Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.8 LAccepted-Finance | L1 | Accepted-Finance Lowest rate quoted | |
| 2 | L2₹58.1 L+₹30,886.31 (0.53%)Rejected-Finance 3 108 RAJIV NAGAR SOUTH THOLKAPPIYAR STUKKAM PATTUKKOTTAI ROAD THANJAVUR 613001 | THANJAVUR | THANJAVUR | TAMIL NADU | 613001 | L2 | Rejected-Finance Highest rate quoted |
Tender Value
₹57.8 L
EMD Value
₹38,900
Closing Date
10 Jan 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Secretary / Asst. Commissioner
periyanayagi Amman Girls Higher Secondary School, Muthupettai, Thiruvarur District
Construction of four class room building in periyanayagi Amman Girls Higher Secondary School, Muthupettai, Thiruvarur District
2023_HRCE_379235_3
01-L-2023-KAPGHSS
Open Tender
Civil Works - Buildings
Lump-sum
periyanayagi Amman Girls Higher Secondary School
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹38,900
Yes
11 Jan 2024
30 Nov 2023
11 Jan 2024
30 Nov 2023
10 Jan 2024
30 Nov 2023
30 Nov 2023 - 10 Jan 2024
Amount
Earth work excavation for foundation (for narrow excavation) in all soils except hard rock requiring blasting and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound inplaces shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and leveling the site, etc., complete complying with standard specification
Supplying and filling in foundation, basement, etc with filling and in layers of not more than 15 cm thick well watered rammed and consolidated etc, complet compying with standard specification and as directed by the departmental officers
Cement Concrete 1:5:10 (One Cement, Five sand and Eight Hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. And depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and cosolidated etc. complete complying with standard specification.
Supplying and filling GRAVEL Supplying and filling in foundattion and basement with filling crushed stone sand in layers of not more thand 15 cm thick well rammed watered and compacted 1m3 etc. complete complying with standard specification.
Supplying and erecting centering for sides an soffits including necessary supports strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG sliffened with welded Mild Steel angle of size 25 mm x 25 mm x 3mm for boarding laid over silve oak joists of size 10 cm x 6.50 cm spaced at about 90 cm center to center and supported by casurina props of 10 cm to 30 cm dia spaced at not more than 75 cm cenre to centre etc. complete complying with the standard specification (payment for Centering shall be given after concrete is laid).
Footing, Plinth Beam, etc.
Plain surfaces such as roof slab, floor slab, beams, lintels, loft, sill slab, staircase waist, portico slab and other similar works
square and rectangular colums and small quantities such as sunshades, parapet, cum drops, window boxing fin projections and other similar works.
Providing and laying position,Standardised M-30 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50,inculding admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9130 to accelerate, retart setting of concrete, improve workablity without imparing strengh and durability with about (5.0 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of Sand ,but inculding cost of reinforcement grill and fabricating charges,centering and shuttering and also inculding laying, vibrating with mechanical vibrators, finishing,curing,etc,and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra, etc. complete complying with standred specification and as directed by the departmentel officers.the coarse and fine aggregates to be used should comply with the requirments of IS standarts.(No separate payment will be made by the Department for the excess usage of materials.)
Foundation and basement
Ground Floor
First Floor
Terrace Floor
Supplying and fabricating and placing in possition Mild Steel/ Ribbed Tor steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all foors etc. complete complying and standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Brick work in following Cement Mortar 1:5 using best quality II class gound moulded chamber burned bricks of size 9"x4-3/8"x2-3/4" for foundation and basement including curing, etc. complete complying with standard specification.
Foundation and basement
Ground Floor
First Floor
Terrace Floor
Brick partition walls of 11.50cm thickness using best quality II class gound moulded chamber burned bricks of size 9"x4-1/2"x3" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
Ground Floor
Terrace Floor
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc, with cememnt mortor 1:3 hacking the surfaces, providing cement mortor nosing, beading for sunshade, staircases, steps, landing slabs and curing etc. close complain with standard specification and as directed by the departmental officers
Plastering with cemet mortar 1:5,(one cement and five plastering sand)12mm thick in all floors including curing etc,complete complying with standard specifications and as directed by the departmental officers
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly inluding laying, finishing and the top rubbed smooth with power troll, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers (The rate is inclusive of necessary planking for panneling wherevere necessary and as directed by the departmental officers)
Supplying and fixing mild steel grills for windows, ventilators, etc., including priming coat
Supplying and fixting in position steel balustrades using 20 mm square rods spaced at 150 mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separtely) by means of MS flats of size 40 mm x 6 mm in the groove 40mm x 6mm provided at the bottomm of hand ral; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS slat of size 50mm x 6mm shall be provided at the centre of balustrades connection all square rods to the entire length inclusing cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces etc,. complete complying with standard specification and as directed by the departmental officers.
Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting welding and fixing with MS flats (excluding cost of flat), etc. as directed by the departmental officers.
fabricating supplying and fixting in position of steel sheeted windows (Twoleaves) with following specifications. Outer frames of window made of "Z" section F7D of size 35x25x3mm at 1.419 kg/m and mullion "J" Section (F4B) of size 46x25x3mm a t 2.28 kg/m and shutter section of made of F7D of 3325x3mm at 1.419 kg/m as specified in IS 7452/1990 each openable shutter should not exceed a width of 600 mm to enable separate operations and easy maintanace . The panel of the shutters to be covered with 18 gauge cold rolled sheets of superior quality and welded intact with shutter frames horizontal stiffness using 18x5mm MS flat at 0.70 kg/m at 3 nos. for each shutter and addition diogonal stiffness of the same MS flat at all the four corners of each shutters suitable length welded to the shutters for holding the CR sheets in position firmly.
Manufacturing, Supplying and Fixing of Stainless Steel doors with following specification MS angle of size 40x40x6mm at n3.5 kg/m used for outer frame and MS angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame stiffeners with 32 x 6mm at 1.5 kg/m MS flat if provided as the lock rail of the door and weided intact on both ends to the shutter fram 18 GCR sheets of best quality is laid as panel in the shutter frams. 80x5mm at 0.70 kg/m MS flats welded over the 32x6mm at 1.50kg/m MS flat on the rear side of the door, sandwiching the CR sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 Nos. for shutter is provided 6 Nos. of 250 mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided.
white washing two coats with freshly burnt white shell lime in all floors incluing cost of lime, blue powder fevicol type gum, bushes, scaffolding charges etc.. complete complying with standard specifications and as directed by the departmental officers.
Colouring wasing two coats in all floors using best freshly burnt white shell lime and best quality as approved variety of colouring pigment including cost of lime, colouring pigment, fevicol type gum, brushes, scaffolding charges etc. complete complying with standard specification. Mineral Colouring pigments not affected by lime should only be used (Stainless and colour colour solutions should not be used)
Painting new iron works such as steel doors, windows, ventilators. window bars, balustrades etc, with two coats of best approved first quality and colour of synthetic enamel paint over one coat of lime white priming coat in all floors including costs of priming coat etc., complete complying with standard specification. (The make quality and colour of paint should be got approved by the executive engineer before use on works)
Supplyling and fixing fine polished cuddapah slab of 38/40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specifications and as direct.
Supplying and fixing in position best approved BIS quality PVC terrain water down fall pipes having a pressure of 4 kg/sq cm. including cost of necessary PVC shoe. PVC bend, cast iron gratings of required diameter and special clamps, brass scrows, nails, etc. and fixing of cost iron grating at junction of paraper and the RCC roof slab including finishing neatly etc., complet the rate shall be inclusive of cas of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U"clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc, complete complying with standard specification.
Add GST 18%
VK CONSTRUCTION
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_470231.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .