CONSTRUCTION OF COVERED SHED ALONGWITH WATER HEATING FACILITY AT SWIMMING POOL AT MRC WELLINGTON UNDER GE WELLINGTON

Lumpsum price worked out by the tenderer for BUILDINGS/STRUCTURES AND OTHER CONNECTED WORKS as listed in Schedule 'A' Part-I

Lumpsum price worked out by the tenderer for SITE HARDSTANDING as listed in Schedule 'A' Part-II

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRICFICATION as listed in Schedule 'A' Part-III

SCHEDULE ‘A’ PART - IV (MISCELLANEOUS ITEMS)

EXTERNAL ELECTRIFICATION Supply, Install, Commissioning and Testing, factory made, CPRI approved LT Panel Board (Panel No. 01), 415 Volts, 50 Hz, 300 Amps capacity, outdoor cubical type, LT distribution switch gear and control gear, leg mounted, totally enclosed cubical type modular compartment, dust and vermin proof IP-54 with neoprene gasket, fabricated out of CRCA sheet of thickness not less than 3.15mm (for outer sheet) and 2mm thick for internal compartment duly powder coated fixed on pedestal made out of 50x50x6mm size angle iron with cable chamber for incoming and outgoing connections comprising for the following including necesary PCC foundation of minimum 0.4m height positioned and fixed with suitable nuts, bolts, washers etc to the pedestal and connecting all incoming and outgoing cables, internally wiring with PVC insulated, copper conductor, FRLS cable, conforming to IS-694, ISI marked of suitable cable size but complete all as specified and directed comprising with the following items:

(a) Aluminium Bus bar, four wire system, 415 Volts mounted on porcelain heat shrinkable insulator and sleeve suitable for 300 A for phases and neutral (b) Incomming MCCB, 4 pole, 200Amp, 36KA rupturing capacity (c) Outgoing MCCB, 4 pole, 160Amp, 36KA rupturing capacity (d) MCB, SP, 10 KA, 10 Amps, B Curve (e) Six stage automatic power factor correction system, 50 KVAR with APFC Relay, MCCB capacitor duty contactor and suitable rating Cylindrical Heavy duty capacitors for improvement of PF from0.8 lagging to 0.99 lagging (f) LED type indicating lamp lamps for all the three phases with different colour lamp red, yellow and green - 01 Set (g) Digital multi function panel meter measuring voltage, Amps with suitable CTs and backup protection - 01 No. (h) Danger Notice Board of size 200x150x1.5mm thick of mild steel sheet with vitreous enamelled white and letter, figure and conventional skull and bones of signal red colour and fixed/rivetted in panel - 02 Nos

Heat Pump Unit (a) Type: Inverter Heat Pump (b) Power Supply: 430V, 3 Phase, 50 Hz (c) Compressor: Scroll Type (d) Heat Exchanger: Titanium (Corrosion resistant for pool water) (e) Refrigerant: CFC-free (R32/ R410A or equivalent) (f) Flow rate - 40 Cum/Hr @ 12 m water head (g) Protection against High/Low pressure protection, Overload protection, Flow switch protection Control System (a) Microprocessor based control panel (b) Digital temperature display and set point control (c) Automatic operation with thermostat (d) Safety interlock with pump and flow system (e) Fuel indication and alarm system Piping System (a) Material: UPVC/CPVC/HDPE (As suitable for heating system) (b) Scope includes: (i) Supply & laying of pipes of 80mm bore with with aprox length 120 RM (ii) Insulation (where required)