Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.9 L
EMD Value
₹8,920
Closing Date
3 Jan 2025, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
CONSTRUCTION OF EXTENSION BUILDING OF HASC GYMNASIUM INSIDE HAL TOWNSHIP
7075
E TENDER NOTICE W-05/24-25
Works
Mig Complex- Engine Divn-Koraput-Civil
₹1,120
₹8,920
3 Jan 2025
20 Apr 2024
20 Apr 2024
3 Jan 2025
Labour charges for Earthwork excavation in hard & dense soil for trenches, pits and tunnels etc. not exceeding 1.50 mtr wide and upto 1.50 meter depth below average ground level & getting out including shoring , shuttering for protecting the sides of foundation , pumping , baling of water so as to keep foundations in dry conditions at any stage of work and drain the water away from the site of work without any extra paymet for levelling, ramming the bottom of excavation etc. all complete as per specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials, providing, filling, leveling, watering and consolidating with approved good quality river sand etc from approved quarry in layers of required thick in foundation of any depth including for trenches, pits and tunnels sides of foundation, under floor etc. including loading, transporting, uploading, all leads and lifts, labour etc.all complete as per specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials, providing and laying required thickness of PCC (1:4:8) using 40 mm coarse graded hard stone aggregate for levelling course in foundation at any depth including for trenches, pits and tunnels in under floors, mass concrete and other similar works at all levels and heights, elevations including mechanical mixing, transporting and placing at all lifts, vibrating, compacting, levelling, curing, dewatering wherever necessary, the cost of all materials, labour, leads and lifts, tools and plant, machineries etc. all complete as per specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials, providing and laying RCC (1:1.5:3), Nominal mix using 20 mm graded aggregate for the following RCC structures excluding the cost of providing centering and scaffolding and the cost of steel reinforcement which will be measured and paid separately but including mechanical mixing, transporting and placing at all lifts / leads, vibrating, compacting, levelling, dewatering, curing, finishing fair etc. all complete as per specification and direction of Engineer-in-charge.
Supplying,carrying to site all approved materials providing and fixing in position MS bars (TMT bars) conforming to IS-432 / High yield strength deformed bars conforming to IS-1786 of Fe 415 Grade of all dia for reinforcement in all RCC in situ including flooring and precast works at all levels and for foundations, trenches, pits, tunnels, lift pits etc., below finished floor level including cost of supplying, straightening, cutting, bending to shape fabricating and tying with 18 gauge GI binding wire, providing and fixing cement cover blocks, dewatering wherever necessary etc. The rate to include cost of binding wire, cement cover blocks, all cuts and wastes which will not be measured. Only laid weight will be measured including authorised laps etc. all complete as per specification and direction of Engineer-in-charge..
Supplying, carrying to site all approved materials, providing and fixing in position safe , rigid and smooth Centering and Shuttering to all faces of all RCC works using necessary shuttering / centering materials like ply boards, steel shuttering plates, ballahs, planks etc. as may be required with all necessary supports, struts, braces, wedges and other suitable arrangements to support the form work with all necessary fastening materials such as nuts, bolts, nails, steel wire, clamps, providing scaffoldings, ladders, making the form work leak proof, removal of form work after required period to obtain a fair finished surface ,clearing the site etc. all complete as per specifications and directions of Engineer-in -Charge.
Supplying and carrying to site all approved materials, providing and constructing Brick masonry work of required thickness for walls or any other places in all heights using sub class "B" bricks (Class designation 50) of approved quality Fly Ash bricks in CM (1:4) with straight or curved, with erection of safe/ rigid scaffolding and curing etc. all complete as per specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials, and providing 15 mm thick Plastering in cement mortar (1:4) to the exterior / interior surfaces of brick wall / concrete at all heights with erection of necessary scaffolding, including rendering ,floating, finishing the surface even and smooth, curing etc. all complete as per specification and direction of Engineer-in-Charge.
Supplying, carrying to site all approved materials, and providing 20 mm thick screed Plastering in cement mortar (1:4) with punning for laying floor finishes including rendering , floating, finishing the surface even and smooth, curing etc. all complete as per specification and direction of Engineer-in-Charge.
Supplying, carrying to site all approved materials, providing & fixing powder coated anodized aluminium frames & glazing clips as per approved design & drawing for doors, windows,partitions etc. with one or more rebates including jointing cleat, guide rollers.(The minimum thickness of powder coating 50 micron) etc. all complete as per specification & direction of Engineer-in-charge.
Supplying, carrying to site all approved materials and providing and fixing in position sheet glass, ordinary quality of 4.8mm thick, area not exceeding 0.50 sqm in each pane in the aluminium shutter, doors, windows etc. all complete as per specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials providing and fixing in position MS framed work such as grills, gratings with ends of bars, shouldered or riverted, framed gate and bars etc (Confirming to latest edition of IS 2062) using standard section of MS angles, channels, flats, plates etc. The work includes fabrication of various units by necessary cutting, welding, bending, pointing, bolting etc. all complete as per the specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials, providing and painting with Two coats of High gloss Synthetic Enamel Paint (Class – 1 / Grade – 1) confirming to latest edition of IS 2932 of approved make/ shade over a coat of Red oxide / Zinc chrome primer on Steel surfaces at all heights neatly without brush mark. The work shall include preparation of the surfaces by using sand/ emery papers, cleaning, removal of the scales, peeled surfaces, filling the pits/ depressions, nail – holes, knots etc. by putty and applying paint by using brush/ spray to get uniform finish without any patches including erection of safe/ rigid scaffoldings, cleaning the area after painting etc. all complete as per specifications and directions of Engineer-in-charge.
Supplying carrying to site all approved materials and providing Two coats Acrylic smooth exterior paint (weather coat ) of required shade ( Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on plastered surface at all heights. The work shall include preparation of the surfaces by using sand / emery papers , cleaning removal of the scales , peeled surfaces filling the pits / depressions , nail - holes knots etc, by putty and applying paint to get uniform finish without any patches and brush mark including erection of safe / rigid scaffoldings cleaning the area after painting etc. all complete as per specifications and directions of Engineer - in - Charge.
Labour charges for returning / back filling of excavated earth or any other materials in the trench side gaps of foundation, over newly laid sewer line or any other places including spreading, leveling, watering & well ramming in layers not exceeding 25 cm etc. all complete as per specification and direction of Engineer-in-charge.
Supplying carrying to site all approved materials and providing Two or more coats of distempering with 1st quality acrylic distemper( ready mixed) having VOC content less than 50gm /liters of approved manufacturer of required shaded colour including application of one coat of primer complete as per manufacturers specification on plastered surface at all heights. The work shall include preparation of the surfaces by using sand / emery papers , cleaning removal of the scales , peeled surfaces filling the pits / depressions , nail - holes knots etc, by putty and applying paint to get uniform finish without any patches and brush mark including erection of safe / rigid scaffoldings cleaning the area after painting etc. all complete as per specifications and directions of Engineer - in - Charge.
Total
ADD : GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
Add CESS @ 1%
GRAND TOTAL
INSTRUCTION TO TENDERER
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No.
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law.
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both.
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor.
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following.
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider.
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period.
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be.
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT05.pdf
TENDER_DOCUMENT • 2.15 MB
UPBOQ302-2.pdf
TENDER_DOCUMENT • 0.43 MB
GCC-WORKS-NEW-ED-APRIL.pdf
TENDER_DOCUMENT • 0.43 MB
AM.pdf
TENDER_DOCUMENT • 5.21 MB
UNDERTAKING.pdf
TENDER_DOCUMENT • 0.01 MB
EPS.pdf
TENDER_DOCUMENT • 0.02 MB
302-2PBO.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .