SPECIAL REPAIR TO ROAD FROM CP-01 TO BHANGRA CHOWK AT OLD AMRITSAR CANTT UNDER GE ASR

Amount

Material and labour for preparing of black top surfaces by brushing with wire brushes for removing cakes mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat of paving bitumen at the rate of 05 kg per 10 sqm of road surface complete, all as specified and directed.

Material and labour for premixed bituminous macadam laid, rolled with 8 to 10 tonne power road roller and compacted to required gradient and camber, (consolidated thickness upto 75mm or less) using paving bitumen any penetration @ 4% (VG-30) of weight of road metal, grading-2 (63mm to 40mm) in existing sunken portion of the road surface including sweeping from dust or mud or water, scoring sunken surfaces in road etc cutting edges complete, all as specified and directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (VG-10) @ 5 kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30 mm thick using bituminous (VG-30 )(minimum consolidated thickness) with 5.5% binder content by weight of total mix, rolled and compacted with 8 to 10 Tonne power road roller to required gradient and camber complete, all as specified. Note :- (a) Material for premixed carpet and sand seal coat shall be mixed in hot mixing plant. (b) Mix design of bituminous SDAC will be got done from approved lab. (c) The premix carpet shall be laid with mechanical paver.

Material and Labour for repair to pot holes (for Independent Pot hole) not exceeding 1 Sqm each including sweeping free from dust or mud or water scoring sunken surfaces in road, path etc cutting around edges to at least 30 mm in depth and making good the surfaces by applying a priming/tack coat with bituminous primer (VG-10) @ 5 Kg per ten square metres and putting in premixed carpet and well rammed to a uniform surfaces and sealed with binder 9.8Kg per 10 Sqm, blinded with 0.09cum of stone chipping 6.3mm size per 10 Sqm to match/join the existing road surface, complete all as specified.

Material and Labour for marking lines dashes, arrows, letters etc on road, pavement and the like of any width using thermoplastic compound white / yellow paint, confirming to BIS 3262, and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011 (4th revision), 2 mm thick, hot applied with thermoplastic road marking machine including material and spreading glass beads through spreader attached with the machine complete all as specified and directed.

S&F ROAD STUD yellow colour 110x120x24mm ABS plastic dynamically design having high impact strength, high density and density and fixed with nails and adhesive of size (Model No DA 972 of Dark Eye or equivalent of Makes specified in Appx 'B') complete all as specified and directed.

Supply and fixing for road solar stud size 125x125x25mm made from aluminium alloy and PC construction, solar powered by monocrystal solar panel type of battery one high capacity number CD rechargable battery view distance approximate 1000 metre (LEDs 10mm, 3 pieces each side and total 06 pieces are used for high brightness of red colour) back up 12 hours of continuous lighting at night mounted on concrete or muddy ground water proof and harness tested complete, all as specified and directed. Make :- Model DA-110 of DARK EYE or equivalent of Makes specified in list of Makes.

Kohinoorconstruction Company

M/s Randhawa Builders