Providing and fixing G.I. Sheet roof at porch repair of retaining wall at open terrace and providing and laying PVC pipe at Kitchen of Hotel Meghdoot Kiarighat Distt. Solan (H.P).

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.63 mm thick with zinc coating not less than 275 gm/m² as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar including carriage of materials within all leads, lifts and heights.

Providing and fixing 110mm dia PVC pipe of standard/approved quality complete including excavation, dismantling old pipe, clearance of sludge, dismantling floor, wall wherever required all accessories as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. Supreme/Finolex/Victus or equivalent make

Providing and fixing stone tile cladding (Heavy Duty) out door tiles (150mm x 100mm) with a minimum thickness of 10 mm of approved shade on a bed of 12 mnm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with spacers in between and flush pointing in epoxy grout with pigment of required shade tomatch the shade of tiles complete as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing corrugated .060 mm G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Please Enable Macros to View BoQ information