8290 REPAIR MAINT TO INTERNAL WIRING CEILING FANS EXHAUST FAN SUB MAIN EARTHING GEYSER ETC AT VARIOUS OTM LOCATIONS EXCEPT DOCKYARD UNDER AGE EM OF GE NW KUNJALI

Amount

Disconnecting & taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing with specified quilty grease & re-assembling the ceiling fan as a one unit, complete all as specified. Note: Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A'

M&L for hanging ceiling fan in position & re-comissioning the same including making electric connection complete all as specified & directed

All as per sel No. 02 here in before but of exhust fan/wall mounted fan any make & size complete all as specified.

M&L for fixing Exhust fan//wall mounted fan in position & re-commissioning the same including making electric connection complete all as specified and directed.

Preparation of painted surfaces of ceiling fan of any make & size & applying one coat of synthetic enamel white paint by spray painting including making of MES No/Unit name bottom of the fan by applying balck paint complete all as specified & directed.

All as per srl No 5 above but gray paint/green for exhust fan/Air circulated fan size & make all as specified.

M&L for replacement of short circuit/over heated winding from stator of ceiling fan of any make having 1200mm sweep with matching gauge & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling complete re-assembling of fan with testing etc all as specified & directed.

All as per srl No 7 here-in before but exhust fan any make having 300mm sweep.

All as per srl No 7 here-in before but exhust fan any make having sweep more than 300mm sweep up to 450mm sweep complete all as specified

Replacement of gun metal bush with sutable size for ceiling any make any size and sweep. Make: Bajaj/Khaitan/Oriental

Supply only ball bearing suitable for 1200/1400 mm sweep ceiling fan of any make complete all as specified and directed . Make - SKF or equivalent as approved by GE

Supply only ball bearing suitable for 300/450 mm sweep exhaust fan of any make complete all as specified and directed . Make - SKF or equivalent as approved by GE

Supply and fixing in replacement of canopy (top& bottom) of ceiling fans any make/size with canopy of matching colour. Make: Bajaj / USHA/CG/Havells.

Supply and fixing in replacement of rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan.

Supply and fixing in replacement of down rod with clamps etc ceiling fan with down rod of 15mm bore medium grade GI pipe 0.30 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quility all as specified & directed.

All as per sel No 15 above but 0.45 metre long.

S&F on replacement of connector block of ceiling fan suitable size of approved quality.

S&F on replacement of capacitor of ceiling fans with capacitor having capacity 2.5mfd. Make-Bajaj/Khaitan/oriental/Ducati/Seimens/ Hevells.

All as per sel no 18 here-in-before but of capacity 3.15mfd.

All as per sel no 18 here-in-before but of capacity 4.0mfd.

S&F in replacement of blade of ceiling fan of any make with aluminium blade duly painted of sweep 1200mm including provision of screws etc fixing purpose complete all as specified & directed. Make:- Bajaj/CG/Havells/Cromton

S&F in replacement of Exhaust fan blade, heavy duty 300mm sweep. Make:- Bajaj/CG/Havells/Cromton

S&F in replacement of Exhaust fan blade, heavy duty 380mm sweep. Make:- Bajaj/CG/Havells/Cromton

S&F in replacement of Exhaust fan blade, heavy duty 450mm sweep. Make:- Bajaj/CG/Havells/Cromton

S&F in replacement of hanger clamp assembly of down rod for hanging of ceiling fan with nuts,bolts,washers & split pin complete all as specified & directed by EIC.

Fabrication and fixing of ceiling fan hooks and clamp with nuts ,bolts and washers and complete works required at site for fixing of hooks all as specified and directed.

S&F in repairs of 0.71mm thick powder coated aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter including suitable size of revits/nut bolts complete bending, shaping, drilling, cutting notching and all as specified and directed by EIC.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A all as specified and directed. Make: Legrand cat No 5078 11 or equivalent cat No. in Siemens/C&S.

M&L for sub-main wiring with 2 runs of 2.5 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing and caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviceable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed.

M&L for sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old un-serviceable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed.

M&L for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC capping casing not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc. including taking up/down old un-serviceable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed.

M&L for sub-main wiring with 4 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade Caping casing not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old un-serviceable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note for 30 to 33 : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/Gloster/Plaza (c) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza

S&F in repair of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed. Make: Legrand cat No 507611 or equivalent cat No. in Seimens/C&S. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type vertical type TPN DB 8 Way ,240V with 200A busbar , with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed. Make: Legrand cat No 507782 or equivalent cat No. in Seimens/C&S. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S & F MCCB FP 100 Amps,16KA, complete all as specified and directed. Make : Legrand cat No 420015 or equivalent in Seimens/C&S

S & F MCB SP 6-32 Amps,10KA, 'C' series 240V complete all as specified and directed. Make : Legrand/Seimens/C&S

S & F MCB SPN 63 Amps,10KA 'C' series 240V complete all as specified and directed. Make : Legrand/Seimens/C&S

S & F MCB TP 40 Amps,10KA complete all as specified and directed. Make : Legrand/Seimens/C&S

M&L point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including pvc moulded box/hylem sheet ISI marked fixed on wall for fixing the switches, switch, socket all as specified. Note : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza

(a) One light point controlled by one 5A switch

(b) One Bell point control by one 5A bell push switch

(c) One Fan point controlled by one 5A switch

(d) One 5A switch socket combination on the same board

(e) One 5A switch socket point on independent board

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC moulded box/ hylem sheet ISI marked fixed on wall complete comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed.

M&L point wiring complete with 2.5Sq. mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC moulded box/ hylem sheet ISI marked fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 2.5Sq. mm as earth continuity conductor connected to common earth dolly for 15 amp swich socket on independant board complete all as specified. Note for 41 to 42: (a) Colour coding shall be folowed as (i) Phase- Red/yellow/Blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately (c) Make of wire :- Havells/ Finolex/ Plaza/Gloster/Polycab.(d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza.

S & F switch piano flush type single pole one way,5/6 Amps complete all as directed.

S & F Bell push, 5/6 Amps, 240 volts SP complete all as directed.

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete.

Supply and fix switch socket combination multi purpose 3 pin 15 Amps controlled by one switch flush type 240 Volts AC complete.

S & F fan regulator electronic step type socket size and making all necessary connections complete all as directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC Modular box with cover plate fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for:- Note : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza

(i) One light point controlled by one 5A switch

(ii) One Fan point controlled by one 5A switch

(iii) One 5A flush type switch socket point on same board

(iv)One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note for 49 & 50 : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza (e) Switch socket measured & paid separately.

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by EIC.

S & F modular switch 1 way 6A,1 module all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch 1 way 16A,1 module all as specified and directed. Make: Anchor/Roma/Legrand/C&S

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make: Anchor/Roma/Legrand/C&S

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand/C&S

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make: Anchor/Roma plus/Legrand/C&S

S & F lamp holder PVC/polycarbonate insulated body type complete all as directed. Make : C&S cat No ACBHA006/Anchor/Roma

Supply and fixing in repair walll/surface mounted Sirius series PDC aluminium housing with polycarbonate fiffuser, SMD LED and heat sink integrated with housing 10W LED bulkhead fitting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling including connecting up with twin core copper conductor cable with suitable size and all as directed. Make :C&S cat No LTB10WLED or equivalent cat No. in Bajaj/Havells/Philips/ CG/wipro

Supply and fixing in repair walll/surface mounted 10W LED batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat No LTTB2F10WLED/W or equivalent cat No. in Bajaj/Havells/Philips/ CG/wipro

Supply and fixing in repair walll/surface mounted 20W LED batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat No LTTB4F20WLEDEW BATTEN or equivalent cat No. in Bajaj / Havells/ Philips/ CG/ wipro

Supply and fixing in repair new generation recessed mounted ultra slim panel LED 2X2 Luminaire 36 watt and CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting to modern offices. Suitable for 600 x 600 mm modular/POP/Gypsum ceiling. Make : C&S Cat No: LTCRSLM36WATT2x2 or equivalent cat No. in Bajaj/Havells/Philips/ CG/wipro

Supply and fixing in repair new generation recessed mounting Aluminium housing downlight ultra slim round Luminaire 15 watt and high translucent diffuser provides high quality ecomonic energy saving lighting all as specified and directed by EIC. Suitable for modular/POP/Gypsum ceiling. Make : C&S Cat No: LTCRSLM15HPLEDRND/Wor equivalent cat No. in Bajaj/Havells/ Philips/ CG/wipro

Removing the existing window Air conditioner 1.5/2TR complete including all accessories and closing opening of wall with brick workin cement mortor 1:4, plastering , white washing / destempering to match with surroundings and Shifting of window type Air conditioner including accessories, making suitable size opening in existing wall suitable fixing air conditioner, fixing of wooden frane made out of not lessthan 50x75mm hard wood runners painting, fininshing in cement mortor in 1:4 white wasing / distempering to match with surroundings. at suitable location all as specified & directed by EIC.

M&L for shifting of Split AC unit from existing postion & refixing the new position/location in cluding additional accerssories as required, testing & commisssioning all as specified and directed BY EIC.

Supply and fixing copper tubings of appropriate dia offor suction line & for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing thugh pipe and making good distrubed surface completely.

Disconnecting & taking down old Unservicable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed by Engr-in-Charge.

Disconnecting & taking down old Unservicable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

M&L for removing existing cables over lapped and aligning parallel, cable securing with suitable clamps/saddles etc all as directed .

Dismantling & taking down in replacement of old unservicable under votage trip device for 630-4000A for LT ACB 3 pole air circuit breakers 1000 amp capacity manual draw out type AC 415V 50Hz all as director. Make C&S cat No. CS AUH-V-AWAUHVAB or or equivalent as approved by GE suitable for existing ACB make

Dismantling & taking down in replacement of old unservicable shunt trip & closing coil for 630-4000A for LT ACB 3 pole air circuit breakers 1000 amp capacity manual draw out type AC 415V 50Hz all as director. Make C&S cat No.CS-AVHS-116 or equivalent as approved by GE

S&F in replacement industrial highbay luminaire 240V 150W, LED type with die cast anodized aluminium housing with necessary fixture all as specified and directed by EIC.Make : C&S Cat No LTEHB150WHPLED/LSor equivalent cat No. in Bajaj/Havells/Philips/ CG/wipro

Dismantling old rusted feeder piler box & Supply, fabrication and installation of LT feeder pillar box outdoor type, made out of 3.15mm MS sheet suitable to accommodate 1 MCCB of 63 Amps capacity-1No. Including Digital timer switch of 415 V 3-Phase of 32 Amp rating with Contactor fitted inside steel enclosure.Note: MCCB, Digital timer and Contactor shall be measured and paid separately.

georson constructions

shubham construction

DHARMESH ENTERPRISES