Expansion of Chamber of SE (OP) Circle Faridabad and Conference Hall at Circle office, Faridabad.

Amount

Supplying, installing, testing and commissioning of I/O Jack should be Category 6, TIA568B.2-1 – 250MHz, I/O Jack should be for 100 W, 22-24 AWG copper cable shall: Use insulation displacement connectors (IDC), Information outlet (RJ45 jack) should be covered under ETL Verification program for compliance with TIA568B.2-1, ETL certificate to be submitted with offer the I/O jack should be Blue colour for easy port identification, Operating Life: Minimum 750 insertion cycl

Supplying, installing, testing and commissioning of CAT 6 Patch panel with transmission performance compliance with the ANSI/TIA/EIA 568C.2 standard. Should allow for a minimum of 200 re-terminations without signal degradation below standards compliance limit.Should have self-adhesive, clear label holders and white labels with the panel Panel should be of 1U height with 24 port pre-loaded IO. IDC: Suitable for 22-26 AWG stranded and solid wire compatible with both 110 and Krone punch down tools, Operating Life: Minimum 750 insertion cycles support operating Temperature from -20° to plus 70°

Supply , Installtion , Testing and comissioning of Cat6 2 Meter patch cords Blue Colour with high quality four pair twisted stranded cable terminated with RJ45 tangle free modular plugs at both the ends. The Conductor should be 24 AWG, Multi-strands and Bare Copper Conductor Metal

Supply , Installtion , Testing and comissioning of Face Plate should be Single Gang square plate, 86mmx86mm, should have Write on labels, The Faceplates should have inbuilt shutters which are compatible with any standard colored keystones jacks. The Faceplates are available in one, two and four port variants.

SITC of HDMI cables upto 1.5 meters M2M etc all complete .

SITC of USB cables 10 meters M2M etc all compelte .

Supply and Planting Monstera plant having 3-4 ft height complete.

Supply and Planting Lolina plant having 2-3 ft height with Coco-peat, mud and manure complete.

Supply and Planting Seaforthia Palm having ht. 90cm to 1.20 m with 6-8 suckers, well developed, fresh and healthy lush green leaves from bottom to top complete.

Supply and Planting Rhapis Palm having ht. 90cm to 1.20 m with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top complete.

Supply of full soil fill conical shaped planters of make : vaso eco, model no: c-series: of specified volume and dimensions in stone finish or equivalent. planters to be indigenously made by rotational moulding, with homogeneous recyclable, industrial grade polymer-resin mix, and textured surface. planters should have an integrated water outlet hole and plug, single layered peel-proof construction, light weight, rust proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1 year warranty against any fading or cracking for both indoor and outdoor use. green plant and laying is extra. potting instructions as per company catalogue. - C-1613 - 40 (D) X 33(H) CM : V- 27LTR

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral white, CRI ) 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours: energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear, Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant luminaire with LED (Light Emitting Diode), system power 28 W, luminous flux of luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI)80, colour temperature of 4000K, Neutral white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal wiring, integral Electronic control gear, adjustable suspender, Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm

Supply, Installation, Testing and Commissioing of COB based surface mounted/pendent downlight, system power: 10W, 110 Lm/W, luminous flux of luminaire 1100lm, colour temperature of 4000K, 230V constant current driver, 70% of luminous ?ux after 50,000 operating hours: energy e?cient LEDs, direct light emission, housing in aluminium, round, polyester Silver powder coat applied over a 5-stage pre-treatment, aluminium reflector, 50x80 elliptical beam, Electronic Control Gear, Protection class I, IP20, Ø = 100 mm, H = 165 mm

Supply, Installation, Testing and Commissioning of CAT6 information outlet (I/O) for camera at user end. Approved Makes: Belden/ Siemon/ Panduit/ Der Wiser

Supply, Installation, Testing and Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end. Approved Makes: Belden/Siemon/Panduit/Der Wiser

Supply , Installation , Testing and Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. Approved Makes: Belden/Siemon/Panduit/Der Wiser

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp and hangers etc. in concealed / inside duct / under floor and basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. - 110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp and hangers etc. in concealed / inside duct / under floor and basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. - 75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp and hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. - 32 MM

Providing and fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. - Plain Floor Trap (4` Ht) with 50 / 75 outlet and with height raiser

DSR VRF 5.4 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

DSR VRF 5.2 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply,installation,testing and commissioning of PVC drain water with necessary clamps, fittings such as bends tees etc. and duly insulated. - 32 MM DIA

Supply, installation, testing and commissioning of Inverter type High Wall Indoor Unit with Stabilizer - 2 Tr (Inverter Compressor with stablizer) 5 star AC complete in all respects

Modular kitchen - Under counter storage cabinets: Providing and fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved make- Rehau,Ornare,Senosan. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs (Hettich make) which will be covered with PVC skirting (Rehau or equivalent make ) in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

WALLPAPER : Providing and Fixing Vinyl Coated Wall covering as per approved make and pattern as approved by the client and architect.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (A) 300mmx38mm (GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (B) 225mmx38mm (GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (C) 150mmx38mm (GI)

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (D) 100mmx38mm (GI)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (a) 300 x 300 x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (c) 150 x 150 x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (b) 225 x 225 x 65-90 mm

PandF Wall panelling

Providing and Fixing of GI Clip in perforated Metal Ceiling System of 300x1200 mm module which includes providing and fixing wall angle of size 20x20 mm made of 0.4 mm thick and 35 x 75 mm made of 0.5 mm pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x50x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1200 mm c/c.

Providing and fixing false ceiling light of size 2.00 x 2.00` of 48 watt. Phillips make

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 1200x600mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 1200x600mm FOR SKIRTING ONLY

providing and fixing of Frosted sheet of Glass panes in doors and windows complete in all respect to the entire satisfaction of engineer in charge.

Supply , Installtion , Testing and comissioning of Cat6 1Meter patch cords Blue colour with high quality four pair twisted stranded cable terminated with RJ45 tangle free modular plugs at both the ends. The Conductor should be 24 AWG, Multi-strands and Bare Copper Conductor Metal

Providing and fixing of LED 4 watt Concealed light of approved make having 210 voltage capacity handled cutout size 3 inch round shaped A NSI item

50MM THICK GI FRAME (FOR THICK PARTITION) for MDF : Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first and last fixing point at not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of U Track.

Providing and fixing zebra blinds on windows complete.

WPC WALL PANELLING : Providing and Fixing WPC Wall panelling as per approved make and pattern as approved by the client and architect.

Supply, Installation, Testing and Commisioning of 1 x 4 ft LED Panel with HPE (High-Performance Efficiency), system power: 23 W, Colour temperature of 6500 K, CRI ) 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours: energy-efficient LEDs, direct light emission, Polyester powder black coloured coat applied over a 5-stage pre-treatment, Opal diffuser for homogenous light distribution, electronic control gear, Adjustable wire suspension,Protection class II, IP 20, L = 1200 mm, B = 600 mm

Providing and Fixing High Density Fibre (HDF) Laminate Flooring in different colour and shape having thickness 8 mm laid over 1 mm thick damp proof foam all complete.

Installation, Testing and Commissioning of Switch with at least 24 X 10/100/1000BASE-T POE plus Ports and 2 x 10G Base-T and 4 X SFP plus Ports, Switching capacity should be 168 Gbps, Switch should support 16 L3 IP interfaces, ACL, QOS, VRRPv3, Equal-Cost Multi-Path (ECMP) , UDP helper, Policy-based Route (PBR), 802.1x, Embedded 6 kV surge protection on ethernet ports, Switch should have console port, RJ45 Management Port and USB port, Should support internal/external redudent power supply for 1 plus 1 redundancy and load sharing. Certification: CE, FCC, BSMI, CB and UL. OEM should available in Gartner Magic Quadrant for Wired and Wireless LAN Access Infrastructure Report from latest last three consecutive year.

Supply, Installation, testing and commissioning of 1 U Horizontal Wire Manager 60mm depth (Front Side)

Melamine Polish: Applying one coat of lacquer/primer followed by one or two coat of colour polish to give desired shade and two to three coats of melamine sealer to give final shade including the coats of wood healer and sanding the surface wherever required al complete.

`Providing and fi xing Stainless Steel 304 tower bolts 24 INCHES with nuts and screws etc. complete (OZONE model no -OZ-TB-S 24`` or approved equivalent)`

HOLLOW SS LEVER HANDLE ON ROSE WITH EUROPROFILE CYLINDER ESCUTCHEON , SS MATT (Hafele GEZE 19mm dia lever handle Suitable for 40 to 50mm door thickness, Grub screw fixing onto 8mm x 100mm spindle. For Wooden Doors IN PAIR (Hafele 98302002 or equivalent) `a) GEZE 55mm backset Mortise sash lock, 20mm stainless steel square forend, 72mm center to center with strike plate. With screws for Timber doors/Metal doors (ONE NO.).(Hafele 98484001 or equivalent) b) GEZE 52mm dia with 38mm fixing centers supplied with stainless steel structure 8mm thick (ONE NO.) (Hafele 98482002 or equivalent)` 5 pin Euro profile knob cylnder with 3 keys, 70mm length (ONE NO.) (Hafele 98245213 or equivalent)

Providing and Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width and 100 mm Height) U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

Supply, Installation, Testing and Commisioning of Wall Mounted Filament lights for wall decoration with HPE (High-Performance Efficiency), system power: 20 W in different shapes and design as per direction of Engineer-in-charge.

Supply, Installation, Testing and Commissioning of 15U Rack Unloaded Wall Mount fitted complete

Providing and fixing C.P. brass Health Faucet of standard design and of approved make.

PROVIDING AND FIXING IN POSITION SOAP DISPENSER WITH GLASS BOTTLE WITH NECESSARY FITTING ARRANGEMENTS , COMPLETE AS PER DIRECTION OF THE ENGINEER IN CHARGE (JAQUAR CAT NO. ACN-1135N OR APPROVED EQUIVALENT) etc

providing and fixing stainless steel towel rail jaquar Cat no AQN-7711

Providing and fixing C.P. brass pillar cock of approved quality conforming to IS:8931 :15 mm nominal bore JAQUAR MAKE

Providing and fixing Two in one Angle valve (Jaquar, kohler, equivalent or above make) Angular stop cock with wall plaxpe etc. (make Jaquar) Complete in all respect as per specification and entire satisfaction of Engineer -in-charge

PandF handle stainless steel 11` long all complete as per the directions of Engineer-in-charge

Providing and Fixing table top wash basin withh all accessories Set all complete of jaquar make.

Dismantled Aluminium ( Credit to Work)

Dismantled Iron from structure and angle (CREDIT TO WORK)

Bidder Name

Amount

NARENDER SINGH CONTRACTOR (GSTN-NA) BID ID -1289330

Dal Singh Atri Contractor (GSTN-06AUIPS1758B2ZM) BID ID -1287235

Subhash Chander (GSTN-NA) BID ID -1289517

G L GOLDEN (GSTN-NA) BID ID -1280193

Dynamic Developers (GSTN-NA) BID ID -1284103

NARENDER SINGH CONTRACTOR (BID ID -1289330)

G L GOLDEN (BID ID -1280193)

Dal Singh Atri Contractor (BID ID -1287235)

Dynamic Developers (BID ID -1284103)

NARENDER SINGH CONTRACTOR (BID ID -1289330)

Subhash Chander (BID ID -1289517)

G L GOLDEN (BID ID -1280193)

Dal Singh Atri Contractor (BID ID -1287235)