Carrying out Zone works for period ending 30.06.2027 on Zone No- 5 Divisional office,BRI office etc including office colony Izzatnagar.

Item Breakup - C-N.S-Items.

Hire charges of TATA 407 or equivalent for local Day shifting.

Hydraulic Excavator of 1 cum bucket.

Hire and running charges of light crane.

Tractor with trolley. Total 489995.00

Item Breakup - D-N.S-Items.

Artisan (Blacksmith 2nd class, Carpenter 2nd Day class, Mason 2nd class & Painter Etc.).

Helper (Technician) Total 2169151.00

Item Breakup - E-N.S-Items.

Stone Aggregate (Single size) : 12.5 mm nominal cum size.

Portland Cement (OPC-43 Grade).

Oxidized mild steel sliding door bolt 300x16 mm.

Oxidized mild steel sliding door bolt 250x16 mm.

Oxidized mild steel tower bolt (barrel type) 200x10 Each mm.

Oxidized mild steel tower bolt (barrel type) 150x10 Each mm.

Oxidized mild steel handles 125 mm.

Oxidized mild steel handles 100 mm.

Oxidized mild steel handles 75 mm.

Block board construction flush door commercial ply on both faces 30 mm.

Coarse sand (zone III).

Synthetic enamel paint in black or chocolate Litre shade.

Synthetic enamel paint in all shades except black Litre or chocolate shade.

100% Premium acrylic dirt resistance, Silicone Litre additives exterior paint.

Structural steel such as tees, angles channels and Quintal R.S. joists.

Mirror of superior make glass 60x45 cm.

Vitreous China pedestal for wash basin.

G.I. Union 15 mm nominal bore.

G.I. Union 20 mm nominal bore.

G.I. Union 25 mm nominal bore.

Polyethylene water storage tank with cover and Litre suitable locking arrangement.

Vitreous China flat back wash basin 550x400 mm. Each

Hydraulic door closer tubular type Aluminum Each section body.

Vitreous China orisha type W.C. pan of size 580 Each mm.

Floor mounted white vitreous China double trap Each symphonic WC with 10-liter cistern and all fittings & fixtures, seat cover etc.

12 mm commercial ply.

Unplasticized P.V.C. connection pipe with brass Each union 45 cm long 15 mm bore.

H.P. or L.P. ball valve with polythene floats: 15 mm Each dia.

H.P. or L.P. ball valve with polythene floats: 20 mm Each dia.

H.P. or L.P. ball valve with polythene floats: 25 Each mm.

C.P. brass waste 32 mm.

C.P. brass waste 40 mm each.

C.P. Brass angle valve 15 mm.

C.P. Brass bibcock 15 mm.

C.P. Brass long nose bibcock 15 mm.

C.P. Brass long body bibcock 15 mm.

Stainless steel butt hinges 125x64x1.9 mm IS: 10 Nos. 12817 marked.

Stainless steel butt hinges 100x58x1.9 mm IS: 10 Nos. 12817 marked. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Stainless steel butt hinges 75x47x1.8 mm IS: 10 Nos. 12817 marked.

Stainless steel kitchen sink - without drain board Each 610x460 mm bowl depth 200 mm.

15 mm PTMT bib cock.

15 mm PTMT bib cock with flange (fancy).

15 mm PTMT bib cock long body with flange.

PTMT pillar cock.

U-PVC pipes (working pressure 4 kg / cm²) Single Metre socketed pipe 75 mm dia.

U-PVC pipes (working pressure 4 kg / cm²) Single Metre socketed pipe 110 mm dia.

UPVC bend 87.5° 75 mm bend.

UPVC bend 87.5° 110 mm bend.

Semi Rigid PVC waste pipe for sink and wash basin Each 32 mm dia with length not less than 700 mm i/c PVC waste fittings.

Semi Rigid PVC waste pipe for sink and wash basin Each 40 mm dia with length not less than 700 mm i/c PVC waste fittings.

Flexible (coil shaped) PVC waste pipe for sink and Each wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings.

Flexible (coil shaped) PVC waste pipe for sink and Each wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings.

Flushing Cistern P.V.C. 10 liter capacity (low level) Each (White) (with fittings, accessories and flush pipe)

UV stabilized 2 mm thick plain FRP sheet.

UV stabilized 2 mm thick corrugated FRP sheet.

4 mm thick ACP.

Galvanized wire mesh of average width of Sqm aperture 1.4 mm and nominal dia of wire 0.63 mm.

8 mm dia C.P. Brass/ S.S. Jet with flexible tube up Each to 1 meter long with S.S. triangular plate for European type W.C.

18 mm thick block board with commercial ply Sqm veneering on both side.

Turpentine oil.

White cement-based putty.

15 mm dia PTMT stop cock (male thread).

20 mm dia PTMT stop cock.

1.0 mm thick decorative laminated sheet. Total 564814.65

Item Breakup - F-N.S-Items.

Providing and fixing PVC false ceiling tiles of Sqm required size in true horizontal/vertical levels suspended on interlocking MS tube grid of section 25mmx25mmx1.2mm. PVC ceiling tiles should have a section size of 6mmx250mm with wall thickness of 0.8mm. Perimeter edge of tiles shall be covered by extruded PVC corner Beeding of size 9mm x 8mm x1 mm. MS tube section grid should be properly secured with walls and anchored to roof with the help of suitable clamps with complete work. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Supplying, erecting and laying in position 3 mm Sqm thick plain embraced polycarbonate sheets of appd. & transparency on the roof in the profile to match the profile of roofing sheets etc.

Providing hand packed dry flat brick flooring, class Sqm designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary) of average thickness 25 mm including ramming sub grade (Flat Brick).

Providing and applying water proofing treatment Sqm to RCC roof slab etc. by application of two coats of cement slurry mixed with water proofing compound (Acrylic based polymer, solid content 30% ± 3, pH >7) in the ratio of 1:2 (1 part of water proofing compound :2 parts of cement by weight), followed by tow coats of single component moisture cured polyurethane based elastomeric water proofing coating conforming to ASTM C-836-89 having tensile strength 3.1 N/mm² . topping layer of 25 mm thick cement concrete 1:2:4 (to be paid separately) to be laid.

Sealing of cracks in roofs by making a V-shaped Metre groove and filling the groove with acrylic-strene based copolymer waterproofing compound.

Providing and applying Asian Royale play metalic Sqm finish texture paint on interior wall surface including making proper base, one coat of primer of approved quality and finishing coat by two coat of acrylic emulsion paint of approved quality, colour & shade complete in all respect, labour, material, T&P, all taxes, GST etc.as per direction of Engineer incharge at site.

Supplying, fixing & installation of wallpaper of Square approved quality, colour & shade complete in all Foot respect, labour, material, T&P, all taxes, GST etc.as per direction of Engineer incharge at site.

Brick work with Railway bricks in foundation and cum up to plinth with 1:6 cement mortar (1 cement: 6 Coarse sand).

Brick work with Railway bricks above plinth level cum and up to floor V level in all shapes and size with 1:6 cement mortar (1 cement: 6 Coarse sand).

Supplying, erecting and fixing precast concrete Each reinforced bench with back rest. Bench shall consist of 2 nos. L shaped base support in natural cement colour of thickness 100 mm, back height 1000 mm, front height 450 mm, base width 620 mm and 5 nos. reinforced concrete planks in red colour and size of 1500 x 100 x 50mm and 1 no. reinforced concrete plank of 150 x 200 x 50mm; manufactured by using M-30 grade concrete & reinforced suitably; all parts to be joined with galvanized nuts and bolts of suitable size. All bolts to be sealed after assembly. Complete job to be done as per directions of Engineer In charge.

Supplying & fixing of 6 mm thick polycarbonate Sqm sheet LEXAN or similar multiwall etc. complete.

Providing and fixing machine-made UV stabilized Sqm fiberglass reinforced plastic sheet roofing (2 mm thick flat sheets) (nomenclature as per USSOR 2012 item no. 103090).

Prov & fixing PVC wall panelling 7 mm thick Sqm (200x3000mm) complete in all respect

Supplying and fixing of Armstrong false ceiling Each panel size 593.3x593.3x14mm IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing and fixing of Armstrong False ceiling (R- Sqm 04-98) I/C all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/architect at site.

Polishing wood work with melamine polish in Sqm approved thinner and finishing as per satisfaction of site engineer. The malamine polish used should be liquid base and and of approved make i.e. Asian/ Nerolac/ Jonson etc. The rate including all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Supply of WEEDICIDE Glyphosate medicine. Total 751153.43

Item Breakup - G-N.S-Items.

Drilling of bore well for specified depth in all types Metre of soil and rock mechanically with all contractor's tools, plants, materials and labour up to 75 meters For (150mm dia).

Providing and lowering 110 mm PVC pipe in Metre boring.

Shrouding of tube well bore by pea gravel of cum Lalkuan size 1.5 mm to 4.7 mm including supply of pea gravel.

Prov & fixing CP Brass Hindwaare or similar.

supplying fitting and fixing of 15mm dia C P brass Each pillar tap long body (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Supplying and fixing C P brass hand faucet shower Each of MARC make or equivalent

Supplying fitting and fixing 15mm dia CP brass Each short body bib cock (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Supplying fitting and fixing 15mm dia CP brass Each longt body bib copck (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Providing and fixing CP brass angle valve (ideal Each orient or equivelent make) complete fitting T & P levies etc.complete as per direction of engineer incharge/architect at site

Supplying and fixing Health faucet jaguar or Each similar make

Providing and fixing CP brass wash basin mixer Each 15mm dia of ISI mark, superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Supplying and fixing C P brass Over Head shower Each of MARC make or similar IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing and fixing rectangular counter wash Each basin with 15mm dia CP brass pillar tap of MARC, equivalent make of superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/ architect at site.

Providing and fixing Wall hanging W C Italian type Each with concealed cistern with SS bottom, superior quality, (Hind ware, pair ware etc.) including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/architect at site. Total 63784.43

Item Breakup - H-N.S-Items.

Removal of trees with roots from the wall.

Annual maintenance of aqua 15Lt/Hour.RO water Each purifier(domestic) AMC, Unit of this item is each per annum. Total 16568.58