CONSTRUCTION OF REPAIR AND RENOVATION OF CHC AND MCH AT DUNGURIPALI UNDER AMA HOSPITAL SCHEME DURING 2025 26

Earth work in excavation of foundation in hard soil or gravelly soil within 50 m initial loead and initieal lift, including dressing and levelling the bed etc. complete

Drain+Compound Wall Filling in foundatin and plinth with sand watered and rammed including cost, conveyance, cost of materials, T&P, royality etc complete as per direction of the Engineer-In-charge.

Drain+Compound Wall Cement Concrete (1:3:6) in Foundation using 4 cm size bhg metal including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

Drain+Compound Wall Cement concrete work (1:2:4) using 12 mm to 20 mm size black hard crusher broken granite stone chips of approved quality from approved quarry including hoisting,lowering , laying and compacting concrete watering and curing for 28 days including finishing the exposed surface including cost , conveyance, royalties and taxes of all the materials and cost of all labour, T&P required for the work etc. complete in all respect including 1% cess as per direction of the Engineer-in-charge.

Fly Ash Brick masonry with CM (1:6) in Foundation & Plinth including watering, curing with cost, conveyance, royalty and taxes of all materials & labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

Compound Wall Fly Ash Brick masonry with C.M. (1:6) in Superstructure using Fly Ash Bricks including watering and curing with cost, conveyance, royalty and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge.

Ground floor+First floor+Compound Wall 16 mm (5/8") thick cement plaster (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.

Ground floor+First floor+Compound Wall 12mm thick C.P. (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.

Compound Wall R.C.C. M-25 using 20 mm & down size b.h.g.c.b chips including watering, curing with cost, conveyance, taxes and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. A) Column Base

Column / Beam

Plinth Beam

Lintel

Chajja

Roof Slab

Cutting, Bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge.

Approach road Compound wall 6mm thick C.P. (1:4) as ceiling plaster including watering, curing, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. Finishing wall surface to weather coats I.S.I. Two coats Finishing wall surface to weather coats I.S.I. Two coats

Supplying fitting fixing MS Gate as per approved design & quality as per the direction of EIC

Supplying, fitting, fixing of Ceramic Glazed Wall tile in walls on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. Painting 2 coats over a coat of primer to iron workwith all cost complete. two coats with shell lime over a coat of white wash

Finishing wall with Weather coats of approved shade on new work two coats to give even shade including cost, conveyance, taxes with all labour and T&P required for the work etc. complete as per direction of the EIC.

Providing of M.S. Door / Window / Grill gates made out of M.S. Angle, flat, sheet etc. including cost, conveyance, taxes of all materials and labour (T&P) etc. complete.

Labour for fitting, fixing of M.S. Door / Window / Grill gates with C.C. (1:2:4) including cost of all labour (T&P) etc. complete.

Finishing wall surface with Weather Coat (I.S.I) two coats over a coat of primer with approved shade including cost of all materials and labour (T&P) etc. complete.

Finishing wall surface Acrylic wall putty (Water based)with cost of putty &labour.

Weather coat two coats including cost, conveyance, taxes of all materials all labour and T & P required for the work etc complete including 1% cess as per direction of the Engineer in charge.

Distempering two coats to wall with approved distemper of approved shade ncluding cost, conveyance and taxes of all the materials, labour etc complete including 1% cess as per specification and direction of the Engineer-in-charge.

Supplying, fitting, fixing up window/Door (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc.complete as per direction of Engineer-in charge.

12 mm thick cement plaster in C.M. (1:6) over brick masonry finished smooth after racking out of the joints including watereing and curing with cost, conveyance, royality and taxes of all materials and cost of all labour and T&P required for the work including 1% cess as directed by the Engineer-in-charge.

Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Providing & laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

Wall Priming one coat with any approved primer on New Plastered surface of with any approved primer including cost of primer

Removing old grading plaster from roof slab,clearing the surface,lowering and removing the debries within 50m lead

Providing and laying water proofs with polymeric bituminous mambers(Plastic felt) of 2.25kg/sqm and 2mm thickness etc complete.

Providing & fixing of wall panelling made out of Aluminium Section B 9835 as Horizontal & Vertical member placed @ 600 mm C/C covered with 9 mm thick BWR ply and 3 mm thick ACP (Wooden finish of Timex Bond) & applied with approved jointing materials (Silicon) with cost of all materials, labours and T & P, etc complete excluding GST

Supplying , fitting & fixing of two track with mosquito net UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame , shutters and all fitting & fixtures.

Structural Steel work riveted, bolted or welded in built-up section, trusses and framed work including cutting, hoisting fixing in position and applying a primer coat of approved steel primer etc. complete.

Supplying, fitting, fixing of Bhusan colour sheets 0.50mm in roofing including drilling holes in wind ties and fixing with "J" or "L" hooks, fixing of ridges, valleys, wind ties etc. including cost, conveyance and taxes of all materials and labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-Charge.

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles ( CHEQUIRED TILES )

Providing and fixing vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Supplying,fitting and fixing vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tile as per specification and direction of the Engineer-in-charge.

Providing, fitting, fixing of double skinned partition walling made out of OEL Al. Section No. 9210 as single groove as horizontal & vertical member placed at 1200 mm C/C and fixing of 9 mm thick BWR ply to both side and covered with 4 mm thick Sonear make sycamore veneer to both side with PU polishing and jointing angle no. 1855 including cost of all materials and labour etc complete excluding GST

Supplying, fitting & fixing of Storage Cabinet made out of 19 mm BWR Block Board and pested with 1 mm thick sunmica of approved shade to all sides, the front shutter is with 19 mm BWR Block Board with both side sunmica and with all fitting & fixing all exposed edge is fixed with 1 mm sunmica at all sides necessary locking arrangement with cost of all materials and labours etc complete excluding cost of GST.

Fixing tiles (Granite Tiles)in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Supplying and fixing LED letter board including cost of all accessories, materials and Labors & T & P Etc complete exculding GST

Supplying and fixing Steel Site Map and signage including cost of all accessories, materials and Labors & T & P Etc complete exculding GST

Supplying and fixing Name plate including cost of all accessories, materials and Labors & T & P Etc complete exculding GST

Add for fitting fixing of Cupboard and laboratory L.S

Dismantling and removing doors windows and ventilators including removal of frames hinges and fastenings including stacking the usuful materials for re-use and removing the debris with 50.00m lead including cost ofall and complete finished in all respect .

Filling foundation & plinth with excavated earth including cost of labour, T&P etc. complete.

Strecher Lift With Structure

Plantation, Soil Filling and Grass Turfing

PH WORK Earthwork in all kinds of soil with in 50mtr initial lead & 1.50mtr initial lift including rough dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.30mtr in depth & as per the direction of E.I.C.

Earthwork in all kinds of soil with in 50mtr initial lead & 1.50mtr initial lift including rough dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.30mtr in depth & as per the direction of E.I.C.(Hard Soil)

Supplying allmaterials,labour,T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing Brick work with K.B.Brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8% in cm(1:4)including watering,curring, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of E.I.C.

Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of M.H/Septic tank dullyembedded as per direction of E.I.C.

Supplying all labour,T&P and providing 50mm thick precast RCC bafflewalls in cc(1:1.5:3)with 12mm size bhg chips fitted&fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling then after casting including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing MS reinforcement for RCC work including cutting, bending,binding and tying the grills and placing the position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site payment of royalty,taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing RCC(1:1.5:3)with 12mm size bhg chips for RCC works including hoisting,laying,watering,curring,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3) with punning on brick work including watering,curing,conveyance of all material to worksite,payment of royalty,taxes etc all complete as per direction of E.I.C

Supplying all materials,labour,T&Pand providing cement flush pointing(1:3) to brick masonry including watering,curing,conveyance of all materials to worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast M.H cover in cc(1:1.5:3)using 12mm size hbg chips,placing the cover on the MH/S.tank & finishing smooth etc all complete including watering,curing,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing,fitting and fixing of 160mm dia PVC pipe in wall of ST including filling the recess with CC(1:1.5:3)with12mm size BHG chips including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Filling in F&P with excavated materials including watering and ramming as per the direction of E.I.C.

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floor,tread and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tile including rubbing and polishing complete as per the specification & direction of E.I.C. .

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/kodappa tiles on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of E.I.C.

Providing fitting, fixing of Al. door with OELanodized Al. door section of 9202 as verticla member, 9201 as top meber and 9200 as bottom and middle member and 12 mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. 110mm dia PVC pipe

110mm dia.PVC Door Tee

110mm dia PVC Plain Bend

110mm dia PVC offset

110mm dia PVC Cowl

75mm dia PVC Pipe

75mm dia PVC Plain Bend

75mm dia PVC Door bend

125mm dia CP greatings

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages etc.all complete as per the P.H. specification and direction of E.I.C.

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap with Seat Cover to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Parry ware/Hind ware/cera/Equivalent)

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6),moulding&shapping the channel inside & benching with cc(1:1.5:3)using 12mm size HG chip,12mm thick cp(1:3) with punning to inside,cement flush pointing(1:3) to outside,RCC coverslab in cc(1;1.5:3)using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C.

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches (to level or slope) and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design,specification and direction of E.I.C.

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork gravel packing in the rear of well steining,RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all materials to worksite,payment of royalty, taxes etc.all complete as per approved drawing,specification and direction of E.I.C.

Supplying all materials,labour,T&P and fixing of rotational moulded polythene cylindrical water storage tank of 1000litres capacity conforming to IS:1570/1996 including cutting holes through the tank and fixing mild steel tubes&fittings and providing extra tubes and jamnut including hoisting upto a height of 5mt above GL and placing the tank on required position and providing masonry staging with 1st class KB brickwork in cm(1:6),of 0.46mtr height,12mm CP(1:6),RCC beam of 0.25mx0.30mx2.60m in RCC(1:1.5 :3)using 12mm bhg chips including centering & shutering,cutting,bending,binding of rods etc and watering,curing, conveyance of all materials to worksite including cost of 1000litres water storege tank etc.

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. 25mm dia PVC Pipe(External)

20mm dia PVC Pipe(Internal)

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Jaquar /Hindware/Parryware/Equivalent) 15mm dia C.P Bib Cock(L.B)

15mm dia C.P Two Way Bib Cock

15mm dia C.P Pillar cock

15mm dia Angle Stop Cock

15mm dia Concealed Stop Cock

15mm dia C.P. Health Fuccet

25mm dia brass F.W.V

Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C. (Hindware/Parryware/Nycer/Cera/Equivalent)

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC LL flushing cistern of ISI mark of (Parry ware/Hind ware/Nycer) with a pair of C.I/M.S.brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/ PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet, overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Nycer/Cera/Equivalent)

Supplying all materials,labour T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C.

supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C CP Towel Ring

Towel Rail 20mmx450mm

600mmx120mm size plate glass shelf with aluminium guard rails

Glass mirror 600mmx450mm size B.E. Mirror

Sinking of 150mmx125mm dia Tube well Through DTH Rig. Drilling of 150mm dia. Bore:-0.00mtr to 30.00mtr

Drilling of 125mm dia. Bore:-30.00mtr to 90.00mtr and above

Lowering of 150mm dia P.V.C. Casing pipes:00mtr to 30.00mtr

Cost of 150mm dia PVC Casing pipes(SCH-80)- 0.00mtr to 30.00mtr

Cleaning and developing the tube well with their own compressor contineously worked till clean and adiquate discharge is obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of E.I.C.

1.00H.P.Single Phase Submersible Pump Set(1 nos) Supplying of I.S.I.Mark 1.00H.P.Single Phase Verical Submersible Pump Set with discharge of 1800-2200 ltr./hour and a head of 45-60mtr of reputed make like KSB/Texmo & equivalent including all cost, conveyance and taxes etc all complete as per direction of E-I-C.

Supplying all labour,T&P and fitting and fixing of 1.00H.P Single phase vetrical Submersible Pump Set with commissioning and testing etc.all complete as per direction of E.I.C.

Supplying and fitting and fixing of I.S.I.mark D.O.L Starter of reputed make like BCH or equivalent for 1.00H.P Single Phase Submersible Pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of three core flat cable(1.5mm2) of I.S.I. make of reputed company like BCH/Finolex or Equivalent and connecting the pump and starter including all cost,conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of plastic rope MS Well cover,MS Clamp,stainless steel short piece,bend &socket including all cost ,taxes etc all complete as perdirection of the E.I.C.

Supplying and fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying all labour T&P and fitting & fixing of India Mark-II deep well hand pump with cast iron cylinder, 12mm to 16mm dia bright steel connecting rod,32mm dia G.I.pipe of required length with supplying with socket of approved made all complete as per diection of the E.I.C.

Supplying all materials,labour,T&P and construction of washing Platform with earthwork excavation,brick on edge flooring on bed,brickmasonry work in cm(1:4)in F&P,12mm thick CP(1:3),2.5cm A.S Flooring in cc(1:2:4)using 12mm size chips and finished smooth with cement punning including watering,curing etc conveyance of all materials to work site,payment of royalty,taxes etc all complete as per approved specification and direction of the E.I.C

PH Work At CHC

Hot/Cold Water Provision

Water Purifier

Electrical Supply, Installation, Testing & Commissioning of 7 Mtr longGalvanized PU painted octagonal pole with solar pannel of 150watt / 165 watt / 12 v poly (make - luminous) with suitableangel pannel holder and bracket on top of pole with 60 wattsolar LED light (2 IN 1) battery inbuilt in light, fully concretefoundation base with stell rods of jindal, 8 SWG aluminium wirefor earthing of pole, with all other wiring material (3 core 4 sqmm flexible copper DC cable 5 mtr), MC 4 Connector, PoleThickness-3.1mm with foundation nuts and bolts and bracketof suitable for holding 1 No of 60 Watt LED DC light (2 in 1).pole Make (Bajaj or equivalent of Klite/Valmount) with 60 WLED solar DC light with(2 in 1) and battery in built. (Make:-Bajaj/Philips/panasonic)

Video Processor Y21 / USB Drive for Use Pan drive

LAN Card for the use Video Automatic processing by Internet

Audio Spikier 18 Watts & Audio Card

Frame Structure for Sign Board: Supply and Fixing of Steel Frame Structure for Supporting of LED Sign Board made out of 40x40mm, including required Fabrication, 2 cots Gray Painting Asian Paint M.S.Pipe:- 12"X12" Inch

Concrete pillar including cost of sand, cement, chips & Labors etc. 500X450X450 mm size for pedestal of complete unit of sign board. (Including labors & materials)

Installation, testing, Commissioning, Transporting, Labor charges on signboard.

Touch screen based token dispenser - upto 32 services

Token calling unit with LCD display - keys'PREV' and 'NEXT', one CALL'key, one 'RETAIN' key and a 'CLOSE' key

Token hub- 20 ports for Conneting All Devices.

Tolen display unit- single line ; 6 digits; 4 digit for token no, 2 digits for counter no

TV interface unit (model name : LAN_TV_MBD)

32 inch LCD screen for waiting hall

HDMI cable 2 metres

Supply of D-Link CAT6 cable and PVC conduit

Installation testing and commissioning

Supply, Installation, Testing & Commissioning of 55 INCH (139 ml ultra HD (4K) LED smart TV, with launch year must be 2023 inbuilt speaker of minium 40 watt, inbuilt storage memory of minium 8 GB, support ios, android, inbuilt wifi, bluetooth connection port for external USB drive (Make:-SONY /LG/ SAMSUNG)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 16Amp socket outlet and 16Amp Modular switches connection (Make of Modular Switch- Schineider cripsal x panasonic europa/Legrand myrius / L&T englaze or eq or eq)

Supply and fixing of modular 6Amp plug with 6Amp switch on existing board (Make of Modular Switch- Schineider cripsal x panasonic europa/Legrand myrius /L&T englaze or eq

Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire- Finolex /L&T / Havells / polycab) 2x4.0 sq.mm + 1 x 1.5 sq.mm

Wiring to light/ Fan/Call bell/ Exhaust fan (1.5 + 1.5 Earth) Modular Type (Gr.A) (1.1.1)

-do- (Gr.B) (1.1.2)

-do- (Gr.C) (1.1.3)

S/F of M.S. Box for 2 Module 18 swg (1.24.2)

S/F of M.S. Box for 4 Module 18 swg (1.24.3)

S/F of M.S. Box for 6 Module 18 swg (1.24.4)

S/F of M.S. Box for 8 Module 18 swg (1.24.5)

S/F of 5 amp switch and 5A. Socket outlet of ISI marked on existing board (1.25.1 + 1.25.4)(Modular Type)

S/F of 15/16A. F.T. Power Plug & Socket (Modular type) (1.2.7)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.4)

Supply, Installation and commissioning of63 Amp. I.C.D.P. Main Switches (Sl.No. 1502) (IS 13940 Part 3/ 1993) on existing surface complete with H.R.C. fuse links, interconnections, earthing etc. as requiredas per direction of Engineer in- charge (Make Siemens/ HPL/Anchor/L&T/ Havels/ C&S/ R,K,) 2.15.1A

Supply of250 mm x 300 mm x100 mm deep(1.24.13) for fixing 63 Amp ICDP Main Switch.

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of following 4 way single pole and neutral sheet steel MCB 250 V on recessed complete with tinned coper bus bar , neutral bar, earth bar,din bar, detachable gland plate, inter connections, phospatized and powder painted including earthing etc. as required(but without MCB)4 way double door(2.3.5)

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

Earthing with G.I. earthpipe 3 mtr long. including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.2 +3.3)

Supply andlaying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of 4 sqmm S/C wire ISI marked with No.10 G.I. wire duly clipped

Invertor wiring (1x 1.5 sqmm) copper wire (1.19.1)

S/F fo 48" A.C.Cilling fan without regulator including all conections (Model:Havells (Velocity/Spark)/ Usha (Striker Millenium)/ Crompton (Jura)/ Orient (Summer Pride)/ Polycab (Vital)/ Anchor-XL Turbo)

S/F of electronic step type ceiling fan regulator in existing switch board including connection with1.5sqmm FR PVC(1.25*)

S/F of Fan Hook (M-22)

S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton/ HPL/ Havells / Polycab

Supply of instalation, Testing commissioning of 15 Watt. LED bulb

S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required .(1.30)

Supply of 180 mm x 100 mm x 60mm deep (1.24.5) for fixing call bell

S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator

S/F of 2000 VA Inverter with 2 nos. 150 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous)

S/F of 60 watt. Energy efficient LED street light fittingss. (Make- Crompton/Phillips/ HPL/ Havells/ Poly cab

S/F of 2 Ton 5 star Inverter type split A.C. M/C with 5 KVA Voltage Stabilizer (Make - Microtek, V-Guard) with all accessories and connections (Make - HITACHI- R410A-RSOS518HCEPA/ Bluestar- IC524 DATU/ Carrier - Durafresh- Neo-X))

Supply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard)

External Electrical Work

Please Enable Macros to View BoQ information