REPAIR MAINT TO JOINERY PLASTERING FLOORING PLUMBING SANITARY FITTINGS AND OTHER MISC WORK IN JCO ORS MD ACCN AT MALCOME LINE HD ENCLAVE UNDER GE MIS MHOW

Amount

Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) complete all as specified and directed.

All as per item No 1 above but area exc 1.5 Sqm and not exc. 4.0 Sqm each

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutter of any description n exc. 1 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening after repair work complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.given SSR 2010 complete all as specified and directed.

S & F 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F second class hard wood glazed skelten shutter, 35mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shuters complete all as specified and directed.

S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S&F factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified and directed.

S&F steel ventilator fixed type with glazing bar complete all as specified and as directed

S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Pressed steel frames for doors of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and as directed

S&F Pressed steel frames for doors of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed

M&L Cutting holes in brick/block walls in mud mortar for inserting hold fasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) Type B-1 20mm graded stone agg. as required exc half brick n.exc one brick complete as specified and directed.

M&L Providing, PCC (1:2:4) type B-0 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified and directed.

S & F for mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc all as specified and directed.

S&F for aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section. Complete all as specified and directed.

S&F in repairs of aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S & F for 150 mm long aluminium anodised barrel tower bolts complete all as specified and directed.

S & F in repairs of 150 mm long aluminium anodised barrel tower bolts complete all as specified and directed.

S & F 150 mm long Extruded aluminum anodised alloy handle fabricated type, complete all as specified and directed.

S & F in repairs of 150 mm long Extruded aluminum anodised alloy handle fabricated type, complete all as specified and directed.

S & F for 100 mm long stainless steel butt hinges complete all as specified and directed.

S&F for 100mm long butt hinges, medium weight,cold rolled mild steel, complete all as specified and directed.

S&F in repairs of 100mm long butt hinges, medium weight,cold rolled mild steel, complete all as specified and directed.

S&F for 75mm long butt hinges, medium weight,cold rolled mild steel, complete all as specified and directed.

S&F for 30 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F for glazing with 4mm thick sheet glass ordinary type incl rubber beadings/gaskets around glass panes complete all as specified and directed.

All as per item No. 33 above but for figured glass pin head type. complete all as specified and directed.

S&F for stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs of stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete all as specified and directed.

S&F in repairs of mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

S & F in repairs 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor.complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified and directed.

M&L for preparation of Old painted wooden surface applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed.

M&L for preparation of new steel & iron surfaces of any description, and applying two coats of synthetic enamel paint over 10cm width or girth over a coat of red oxide primer, complete all as specified and directed.

M&L in repairs of 12mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

S&F for 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F for 100mm size Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water ccomplete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on faces of brick work or concrete surfaces, complete.finished even and smooth without using extra cement.complete all as specified and directed.

M & L for rendering 15mm thick in CM (1 : 4) on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement including mixing with liquid WPC complete all as specified and directed. . Note :- Water proofing compound shall be paid separately under Srl no. 53

M&L for rendering 5mm thick on concrete surfaces in CM (1:3) finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified & directed.

M &L for Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted.complete all as specified and directed.

M &L for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L for applying three coats of white wash on new Ceiling,chajja surface including preparation of surface.complete all as specified and directed.

M&L for two coat of exterior weather proof water base emulsion paint white/coloured including a coat of primer and over a coat of white cement base putty (where it is required) on new surfaces complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed.

Dismantling floor hearth or wall tiles including cement mortar bedding, removing tiles and rubbish off the premises complete all as specified and directed

S&F for Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.

M & L for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors over and including 15mm thick screed bed in CM (1:6) , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles. complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 300X200X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM(1:4) complete all as specified and directed.

All as per item No 56 above but in skirting over 10mm thick rendering in CM (1:4) complete all as specified and directed.

Demolition old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring over 20mm cement screed base laid in CM (1:6) , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (mirror polished). complete all as specified and directed.

M & L Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm screed bed in CM (1:4) complete all as specified and directed.

M & L for chequered cement concrete tiles (glossy finish) (40 cm x 40 cm) x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down steel tubing 15mm bore and connections complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore all as specified and directed by Engineer - in - Charge.

S & F for GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.15mm dia complete all as specified and directed.

S & F for GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.20mm dia complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 250 & n exc 500 ltr. complete all as specified and directed.

S & F for 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) (Triple layer) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

S & F 20 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule. complete all as specified and directed.

S & F in repairs of 20 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, screwed for iron pipe or brass ferrule. complete all as specified and directed.

S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe)incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.complete all as specified and directed.

S&F in repair wash hand basins, vitreous china,of size 550mmx400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S & F in repair of 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

S&F for 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repairsof 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete all as specified and directed.

S & F in repair of CP 15mm bore brass fancy type bib taps, screwed down , and screwed for iron pipe or for brass ferrule as fixed in repairs complete all as specified and directed.

S & F in repair of Bib tap PTMT15mm bore standard of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair for PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs of CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs of Wall mixture cromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.Make plumber or equivalent.

S & F in repairs of Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs of health faucet with flexible pipe of one mtr length including stand complete all as specified and as directed.(Make : Jaquar cat part No ALD-565) or equivalent.

S&F in repair of fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and as directed.(Make plumber or equivalent.

S&F in repair of gun metal gate valves 15 mm with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S & F in repairs of CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S & F in repair over head tank cover of 500-1000ltr capacity all as specified and directed by Engr-in-charge.

S & F in repair of stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size (915mmx460mm) bowl size (410mm x 330mm x 160mm) complete all as specified and directed.

S&F in repairs of stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed by Engr-in-Charge.Note : size of plate rack should not be less than (900mmx 1200mm) and weight of rack shall not be less than 8.50 kg each.

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long complete all as specified and directed. Make : Plumber cat No U-0918 or equivalent as approved by GE.

S&F in repairs of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms for kitchen sink complete all as specified and directed.

S&F in repair of gratings round type 125mm size of Stainles steel, (Min Weight 100 gms) complete all as specified and directed.

S&F in repairs of 20 mm dia brass CP tubular towel rail 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs of 20 mm dia SS powder coated curtain rod incl SS decorative brackets, at ends with all arrangements and as approved by GE complete all as spd and directed.

Taking down Old PVC or AC rainwater/waste/vent pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed. .

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls/floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors complete all as specified and directed.

M&L in repairsof 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L in repairs of PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed.

S&F for Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Dismantling Asbestos corrugated & Smeicorrugated etc sheetin in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed at site.

S & F for Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement.complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition/dismantling of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M & L for brick work with modular, sub-class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), complete all as specified and as directed.

All as per sl item No 115.00 but except bricks

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M& L for PCC (1:2:4) type B -0) using 12.5 mm graded stone aggregate 25 mm thick mixing with WPC as in bedding in sunken portions etc complete all as specified and directed. Note :- Water proofing compound shall be paid separately under Srl no. 53

M& L for PCC (1:5:10) mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

S&F for 40mm dia GI Tubing as in spout pipe of medium grade including cutting in any length as required and fixed to wall & floor etc complete all as specified and directed.

M & L for provide water proofing treatment to wall surfaces of any description / heghit and toilet sunken floor/ wall surfaces with ACRYLIC ELASTOMERIC COATING of Dr FIXIT by the following process & specifications :- (a) Preparation of unplastered surfaces by cleaning of dust, washing with water etc and fillig the cracks with cement sand mortar 1:1. (b) Apply two coats of POWERCRETE of Dr FIXIT or equivalant as approved at the rate of 500g /Sqm area for each coat to obtained minimum of thickness of 1mm including grouting of drain out pipe with above chemical. ( after the application of each coat let the surface dry for 5 hrs) (c) Apply 3mm thick APP membrane with Torchen method. complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection,sub base etc.complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Running welding in repairs thickness of metal to be welded n.exc 6mm complete.

S&F in repair 18mm thick factory made PVC celuka ply for kitchen cabinate as in partation, shelves, wall,drawer ,shutter, etc of required colour and size consisting of pannels .The visible edge of celuka ply to be lipped by 18mm width X 2mm thick PVC cladding sheet of required colour and fixed with adhasive etc complete as per manufacturer instruction and directed.

S&F stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F 50mmX15mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F for 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair of modular type stainless steel basket size (0.50m x 0.53m x 0.10m) (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per item no 130 as above but basket size (0.50m x 0.53m x 0.15m) complete as specified and dirceted.

All as per item no 130 as above but basket size (0.50m x 0.53m x 0.21m) complete as specified and dirceted.

M&L for rendering 10mm thick on fair faces of concrete surface of roof in CM (1:4), mixed with liquid water proofing compound @ 200 ml per bag of cement ,finished even and smooth without using extra cement including taking down of old plaster. complete all as specified and directed. (Note:- Liquid water proofing compound to be measured and paid separately under si no. 53)

M & L for water proofing treatment to roof/ chhajja and edges (Vertical or tapered ) etc. in following sequence (i) Properly cleaning and drying the surface (ii) laying APP based polymetric membrane minimum weight 3.5 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric(wt not less than 150 gms/sqm) with 100 mm over lap laid on primed surface by sealed and bonded to the surfaces by torchen method and applying two coats of bitumen based aluminium painting on water proofing treatment incl taking down of existing roof treatment by picking scrapping,blow lamps etc and sweeping cleaning the surface,wash down with water and removal of old rubbish complete all as specified and directed.

M/s Himgiri construction

SUNRISE ENTERPRISES

M/S Sunshine Construction

BHATIA ASSOCIATES