Construction of balance items for Water Storage Tank at Lalla Ded Hospital Srinagar

Amount

Providing and laying in position concrete of design mix M-30 grade cement concrete for reinforced cement concrete work( concrete mixer batched), using cement content as per approved design mix but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge All works above plinth level upto floor V level incl curing ,vibrating,finishing etc complete (cement recommended for use JK CEMENT, AMBUJA ACC, ULTRA TECH) Note :the admixture already available at site or provided by the department will be deducted from the bill as per the alloted rates .

Centering and shuttering by a Red wood ply including strutting, propping etc. and removal of form work.

a) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

b) Suspended floors, roofs, landings, balconies and access platforms

c) Columns, pillars, piers, abutments, posts and struts

Brick Masonary in Cement Mortor in 1:6 mix with bricks of class designation 75 in Super-structure upto floor V level (by manual means) including cost and carriage of all materials involved

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more(Steel recommended for use SAIL,TATA TISCON) Note :the steel already placed /erected or provided by the department will be deducted from the bill as per the purchase rates(invoice rates) No extra payment shall be made for chairs laps ,cover blocks)

Providing/Fabrication of Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer ,welded all complete with tack Welding ,gusset plates /bearing plates for Truss as per drawing

P/F of CGI Sheets 0.50mm thick colour coated high rib roofing sheets incl. cost of all nails and screws,caps,washers over screws

Providing and fixing plained eaves boarding.2nd class kail wood 300x40 mm (nominal size)

Providing and fixing of 0.50 mm thick colour coated plain Galvanized sheets in ridges/hips with overall width including fixing with self drilling screws (5.5 x55 mm) with EPDM seal & PVC cap. The job includes cost of all materials and carriage complete. (500-600mm)

Providing and fixing of 0.50 mm thick colour coated Pannel type Galvanized sheetsfor soffit,Canopies under neath overhang of trusses including fixing with self drilling screws ,nails with incl. the jamps 2"x2" at 1'6"x1'6"frames interval (wooden frame work) The job includes cost of all materials and carriage complete.

Providing and fixing of 16 mm dia holding down anchor Bolts 450mm length including nuts and washers complete for holding of steel trusses/frames in roof of the water tank

Providing and fixing of Rain water gutter on the edges of Roofing providing over the Pump room including cost of all material and carriage complete .63 m guage including holding clamps & other accessories 15cm wide, 45cm overall semi circular plain GS Sheet Gutter, bolts, nuts, washers complete matching colour with roofing.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type C including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre

Plastering walls with 12mm thick Cement plaster of mix in 1 : 6 ( 1 cement : 6 fine sand) in walls Including cost of all material

P/A of washable painting of new plasrered/ concrete/ AC Surface with two or more coats of acrylic washable distemper of specified shade and brand of even shade incl preparation of surface by cleaning with brushes incl. cost of sand paper, brushes, ladders

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood incl black japan coating

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class Kail wood(30mm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. first Class kail wood incl. 35mm thick frame work full door including hinges complete.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood (35mm thick)

Providing and fixing bright finished brass handles ISI MARKED with screws etc. complete 125 mm in doors as approved by engineer in charge

Providing and fixing bright finished brass handles with screws ISI MARKED etc. complete 100 mm in Windows as approved by engineer in charge

Providing and fixing bright finished brass tower bolts ISI MARKED (barrel type) with necessary screws etc. complete. : 100x10 mm in Windows as approved by engineer in charge

Providing and fixing bright finished brass tower bolts ISI MARKED (barrel type) with necessary screws etc. complete. : 150x10 mm in in doors as approved by engineer in charge

Providing and fixing bright finished brass door latch ISI MARKED with necessary screws etc. complete. : 250x16x5 mm subject to approval by engineer in charge

Providing and fixing bright finished brass hard drawn hooks and eyes 100mm subject to approval by engineer in charge

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cove with Providing and fixing ball bearing for rolling shutters.

Providing,fabrication and laying in position threshing ,grating,welding hoisting of MS trash guard of required pattern and size using Angle iron and flat iron of required size and section at required spacing incld .Its fabrication by way of cutting ,welding etc and making fitting of necessary butt hinges and main hole covers with frame incld .Handling ,rehandling and applying one coat of steel primer (red oxide/anticorrosive)and carriage upto site of work complete

Supply and filling of river bed material/Nallah muck incl. spreading ,levelling ramming,dressing and consolidation incl. wateringIncl. Of all leads and lifts,loading ,unloading headloads cost and carriage of materials from source to site (complete job)compacted /finished item to be measured and paid (incl. Roayalty)(size as directed by engineer in charge)

Supply and filling of local earth by mechanical transport upto a lead of 20km also unloading ,ramming ,watering of the eath in layers is trenches ,plinth,sides of foundation etc complete (including Royality)

Providing and placing in position suitable PVC water stopper conforming to IS :12200 for construction/expansion joints between two RCC members fixed to the reinforcement with binding wire before pouring concrete etc complete sirated with centeral bulb (225mm wide ,8 mm thick )of desired brand as directed by engineer incharge

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified pattern. (Birla make) (including cost of all material, leads, lifts and carriages etc upto site of work complete). 2mm thick

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube, hand rail heavy (C-Class) nominal 40mm dia.

Providing and fixing in position pre-cast RCC Manhole Cover & frame of required shape & approved quality (SSR-2020 Cl. 20.15.4.1) circular shape 560mminternal dia.

M/S MIR CONSTRUCTION