.
Ditto all as per item No 48 above but pin head type
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples in patches all as specified and as directed.
Ditto all as per item No 50 above but fixed in repair to steel/wooden shutters
S&F in repair butt hinge, stainless steel 100mm long all as specified and as directed.
S&F in repair butt hinges stainless steel 75mm long all as specified and as directed.
S & F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm
S&F in repair aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.
S&F in repairs Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.
S&F in repairs aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.
Ditto all as per item No 57 above but 150mm long
S&F in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long all as specified and as directed.
Ditto all as per item No 59 but 100mm long
S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.
S & Fin repair stainless steel curtain rods of dia 20mm and thickness of 1mm including brackets etcall as directed in repairs.
M/L for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified .
M&L welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.
M & L Mild steel wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88mm nominal shank dia) n. exc 50 mm long
Dismantling boarding, any description, fixed in wall or ceiling, any position with nails
S & F natural wood colour plastiwood solid WPC sheet 18 mm thickand of density not less than 600 kg/cum complete all as specified and directed by Engineer in charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardant etc., complete, as pecified, supplied and fixed
M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work in patches complete all as specified and as directed
S&F in repair tubular towel rail, chromium plated 20mm dia, C type, 60cm long between flanges. Make of parryware Code :T6001A1 or others equvelent in jaquar and Hindware
Taking down and re-fixing of Harrison/curtain rails, any type anodised aluminium alloy brackets, stops, rollers etc
S & F in repairs Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm
M&L for Beads, I st class hard wood straight ( any size ) for glazed or gauzed joinery renewed including mitres etc. and removing old beads to store
Plumbing
Excavation in trenches n exc 1.5 mtr wide and not exc 1.50 mtr depth and getting out in soft/loose soil. Complete all as specified
Returning filling in incl spreading levelling watering and well ramming in layers n exc 25 cm each layer complete all as specified
Removing surplus & soil to a distance n exn 50 mtr & depositing where directed by engineer - in charge at a level n exc 1.5 mtr above the starting point complete all as specified
S & F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor . Make of parryware Code :Flair C0476 or others equvelent in jaquar and Hindware
S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren
S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed
S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.Make of parryware Code :Flair white E8094 Regular or others equvelent in jaquar and Hindware
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F in repairs 32/40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing
Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing
S & F 15 mm dia Tubes, 'medium grade ' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors
All as per item No. 87 above but for 20 mm dia.
S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. Make of parryware Code :G1951A1 or others equvelent in jaquar and Hindware
S&F 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of essco Code :ORB-105037 or others equvelent in parryware and Hindware
S&F in repairs bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).
S&F in repairs pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)
S&F in repairs nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)
Fixing/resecuring/repair only to existing wash basins Vitreous China (flat back or angle back type) any size on existing brackets or stand.
Fixing/resecuring/repair only in repair to existing Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs
Fixing/resecuring/repair only to existing Gratings, fixed in repairs
Fixing/resecuring/repair only to existing CP bib taps/pillar taps/wall mixture/hole basin mixer with required washer,spindal,nipple,elbow etc , fixed in repairs
Fixing/resecuring/repair only to existing Joint between fluslhing pipe and socket of W.C. pan; pre-made
Fixing/resecuring/repair only to existing Health faucet fixing in pipe etc. complete
Fixing/resecuring/repair only to existing Seat and cover for pedestal pan
Fixing/resecuring/repair only to existing stop cock/angle cock of any size
Cutting existing steel tubing for alterations or additions (Each cut measured) without taking downsteel tubing
S&Fin repair of any type of Elbows/reducer brass both ends screwed and fixed of 15 mm dia
S&F in repair any type of Unions/spindal brass to connect iron to polyethylene and fixed of 15 mm dia in repairs
S&F in repair Unions brass to connect iron to polyethylene and fixed of 20 mm dia in repairs
S&F in repair Nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm- 45gms /25mm- 65gms)
S&F in repair waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms)
S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)
S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union. Make ofessco Code :EOS-542A or others equvelent in parryware and Hindware
S&F in repair shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms
S&F PVC connections 15mm size with PTMT nuts of length 450mm
S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.
S & F in repair 110 mm bore PVC (SWR) bends of any radius.
S & F in repair 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.
S&F in repair PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors
S&F in repair PVC (SWR) bends any radius 75mm bore
S&F in repair PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size mini 815mm x 455mm bowl size 355mm x 355mm x 185mm
Supply and fix syphon kit for low level flushing cistern
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 500 n.exc. 1000 Ltrs capacity incl painting of pate showing the date of cleaning.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of 1000 n.exc. 2000 Ltrs capacity incl painting of pate showing the date of cleaning.
Supply and fix in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) , complete all as specified and directed.
Sewage lines
Cleaning of blocked sewage line of the dia 75 mm to 300 by using bamboo sticks or MS rods and revolving with rope or with sludge sunction /pumping machine inside the sewer line between two manholes and cleaning the sewer line and pouring water under pressure and cleaning and clearing sewer line to efficient and smooth flow of sludge/waste water .
Cleaning of blockage from water closet, Gully trap,nahani trap, floor trap and bends by rodding thoroughly and pouring water under pressure and cleaning and clearing drainage to efficient and smooth flow of sludge/waste water all as specified and directed by Engr-in-Charge (the rates quoted shall be deemed included transport if reqd).
Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
All as per item 130 above but 200 mm bore pipe
All as per item 130 above but 300 mm bore pipe
M&L for 150 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified as following. Note: (i) Cutting into existing sewer line/manhole shall be measured and paid seperately. (ii) Excvation & earthwork shall be measured & paid seperately.
M&L for 200 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .
M&L for 300 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .
M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) for man holes and drain cover slab all as specified and directed.
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips
M&L for dewatering of the following including desluding and pumping out effluent dirty liquid and sludge from bottom of manholes by sewage pump lifting the same upto 4.50 mtr depth of tank/MH incl. collecting sludge and dirty liquid into closed container and cleaning the manholes with fresh water, after wards opening the inlet of manhole for re-use and lifting the sludge to outside premises, as directed by Engr-in-Charge (the rates quoted shall be deemed included transport if reqd).
(a) Manhole of any dimension upto 1.50 mtr deep
(b) Manhole of any dimension exc 1.50 mtr deep but n exc 3.0 mtr deep
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
One light point controlled by switch 5 Amp single pole one way
One fan point controlled by switch 5 Amp single pole one way
One bell point controlled by one switch 5 Amp single pole, one way on independent board
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
One light point controlled by switch 5 Amp single pole two way
All as per Item No 148 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
S&F Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 16 Amp, onw way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc as per existing complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module as per existing etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts ,protection class IP-42, suitable for fixing of MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,or equivalent in Simens/ L&T
S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42,Concealed in wall suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,Concealed in wall protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Simens/ L&T
Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Simens/ L&T
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Simens/ L&T
Supply and fix ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, Lumen output>110 with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge
Supply & fix 10 Watt Linear LED batten Made from polymer extruded channel,with Square profile for glare free light complete all as specified and directed by Engineer-in-Charge
Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make -Bajaj/Crompton/Phillips
Supply & fix replacemnt industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.
Day to day complaints for the following works :- (a) Complaint related to E/M works like repair/refixing of Switches,Switches and socket ceiling light,DBs MCBs Ceiling fan,Exhaust fan etc.by deploying Electrician and helper. (b) Notes for Ser item Nos 141 to 169 :-The quoted rate of Contractor shall comprise the following :- Contractor shall provide sufficient skilled and unskilled manpower on requirnment basis as directed by engineer incharge for attending and completing the complaints as per the users satisfaction. However, the number of skilled and unskilled manpower shall be increased as directed by Engr in charge depending upon the requirement / number of complaints registered at the complaint center. In case of failure on providing suffiiciet manpower by the contractor, a penalty at the rate of Rs 1000 per skilled person per day and Rs 600 per unskilled person per day shall be levied on the contractor and recovery for the same shall be affected from contractor's dues not withstanding the fact if number of complaints of any nature is less or more. Attendance register shall be maintained by the JE for recording the absentee details and the same register will be signed by the contractor/ Supervisor daily, the AGE weekly and the GE on month end. A separate register based on atttendance register for recording recovery of contractor shall be maintained by the JE and the recovery if any will be forwarded to GE every month for necessary action at his end. Any descripancy or contest on the entries in the attendance register shall be written to GE within 48 hours of the entry in the attendance register, if not than the entries done will be binding and uncontested for. The department is not liable for the contractor signature in the register and it is the contractors prerogative to get it signed either himself or his supervisor.
(c) For each complaint, a separate complaint slip shall be prepared by JE/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, compaint slip shall be submitted to concerned executive on the date as per Para above, which shall be got signed from the occupant and shall be produced at the time of payment to be made to the contractor. Complaints pertaining to same location and same nature consisting of replacement of maximum two fixtures in one quarter/ office/ building etc.involving movement of particular tradesman shall be measured and paid as one complaint. Replacement of more than two fixtures but multiple of three fixtures or part thereof in one quarter/ office/ building, etc. shall be measured as additional complaint. (d) Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items. Necessary transportations, tools, plants, ladders, including Screw,nut washers, Insulation tape ,other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost there of shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.(Item no 36 to 48 supply only measured and paid seperately)
Supply only switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
Supply only switch piano flush type single pole, two way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
Supply only Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge
Supply only Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge
Supply only bell push piano flush, single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
Supply only bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge
Supply only stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.
Supply only electronic dimmers,as per existing wattage, 250V flush type on the exiting phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge
Supply only MCB , SP, AC, 240 volts of 06 to 40 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply only fan Condensor Complete all as specified and directed by Engineer in Charge.
Supply only lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
Supply only ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
Supply only in replacement GI Pipe 25 mm dia B Class bend 0.5 mtr length as suitable for fixing security light on wall with nut ,bolt and clamp etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix 200 mm PVC Exhaust fan with complete accessories nut,bolt ,clamp including alternation in existing window making good including deposit old fan to E/M Store yard all as specified by Engineer-in-Charge
Taking out old PVC/Wooden/metal switch board ,wire connection from the wall and fix new backelite sheet including Cutting to suitable for fixing switch/Socket/fan regulater of following sizes .(Note.Damaged Switch/Socket/regulator will be measured and paid Sepereately) (a) 4x4 inches
(b) 4x6 inches
(c) 6x8 inches
(d) 8x10 inches
(e) 10x12 inches
Preparing the old painted surfaces of following steel furniture by removing old paint & touching up with Red oxide primer where necessary & denting where necessary & preparing the surfaces & spray / mannualy painting with two coat of synthetic enamel paint as per existing colour of articles all as specified & directed. NOTE : Spray painting shall be carried out mechanically. 1. Almirah med steel W/S
2. Almirah large steel W/S
3. Book Case steel (Glass door)
4. Chair steel W/O arms
5. Chair CB Steel W/Arm
6. Teapoy varandah
7. Charpoy IP Steel Hardtop
8.Table 900 x 600 W/O drawer
9.Table 900 x 600 with drawer
10. Chair Varandah
11. Shoe Rack Steel
12. Bed Hard Steel
M&L One coat of french polish on wooden surface of any width or girth incl scrapping and cleaning all as per drg and as directed by Engineer-in-charge. Polishing to following wooden furniture items shall be carried out in occupied quarters. 1. Almirah large with shelves
2. Almirah medium 1/2H 1/2SH
3. Almirah medium with shelves
4. Bed with plywood top
5. Book shelf open large
6. Book case small
7. Book case various type
8. Chair Easy
9. Chair Dinning cushioned
10. Chair writing
11. Chair Dinning
12. Hat stand W/M
13. Peg Table
14. Table bed side w/o drawer
15. Teble centre (FD)
16.Table Dinning for 6 persons (FD)
17. Table dressing ladies W/M
18. Table dressing gents W/M
19. Teapoy FD
20. Table writing
21. Locker
22. Table 3' x 3'
23. Table 5' x 2'.10"
24. Chair tipup wooden
25. Table 3' x 2' W/O drawer
26. Table 3' x 2' with drawer
27. Table Dining 04 Person
ASHUTOSH BUILDERS
MS. G.A. CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .